Question about Hitachi 60V500 60" Rear Projection HDTV-Ready Television

Open Question

No picture or sound. power light turns on then within few moments starts to blink???

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 101 Answers

SOURCE: tv turns on for a few seconds then the picture and

I have a 50v715 that did the same thing and it ended up being the bulb(lamp) Try replacing the bulb, make sure you replace it with a original hitachi lamp.

Posted on Nov 08, 2009

Ad
  • 101 Answers

SOURCE: my 50v500 turns on then few seconds turns off then

Probably the bulb(lamp) is going bad. I have a 50v715 did the same thing,replaced the lamp and its working great. Hope this is helpful.

Posted on Nov 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mitsubishi ws65713 picture goes out


I know these sets well, you lose brightness but still have sound?

If the green power light comes on for a few seconds and then goes out the set has a self check for error codes:

UNPLUG TV AND THEN PLUG BACK IN---TURN ON---GREEN POWER LIGHT COMES ON FOR A MOMENT AND GOES OFF.

PRESS AND HOLD "device"(input) and "menu" buttons on front of tv for at least 5 seconds and then release both together.


Watch for power light to blink in a sequence:

1 blink-then 2 blinks-------no error

2 blink-then 1 blink-------X-ray protection

2 blink-then 2 blink-------SHORT PROTECTION*******

2 blink-then 3 blink---------deflection circuit problem

2 blink-then 4 blink---------vertical circuit problem


******2, then 2 is most common---usually means one of the fuses that protect the Convergence IC or IC's is blown---set will detect no voltage to convergence IC and shut down.


SET WILL REPEAT BLINK ERROR CODE UP TO 5 TIMES AND THEN TO GET IT TO REPEAT MORE YOU HAVE TO UNPLUG SET AND TRY TO TURN ON AGAIN.


IF IT IS 2 AND THEN 2---USUALLY
CONVERGENCE CIRCUIT PROBLEM

let me know what you find--hope that you find 2 blinks, a pause and two blinks--this is the most common and easiest to fix.

Nov 02, 2012 | Mitsubishi Televison & Video

1 Answer

I have a WS-65907 tv, it wont turn on


Mitsubishi self check: MOST OF THESE SETS HAVE A SELF DIAGNOSTIC:

UNPLUG TV AND THEN PLUG BACK IN---TURN ON---GREEN POWER LIGHT COMES ON FOR A MOMENT AND GOES OFF.

PRESS AND HOLD "device"(input) and "menu" buttons on front of tv for at least 5 seconds and then release both together.


Watch for power light to blink in a sequence:

1 blink-then 2 blinks-------no error

2 blink-then 1 blink-------X-ray protection

2 blink-then 2 blink-------SHORT PROTECTION*******

2 blink-then 3 blink---------deflection circuit problem

2 blink-then 4 blink---------vertical circuit problem


******2, then 2 is most common---usually means one of the fuses that protect the Convergence IC or IC's is blown---set will detect no voltage to convergence IC and shut down.


SET WILL REPEAT BLINK ERROR CODE UP TO 5 TIMES AND THEN TO GET IT TO REPEAT MORE YOU HAVE TO UNPLUG SET AND TRY TO TURN ON AGAIN.


IF IT IS 2 AND THEN 2---USUALLY
CONVERGENCE CIRCUIT PROBLEM

let me know what you find--hope that you find 2 blinks, a pause and two blinks--this is the most common and easiest to fix.

Oct 30, 2012 | Mitsubishi WS-65907 65" Rear Projection...

1 Answer

My 65 inch projection TV turns off within a few seconds when I turn it on. Why? No pictures or sound.


If power light does come on and a few seconds later it goes off---do the self check that the WS65909 MITSUBISHI should have:

On the front of the set press and hold both the MENU and INPUT(OR DEVICE) BOTH FOR 5 SECONDS AND THEN RELEASE BOTH BUTTONS.

Power light should blink a two digit code--error code---for example: 2 blinks, a pause and 2 blinks.

Let me know what code you get----it will repeat it several times---and I will tell you what it means.


SD TECH

Nov 03, 2009 | Mitsubishi WS-65909 65" Rear Projection...

1 Answer

TV doesn't turn on


If it does not give a picture at all not even for a moment, i would suspect a bad power supply, the circuit has quite a few components and either one of those could be giving you trouble.

Sep 24, 2009 | Sony KDS-55A3000 55" HDTV

1 Answer

Turn on the TV and only Timer light is on , no sound & picture


after holding down the menu and device the led will blink a two digit error code such as 3 blinks pause then 4 blinks then repeat that sequence a couple of times. Need that blink code to help let you know whats going on. The 34 code means lamp abnormality which translates to the power Pwb capacitors have most likely failed.

Jan 23, 2009 | Mitsubishi WD-52525 52" Rear Projection...

4 Answers

Model kdp65ws550


High voltage protection. Either transistor Q8014 04 Q 8013 is shorted along with R8051 on the D board or IC 8005 is defective on the D board. Let me know if you need more assistance

Apr 22, 2008 | Sony Grand WEGA KDP-65WS550 65" Rear...

2 Answers

Sony LCD television will not power on.


I get 5 blinking red lights for about a minute or so before it powers back down. The Sony TV has a specific light that i presume is supposed to light up when the bulb is out. I'm unsure if this is what it is.
no picture, no sound. tries to boot with green light blinking a few times. then goes to red blinking light, six in all, then waits a few moments, then another 6 blinking red light.
Bulb was already replaced several months ago but we do have the TV on for long periods of time.

Jan 15, 2008 | Sony Grand WEGA KF50WE610 50" Rear...

Not finding what you are looking for?
Hitachi 60V500 60" Rear Projection HDTV-Ready Television Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2318 Answers

The Knight
The Knight

Level 3 Expert

74496 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...