Question about Canon BubbleJet i560 InkJet Printer

1 Answer

Service error 5C00 or 5100

Getting a service error 5C00 or 5100 when trying to print. Can't find error listed in documentation.

Posted by on

  • 4 more comments 
  • Anonymous Sep 03, 2008

    buoi

  • Anonymous Sep 07, 2008

    Bij het afdrukken van een foto hapert de printer, geeft een klikje, stopt het printen en krijg ik in rode tekst de foutmelding 5100.
    Hoe kan ik dit probleem oplossen



  • Anonymous Mar 21, 2009

    When i try to print the Service error 5c00 comes and locks me out on printiing

  • billloub Apr 03, 2009

    everytime I try to print I get an 5C00 error message which also states to turn off computer and cancel print queue. this doesn't do a thing.. What does this error code actually mean and how do I get my printer functioning?

  • mplouffe Apr 15, 2009

    Error 5C00 when I try to print. There is nothing blocking the tray.

  • Anonymous Mar 23, 2014

    grinding noise

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

5100 Make sure nothing is blocking the cartridge movement, if not requires service.

Posted on Apr 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have HP 4600dn and getting service error 49.2FCC. What does that mean


I'm not certain of this, but its possible that there are embedded postscript fonts in your document that are causing the printer to choke.
What I would do is to load up your file in Publsiher, and then save it as a Word.doc file. and then try to print.
I just looked at the service manual and this is the recommendation to try first.

Apr 20, 2016 | HP LaserJet Printers & Copiers

Tip

PRINT SPOOLER PROBLEM ON XP/VISTA


If you are receiving SPOOL.SVC or PRINT SPOOLER ERRORS when trying to uninstall/reinstall your printer, or when trying to print a document or access the printer properties, please follow the steps below.

The following are examples of some of the messages you may be receiving:

Spool.svc is not running. Make the service active and try again.
Printer Properties cannot be displayed. The print spooler service is not running.
Printer cannot be removed. The print spooler service is not running.
Windows cannot print due to a problem with the current printer setup.
(When clicking Add Printer) Operation could not be completed.

NOTE: Only these types of errors warrant the troubleshooting steps clearly defined below.

Resolution:

SPOOL.SVC is an operating system function which carries files through the operating system for printing. It must be STARTED (active) to be able to print or access any printer's functions. This file usually starts automatically with Windows, however operating system issues may cause it to become stopped. You cannot uninstall or reinstall a driver while this service is stopped.

Please try the following to start the service again:

1) Click on START, right click MY COMPUTER, left click MANAGE.
2) On the left column, double-left click SERVICES AND APPLICATIONS, then click SERVICES.
3) Locate and highlight the PRINT SPOOLER on the list of Services.
4) Click START THE SERVICE.

If errors occur and the service cannot be started, there is another issue within the operating system itself.







on May 21, 2008 | Epson ACULASER CX11NF All-In-One Printer

1 Answer

Printer spooler


Hi,
If you are receiving SPOOL.SVC or PRINT SPOOLER ERRORS when trying to uninstall/reinstall your printer, or when trying to print a document or access the printer properties, please follow the steps below.

The following are examples of some of the messages you may be receiving:

Spool.svc is not running. Make the service active and try again.
Printer Properties cannot be displayed. The print spooler service is not running.
Printer cannot be removed. The print spooler service is not running.
Windows cannot print due to a problem with the current printer setup.
(When clicking Add Printer) Operation could not be completed.

NOTE: Only these types of errors warrant the troubleshooting steps clearly defined below.

Resolution:

SPOOL.SVC is an operating system function which carries files through the operating system for printing. It must be STARTED (active) to be able to print or access any printer's functions. This file usually starts automatically with Windows, however operating system issues may cause it to become stopped. You cannot uninstall or reinstall a driver while this service is stopped.

Please try the following to start the service again:

1) Click on START, right click MY COMPUTER, left click MANAGE.
2) On the left column, double-left click SERVICES AND APPLICATIONS, then click SERVICES.
3) Locate and highlight the PRINT SPOOLER on the list of Services.
4) Click START THE SERVICE.

If errors occur and the service cannot be started, there is another issue within the operating system itself.

Mar 13, 2011 | Canon Printers & Copiers

1 Answer

Print spooler not running. Dont know whether its connected but ive just had live help from microsoft for sound problem


Hi!
If you are receiving SPOOL.SVC or PRINT SPOOLER ERRORS when trying to uninstall/reinstall your printer, or when trying to print a document or access the printer properties, please follow the steps below.

The following are examples of some of the messages you may be receiving:

Spool.svc is not running. Make the service active and try again.
Printer Properties cannot be displayed. The print spooler service is not running.
Printer cannot be removed. The print spooler service is not running.
Windows cannot print due to a problem with the current printer setup.
(When clicking Add Printer) Operation could not be completed.

NOTE: Only these types of errors warrant the troubleshooting steps clearly defined below.

Resolution:

SPOOL.SVC is an operating system function which carries files through the operating system for printing. It must be STARTED (active) to be able to print or access any printer's functions. This file usually starts automatically with Windows, however operating system issues may cause it to become stopped. You cannot uninstall or reinstall a driver while this service is stopped.

Please try the following to start the service again:

1) Click on START, right click MY COMPUTER, left click MANAGE.
2) On the left column, double-left click SERVICES AND APPLICATIONS, then click SERVICES.
3) Locate and highlight the PRINT SPOOLER on the list of Services.
4) Click START THE SERVICE.

If errors occur and the service cannot be started, there is another issue within the operating system itself.

Feb 16, 2011 | Lexmark X1190 All-In-One InkJet Printer

1 Answer

I turned power off printer in order to stop it printing a long document that I only needed a couple of pages of adn it's now showing error 306 306 A communication error has occurred. Make sure that the...


Hi there
You can try see if this may do it.

Go to Start / Run and type in "services.msc" without quotation marks, then press Enter or click OK.

In the window that opens (Services) look for "Print Spooler" on the right

Right-click "Print Spooler" and select "Properties".

Click on the "Recovery" tab and change all 3 drop-down boxes to "Restart The Service".

Make sure the 2 text boxes underneath say "1" in them.

Click Ok until you are back at the Services window, close it and you're good to go.

Go back into the properties of the "Print Spooler" tab and be sure to click Start to restart the Print Spooler service and it will restart the service immediately.

The Print spooler depends on the Remote Procedure Call (RPC) service. Is this service disabled? Go to services.msc look for RPC. Check state: Automatic

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Mar 09, 2010 | Canon MP610 Photo All-In-One Printer

1 Answer

It reads Printer Error - see your documentation


this means your printer waste pads are full and the printer needs to be reset for it to work again or it can just be reset

Sep 25, 2009 | Epson Stylus Photo RX500 Printer

1 Answer

Print Sooler not installed


HI

If you are receiving SPOOL.SVC or PRINT SPOOLER ERRORS when trying to uninstall/reinstall your printer, or when trying to print a document or access the printer properties, please follow the steps below.

The following are examples of some of the messages you may be receiving:

Spool.svc is not running. Make the service active and try again.
Printer Properties cannot be displayed. The print spooler service is not running.
Printer cannot be removed. The print spooler service is not running.
Windows cannot print due to a problem with the current printer setup.
(When clicking Add Printer) Operation could not be completed.

NOTE: Only these types of errors warrant the troubleshooting steps clearly defined below.

Resolution:

SPOOL.SVC is an operating system function which carries files through the operating system for printing. It must be STARTED (active) to be able to print or access any printer's functions. This file usually starts automatically with Windows, however operating system issues may cause it to become stopped. You cannot uninstall or reinstall a driver while this service is stopped.

Please try the following to start the service again:

1) Click on START, right click MY COMPUTER, left click MANAGE.
2) On the left column, double-left click SERVICES AND APPLICATIONS, then click SERVICES.
3) Locate and highlight the PRINT SPOOLER on the list of Services.
4) Click START THE SERVICE.

If errors occur and the service cannot be started, there is another issue within the operating system itself.

Nov 08, 2008 | Dell Inkjet 720 Printer

1 Answer

Spooler servis dont work


If you are receiving SPOOL.SVC or PRINT SPOOLER ERRORS when trying to uninstall/reinstall your printer, or when trying to print a document or access the printer properties, please follow the steps below.

The following are examples of some of the messages you may be receiving:

Spool.svc is not running. Make the service active and try again.
Printer Properties cannot be displayed. The print spooler service is not running.
Printer cannot be removed. The print spooler service is not running.
Windows cannot print due to a problem with the current printer setup.
(When clicking Add Printer) Operation could not be completed.

NOTE: Only these types of errors warrant the troubleshooting steps clearly defined below.

Resolution:

SPOOL.SVC is an operating system function which carries files through the operating system for printing. It must be STARTED (active) to be able to print or access any printer's functions. This file usually starts automatically with Windows, however operating system issues may cause it to become stopped. You cannot uninstall or reinstall a driver while this service is stopped.

Please try the following to start the service again:

1) Click on START, right click MY COMPUTER, left click MANAGE.
2) On the left column, double-left click SERVICES AND APPLICATIONS, then click SERVICES.
3) Locate and highlight the PRINT SPOOLER on the list of Services.
4) Click START THE SERVICE.

If errors occur and the service cannot be started, there is another issue within the operating system itself.

Aug 25, 2008 | HP Printers & Copiers

1 Answer

SPOOLER SERVICE IS NOT RUNNING


If you are receiving SPOOL.SVC or PRINT SPOOLER ERRORS when trying to uninstall/reinstall your printer, or when trying to print a document or access the printer properties, please follow the steps below.

The following are examples of some of the messages you may be receiving:

Spool.svc is not running. Make the service active and try again.
Printer Properties cannot be displayed. The print spooler service is not running.
Printer cannot be removed. The print spooler service is not running.
Windows cannot print due to a problem with the current printer setup.
(When clicking Add Printer) Operation could not be completed.

NOTE: Only these types of errors warrant the troubleshooting steps clearly defined below.

Resolution:

SPOOL.SVC is an operating system function which carries files through the operating system for printing. It must be STARTED (active) to be able to print or access any printer's functions. This file usually starts automatically with Windows, however operating system issues may cause it to become stopped. You cannot uninstall or reinstall a driver while this service is stopped.

Please try the following to start the service again:

1) Click on START, right click MY COMPUTER, left click MANAGE.
2) On the left column, double-left click SERVICES AND APPLICATIONS, then click SERVICES.
3) Locate and highlight the PRINT SPOOLER on the list of Services.
4) Click START THE SERVICE.

If errors occur and the service cannot be started, there is another issue within the operating system itself.

Pls Rate as Fixya if this helps, Thanks!!

Jun 26, 2008 | Dell A940 All-In-One InkJet Printer

Not finding what you are looking for?
Canon BubbleJet i560 InkJet Printer Logo

1,164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96627 Answers

old marine
old marine

Level 3 Expert

1476 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...