Question about Symphonic Televison & Video

Open Question

I have an older model ST27S3. What is the code?

I have an older model ST27S3. What is the code? The A/V inputs are in the front ane back of the set but no channel will show the DVD and I don't have the remote. What can I do?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 520 Answers

SOURCE: Input

Use a RF Modulator. This will allow you to connect the dvd to the antenna jack of the tv.

Posted on Sep 04, 2008

ShadeTek
  • 79 Answers

SOURCE: Can't change our Panasonic TV channel to watch DVD input

Buy a 21 way scart.This will have an 'AV' enable connection built in. After fitting, turn on the TV, then turn on the DVD player. It will automatically enable the DVD through the scart socket.

Posted on Nov 10, 2008

  • 13 Answers

SOURCE: AV input selection without a remote

Depending on the model of the tv, you could scroll ch dn past ch 2 and you should cycle through your inputs. if that doesn't work try holding down the two vol buttons on the tv. that could access the menu for the tv

Posted on Jan 24, 2009

  • 2 Answers

SOURCE: RCA model F27252GY TV has no Video button or AUX channel for DVD

try putting the tv on channel 00, that is where this tv apparently shows the input from at least one on the video channels.

Nancy

Posted on Mar 01, 2009

  • 2 Answers

SOURCE: AV input selection without a remote

I had the same problem. I hooked up the DVD player and then got into the set up. I used the add/erase feature to go through all of the channels. At channel 91, I saw the logo for the dvd player. I added that channel and now the dvd player works.

Posted on Mar 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the input without a remote for an old Sylvania TV model #SST4191? There is no input option when I push menu on the front of the TV


From the instructions I have seen there is a button on its remote called "game" which triggers the input command my only thought is on older tv's selecting 0 got there but this "game" may exist via the front button if so select that and see what happens next, pressing "game" after is to exit.
I would have thought a remote may exist as I have seen another make TV with similar looks around, try ebay or Amazon or some £2-3 cheepo multi remote you may get lucky, though you would have to try all its codes which on most at that price is about 200 or so out of may thousands, find an older version it will have more period aged codes.
Sorry not much help ..............

Mar 04, 2015 | Sylvania Televison & Video

1 Answer

How to change input on tv without a remote


Which TV do you have? Some will have an Input or Source button on the front panel. A few will have an option to change the source from the menu. Both of these options require the front panel lock to be inactive.

A few older TVs allowed you to find the A/V input by pressing Channel Down on the front panel buttons until you passed channel 2 (or Channel Up until you nearly reached Channel 2). This option wouldn't work if the A/V inputs had been deleted when someone minimized going through unused channels.

If the Source or Input button was only available on the remote, you will need a universal remote that includes this feature. These cost a bit more than the lowest end remotes. Then you will have to try all of the codes to find the one that makes the Source button work with your TV. (Several codes may work for On/Off but not the change input.) The Universal remotes that can be programmed from a computer (USB connection) will be the easiest to set up. Remotes.com may have a replacement original or substitute remote for your TV that should work for all of the TV functions.

I hope this helps. Please add a comment with the TV make and model for specific options for your particular TV.

Cindy Wells
(low end TVs usually only had the Source/Input button on the remote.)

May 12, 2012 | Sony Televison & Video

1 Answer

My mitsubishi medallion hd 1080 doesn't show content from component cable


Some of the older Mitsubishi with HD 1080 have only one component input for HD---it is marked on rear as DTV----also a model number may allow me to give another suggestion--Some of these sets (ws, wt, vs models) will on occasion lock out or disable the input/s.

Depending on model number most also have 3 hidden menus---one is the option menu----it allows with the Mitsubishi remote via a 4 digit number (by model number) to enter there and do a hard reset of the set----sets every setting back to factory original---seen it "cure" all kinds of odd problems from missing rear inputs, no sound, odd video issues---you name it.

Get me the model number and I will see if can find the code for yours--you can also try hooking first direct a 1080 blue ray or Dvd if you want to see if the input is active or not first.

Apr 14, 2012 | Televison & Video

1 Answer

Mitsubishi big screen HD 1080 series model WS-55809. it switched off one day. and when i turn it back on it switches right back off. red light in front. what part do i need to fix it/


That model does not have a red light---Green.

If set powers up for a few seconds (green power light) and goes out do the self check the model indicated has:

On front of set (not with remote) press and hold both the input and menu buttons for at least 5 seconds and release both.

Green power light will blink a two digit error code like 2 blinks, 2 blinks a pause and repeat it several times.

Let me know what error code you find (if you have unplugged the set that will clear all errors and you have to plug it in and try to turn set on again---when it fails do the self check)

Mar 31, 2012 | Mitsubishi WS-55809 55" Rear Projection...

2 Answers

Hello my name is yogesh my leptop model is studio1555 and the problem is how to remove hdd password on my leptop because i set password but this password are not work and after 3 times you rong password...


you'll need to contact Dell support for this one. they will be able to help you request a password that you can use to reset/clear the hard drive password. After it is reset, you may then set a new hard drive password if preferred. Be sure that you have the ownership information of the system in order to get help from Dell about this issue.

Aug 31, 2010 | Dell Studio 1737 Laptop

1 Answer

Inputs do not work after power outage


The set has three ways to reset---the tiny button on the front, A second is called a soft reset, and the third requires going into the tech Menu with a code via the remote.

Try the soft reset first and let me know if it helps.

With the set on hit: Menu, 1, 2, 3, and enter.


SD TECH

May 03, 2010 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

How do i get my tv on to the av channels without a remote


The short answer is you can't. Most sets now require the remote control, which has a "source" or "input" button that you need to press. To make matters worse, a universal remote often (usually, in fact) won't have the right codes to switch inputs. There are vendors selling original replacement remotes, but they can be pretty costly.

The longer answer is that on a few TVs you might find a source selection through the on-screen menus. If your set has front panel menu control. Some do, but often the functions are very limited. On a few models of RCA sets you could switch to AV inputs using special channel numbers (00, 98 or 99) but these were older models made when cable systems had fewer channels.

Without knowing your brand and model I can't tell you more. But it's almost certain you'll need a remote. Hopefully you can find a universal remote that will work for you.

Mar 26, 2010 | Televison & Video

1 Answer

Cannot get dial tone to make a call ane cannot receive an incomming call.o


Double check your wire from the wall to your base set.

Is it possible you have something 'off hook' and the phone company has turned the dial tone off? Look in the front of your telephone book for the procedure to check the service to the "De-Mark"

I hope this helps you

a

Sep 27, 2009 | Panasonic KX-TG1033S Cordless Phone

1 Answer

Locked out of older Mitsubishi VS4503R. Need owners manual/help!


If you are locked out of the inputs, you need a original Mits remote. Push QV and the 9 button simultaneously to unlock temporarily. Some models its the SQV button and 9. This will let you get in to change the code. You can also get a simmilar issues with the active AV network turned on, it will lock it to a set input (ie input 1). Try going into the menu and turning the av network off.

Dec 03, 2008 | Mitsubishi WS-65809 65" Rear Projection...

2 Answers

Gamecube cheat codes


i can you have to have a gameshark or actionmax cd program go to one of there websites or ebay should be around $20 and then you can follow their instructions aned you should be able to put whatever codes you want in

Feb 19, 2008 | Nintendo GameCube Console

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Symphonic Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Symphonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...