Question about Computers & Internet

2 Answers

Are there any services or configurations I need to run on my 2003 server before I can join the 2008 server to the domain as a member server. Is it necessary for the 2003 server to be running in the native mode.

Posted by on

  • George Maeweather May 08, 2010

    Are there any services or configurations I need to run on my 2003 server before I can join the 2008 server to the domain as a member server. Is it necessary for the 2003 server to be running in the native mode.

  • George Maeweather May 09, 2010

    I am not trying to convert it. I want it to run as a member server in the 2003 Domain.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi


Thanks for using FixYa. Yes you'll need to upgrade it. Please see the link forstep-by-step procedure to convert server 2003 to 2008---

How toconvert server 2003 to 2008

Please doaccept the solution if the issue is resolved or else revert for furtherassistance.


Thanks
Rylee

Posted on May 08, 2010

  • Rylee Smith
    Rylee Smith May 09, 2010

    In the
    initial issue you asked for any services or configurations to run 2003 server
    before joining the 2008 server to the domain as a member server and I have
    provided you how to configure to run 2003 server before joining the 2008 server
    to the domain as a member server.
    Please do accept the solution
    if the issue is resolved or post a comment for further assistance.









    Thanks


    Rylee



×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,427 Answers

You cant have a 2004 server on the same network as a 2008 server..

the hand shaking protocols (network system) is different.. 2008
for example the DNS and ip protocol... It wont work..

Posted on May 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a problem with Windows Server 2008. When I installed the operating system without a domain controller, so vspace runs without a problem. Once you graduate to the domain server, I can not connect to...


What happened is that when you joined the domain, the W2K8 server's firewall settings probably changed disallowing the device to get activated. Simply run the vSpace installer (while the system is a domain member) and select the option to REPAIR the software. Also, make sure that the background hardware activation setting is turned on. That setting is in the vSpace console under system settings. Lastly, if you're still having an issue, download the latest version of vSpace, v6.1.3.10. Uninstall your current version and install 3.10 after you reboot.

May 23, 2011 | NComputing L300 Terminal Computer PC...

Tip

Reset Password Windows Server 2008, 2008R2


As the popular use of Windows Server 2008, large amount of trivial things come up with us each minute, the occasion that we reset password Windows Server 2008 becomes also common. Therefore, Windows Server 2008 password reset is the necessary technique for us now!


Windows Server 2008 is one of Microsoft Windows Server serials of operating systems. Besides Windows 7, Windows Server 2008 is the latest and more secured versions from Microsoft. Windows Server 2008 has newly added many new functional features included that system administrators of small and large companies will enjoy.


Most of us use Windows 2008 Server as a workstation. That means a group of computers and devices on a network that are controlled as a unit with common rules and procedures. And the host manages these computers through its admin account and password.


If you forgot windows server 2008 password of local admin, I think it is easy for you to recover the password. But what if you forgot windows domain password? Things will get trickier and all of the computers in the domain paralyze. These passwords also called AD password. Before solving your password problem, you need to know what Active Directory Domain Controller is.


What is Active Directory Domain Controller?
A domain controller is a server that is running a version of the Windows Server operating system and has Active Directory Domain Services installed.


When you install Windows Server on a computer, you can choose to configure a specific server role for that computer. When you want to create a new forest, a new domain, or an additional domain controller in an existing domain, you configure the server with the role of domain controller by installing Active Directory Domain Controller(AD DC).


There are differences between Domain and local. A Windows Server domain is a logical group of computers running versions of the Microsoft Windows operating system that share a central directory database. A user may be granted access to a number of computer resources with the use of a single username and password combination.


A Domain Controller allows password authentication throughout a network. What this means is that your password is checked on the central server no matter which machine you log in from. A Domain Controller can also control access to files and directories which can be setup so users have access to all their files no matter which machine they log in from. This also makes adding and removing users among other things much easier as all that is required is a change on the Domain Controller itself rather than every machine on a network.


If you need reset domain administrator password (also called AD password), it will be a tricky thing. However, Ainorsoft Windows Password Recovery can allow you to reset password Windows Server 2008 domain.


Steps for Windows Server 2008 password reset domain:
Step1. Google Windows Password Recovery Corporation, download and install in any available computer.
Step2. Create a bootable CD/DVD or USB flash drive. (A blank CD/DVD/USB Flash Drive is needed)
Step3. BIOS set. Boot computer from the created CD/DVD/USB Flash Drive and set BIOS setup.
Step4. Reset Windows server 2008 or 2008R2 password to Re123456.

