Question about Akai LCT3201TD 32 in. LCD Television
Use the auto mode first make sure you have the device on first then in the instructions it tells you how to put the remote in the auto mode. follow the directions usually putting the mode in the search mode then pressing the power button slowly untill the set turns off. you will need to look at the remote manual to be sure or it is also on the website for your provider then you press the enter key. if you go through all the codes and the button blinks twice or goes off than your tv set cannot be used by the remote you have dont go to fast as you may need to do it all over again if you go too fast as you will skip over the right code. a lot of folks ask for codes but unless you have a programmable remote or a l4earning remote you cannot enter codes into a remote as all the codes are already flashed into the ROM chip inside the remote.Good Luck!!!!! techman
Posted on May 07, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Apr 28, 2010 | Akai LCT2715 27 in. LCD Television
Jun 10, 2009 | Akai LCT3201TD 32 in. LCD Television
Jun 04, 2009 | Tivo DirectTV Remote Remote Control
Apr 22, 2009 | Sanyo DP42848 LCD TV
Dec 29, 2008 | Universal Remote Control DIRECTV Universal...
Nov 02, 2008 | Akai LCT2715 27 in. LCD Television
Dec 09, 2007 | Tivo DirectTV Remote Remote Control
Dec 07, 2007 | Directv RC23 Remote Control
184 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: