Timer Can anyone explain how to use the timer of the GE split system?

YOUR SPLIT SYSTEM FUILTY

Usually if you look close, several parts have burn or blackened area at point of solder.
This indicates that multiple parts are affected... replace timer.
Otherwise, there is no schematic for these types of digital timers that shows the value of parts.
Following resources have images of similar problem, and similar timers.
http://waterheatertimer.org/Timer-caught-fire.html#resistor
http://waterheatertimer.org/Boxtype.html
http://waterheatertimer.org/How-to-wire-GM40-timer.html

Gene

Water Heater Timers Save Money

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Here are the instruction on how to use the timer.
http://waterheatertimer.org/pdf/GE-15325-InWall-Timer.pdf

alanoshima,

You can find the manual, current and up-to-date fromt eh maufacture by going tot he following link:

http://www.jascoproducts.com/support/timer-quick-start-guide.asp

Scroll down to find your manual in .pdf format.

Open and use accordingly.

If you have any other questions JASCO has a support line that can walk you through the use of the timer. The number is:

Tech Support:
Phone: 800.654.8483
Option 4 if prompted

Happy New Year!

Cheers,
GeekyGuru

Manual for GE 15119 has photos that explain timer operation:
http://waterheatertimer.org/pdf/GE15119-Manual.pdf

The photos along with words in manual explain better than I can repeat here.

You can also pay a fixya expert to answer your question over the phone for a fee.
The expert will walk you through the steps by repeating steps shown in manual.

Manual for GE 15119 has photos that explain timer operation:
http://waterheatertimer.org/pdf/GE15119-Manual.pdf

The photos along with words in manual explain better than I can repeat here.

If this is not your timer, then add a comment with description of buttons and timer features, and I can probably identify the timer.

You can also pay a fixya expert to answer your question over the phone for a fee.
The expert will walk you through the steps shown in manual.

Many people ask the same question. Here a GE timer with segments pulled up.

New timers come with segments pushed down, and then the manual says push the segments down, so it's confusing.
Manuals should add a diagram or a few words to explain.

Up-vote if this helps.

I just bought one today and installed it. It does the same thing - flashes the lights off and on. After some research on the net, it seems that the problem is that an old house is wired with two pole wiring and the new fixtures, (timers included) are 3 pole. The conclusion I have found is that it will not work in a 2 pole wired house. There supposedlly are timers available for 2 pole wiring. I hope this helps. If you find out anything different, please let me know.

The door is interlocked to stop the drum from turning and.or causing an injury to anyone opening it.. The timer is the control system that switches the drier and heater on to dry clothes but it does that by energizing a relay /contactor.. You probably have a bad relay or your timer is bad and not de-energizing that relay to stop the cycle... If you provide specific model number of your GE dryer.. that might help in diagnosing your problem...

i have the answer! press menu,then scroll down to number 5 it will say time nxt to it,press ok,then press number 1,set timer to your desire!