on Jan 10, 2011 | Computers & Internet

Tip

How to reset Windows Server 2008 domain password


Windows Server 2008 is one of Microsoft Windows' server line of operating systems. Besides Windows 7.Windows Server 2008 are the latest and more secured versions from Microsoft. Windows Server 2008 has many new features included that system administrators of small and large companies will enjoy. <br /> <br /> Many use Windows 2008 server as a workstation.That means A group of computers and devices on a network that are administered as a unit with common rules and procedures.And the host computer manage these computers through its admin account and password.<br /> <br /> If you have lost windows 2008 server local admin password, I think it is easy for you to recover the password.But what if you have lost windows domain password? Things will get more tricky and all of the computers in the domain paralyze.These passwords also called AD password.Before solving your password problem, you need to know what is Active Directory Domain Controller.<br /> <br /> <b>What is Active Directory Domain Controller?</b><br /> <br />A domain controller is a server that is running a version of the Windows Server operating system and has Active Directory Domain Services installed.<br /> <br /> When you install Windows Server on a computer, you can choose to configure a specific server role for that computer. When you want to create a new forest, a new domain, or an additional domain controller in an existing domain, you configure the server with the role of domain controller by installing Active Directory Domain Controller (AD DS).<br /> <br /> There is the diffence bettwen Domain and local. A Windows Server domain is a logical group of computers running versions of the Microsoft Windows operating system that share a central directory database. A user may be granted access to a number of computer resources with the use of a single username and password combination.<br /> <br /> A Domain Controller allows password authentication throughout a network. What this means is that your password is checked on the central server no matter which machine you log in from. A Domain Controller can also control access to files and directories which can be setup so users have access to all their files no matter which machine they log in from. This also makes adding and removing users among other things much easier as all that is required is a change on the Domain Controller itself rather than every machine on a network.<br /> <br />If you have lost this domain administrator password (also called AD password), it will be a tricky thing.However, Windows Password Key Enterprise can allow you to reset domain administrator password.<br /> Here is the steps to reset Windows server domain password<br /> <br /> Step 1: Download and install Windows Password Key Enterprise in any available computer.<br /> <img src="shalakate.jpg" /> Step 2: Run the software and insert a blank CD or USB Flash Drive to computer.<br /> Step 3: Select Domain Administrator and choose CD/DVD or USB Flash Drive<br /> Step 4: Click Burn to begin bootable disk creation.<br /> Step 5: Insert the newly created CD/USB Flash Drive to your locked computer , but remember you need to set the bios setup , make sure the computer to boot from CD or USB.<br />If you don't know how to set BIOS, take a look this tutorial.<br /> <a href="http://www.lostwindowspassword.com/how_it_works/bios_setting_for_cd.htm">http://www.lostwindowspassword.com/how_it_works/bios_setting_for_cd.htm</a><br /> <br />Step 6: And then you can recover your Domain admin password<br /> <br />Now you can log on your domain admin account and reset a new password.<br />Note: This can also work in Windows Server 2000,2003 <br /> cc

on Nov 29, 2010 | Computers & Internet

1 Answer

Thank you for the last one. know i want to set up mu 3laptops on the windows server 2008 r2 standered and use the server as a domain and the laptops as well like a domain.


first you need to setup the roles in the server, go to the manage server console, ( can be found as a shortcut in the taskbar or under start menu ) then open the console and go to add roles.

1 - add active directory

2 - in the process it will ask you to install the DNS server role ( do it )

3 - after installing the role in the CMD command prompt type DCPROMO

4 - the DC controller installation and setup will beging ( do not do anything during this proccess )

5 - when asked by DC setup to choose what type of domain functionality level do the following

1 - windows 2003 ( this is for compatibility for windows server running 2003 and XP machines )

2 - Windows Server 2008 ( at this point nothing lower than XP can be added to the DC of course domain functionalities will increase - Only other 2008 server domain controller can be added and cluster migration from server 2003 to 2008 is not supported. )

3 - Windows Server 2008 R2 ( at this point only machines running Vista and 7 can be added to domain - windows xp is no longer supported. All the functionalities of the domain controller are available)

keep in mind once you promote the domain controller to a higher level it can't be brouht to a lower level.

once active directory is installed restart you server and the you should be able to add the clients pc or laptos to the DC example

- right click over my computer icon
- click on properties
- computer name
- change the computer from workgroup to domain
- type your FQDN ( fully qualified domain name) example: mynetwork.local or mysite.com
- apply changes and restart
- your computer will be part of the domain next time system boots up.

Mar 01, 2011 | Computers & Internet

1 Answer

Window7 drivers for asus k8vmx


hi

unofrtunately this mainboard is not supported by Winodws 7

Win2003 is about all you'll get (or earlier OS as well)


general information (includes drivers) http://ca.asus.com/product.aspx?P_ID=dJ2XP7zr8tzeYbLp


FYI:

2008 is combination of vista and windows 2003r2. Some new services are introduced in it
1. RODC one new domain controller introduced in it

[Read-only Domain controllers.]
2. WDS (windows deployment services) instead of RIS in 2003 server
3. shadow copy for each and every folders
4.boot sequence is changed
5.installation is 32 bit where as 2003 it is 16 as well as 32 bit, that's why installation of 2008 is faster
6.services are known as role in it
7. Group policy editor is a separate option in ads


The main difference between 2003 and 2008 is Virtualization, management.
2008 has more inbuilt components and updated third party drivers Microsoft introduces new feature with 2k8 that is Hyper-V Windows Server 2008 introduces Hyper-V (V for Virtualization) but only on 64bit versions. More and more companies are seeing this as a way of reducing hardware costs by running several 'virtual' servers on one physical machine. If you like this exciting technology, make sure that you buy an edition of Windows Server 2008 that includes Hyper-V, then launch the Server Manger, add Roles.


3) In Windows Server 2008, Microsoft is introducing new features and technologies, some of which were not available in Windows Server 2003 with Service Pack 1 (SP1), that will help to reduce the power consumption of server and client operating systems, minimize environmental byproducts, and increase server efficiency.
Microsoft Windows Server 2008 has been designed with energy efficiency in mind, to provide customers with ready and convenient access to a number of new power-saving features. It includes updated support for Advanced Configuration and Power Interface (ACPI) processor power management (PPM) features, including support for processor performance states (P-states) and processor idle sleep states on multiprocessor systems. These features simplify power management in Windows Server 2008 (WS08) and can be managed easily across servers and clients using Group Policies


i hope this helps you !

Nov 29, 2010 | Computers & Internet

Tip

How to Reset AD Password for Windows Server 2000, 2003 and 2008?


Have you ever forgotten Active Directory (AD) password? Do you know how to reset AD password? Is there any Windows password reset software to do AD password reset? If not, what to do to reset AD password? Before answering these questions and do AD password reset, you need to what is active directory, Windows domain and domain controller.
What is Active Directory?Active Directory is used by system administrators to store information about users, assign security policies, and deploy software. It was released first with Windows 2000 Server edition and refined further in Windows Server 2008 and Windows Server 2008 R2 and was renamed Active Directory Domain Services. AD components include such domains, domain controllers, trust relationships, forests, organizational units, etc. What is a domain controller?
According to Wiki, a domain controller is a server that responds to security authentication requests (logging in, checking permissions, etc.) within the Windows Server domain. The domain controllers in your network are the centerpiece of your Active Directory service. It stores user account information, authenticates users and enforces security policy for a Windows domain. When you install Windows Server on a computer, you can choose to configure a specific server role for that computer. When you want to create a new domain, or an additional domain controller in an existing domain, you configure the server with the role of domain controller by installing AD DS.
What is a Domain?A domain is a concept introduced in Windows NT whereby a user may be granted access to a number of computer resources with the use of a single username and password combination.
The domain concept not only allows a user to have access to resources that may be on different servers, but it also allows one domain to be given access to another domain in a trust relationship. In this arrangement, the user need only log in to the first domain to also have access to the second domain's resources as well.
So it is hard to say if there any windows password recovery software can reset AD password. Windows password recovery software like Windows Password Unlocker Enterprise can allow you to reset domain administrator password on Active directory for Windows server 2000/2003/2008.
Steps to reset domain administrator password
  • Step 1: Download and install Windows Password Unlocker Enterprise in any available computer.
  • Step 2: Run the software and insert a USB flash drive to computer.
  • Step 3: Select Domain Administrator and target USB drive, and then click the Burn button to start burning an ISO image file to the USB flash drive.
  • Step 4: Click ok when burning process is completed.
  • Step 5: Insert the burned USB flash drive to your locked computer and set the computer to boot from USB.
  • Step 6: Choose the way to reset AD password.
  • 2 options for you to reset domain password
  • 0b60bd0.jpg
  • Option 1: Reset the default domain administrator password to Pa123456
  • Option 2: Reset AD password by creating a specified domain administrator account.
  • Step 7: Click YES to continue and click Ok when the domain password has been successfully reset.
Now you can log on your domain with the user name of administrator and password of 'Pa123456' if you select option 1. If you select option 2, you can log on domain with the username of 'passkiller' and password of 'Pa123456'.

on Oct 13, 2010 | Computers & Internet

2 Answers

How to configure domain


You need to install and run IIS or Apache...they are both web server programs. It doesn't really matter which you use, more of a user preference.

In my case I like to use IIS with Server 2003. Below is a link that is a full guide for setting up your server to host a website. it is step by step and includes pictures along the way. It should have you running in no time!

Step By Step Guide

Feb 23, 2009 | Microsoft Windows Server Standard 2003 for...

1 Answer

Windows vista not join the Domain


please first of all check your windows vista edition,then open the "readme.file" from setup disc or folder of windows 2003 server std.edition.read the if it is written that"windows 2003 server for windows xp,98,vista,etc."if not written vista then it will not join.

May 06, 2008 | Microsoft Windows Vista Ultimate Edition

1 Answer

Logging on to server


You need to go into administrative tools and look for group policy.

In the local computer policy
Computer Configuration
Windows Settings > security settings > Local policies > user rights assignment. In the right hand pane find the policy for "Allow log on locally" Set the user accounts for those users which are allowed to log on interactively on the server. Be careful you dont lock the administrator account out.
Use in conjunction with the "Deny logon locally policy" if you need to.
Hope this helps

Mar 22, 2008 | Microsoft Windows Server Standard 2003 for...

2 Answers

Win server 2003 enterprise


You need to ensure your DNS server is the first in the workstation's DNS list.

Does this help?

Sep 27, 2007 | Microsoft Windows Server Standard 2003 for...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...