Error 614 - Paxar Monarch 9855 Thermal Printer

The manual is here

QUANTUM 614 - Pride Mobility

https://www.pridemobility.com > pdf > us_jazzy
PDF
Your Quantum 614 is a sophisticated power chair. Like any motorized vehicle, it requires routine maintenance checks. You can perform some of these checks, but ...
44 pages

614 definition is Portion of the field is off the tag. A way to explain this is that you've created a field that supports up to 25 characters, and the width of that label is only 2 inches. If you typically print using 22 or less characters in that field, you never see the problem, but when you use 23 or more characters, you get a 614. Meaning that characters 23 and higher don't fit in the designated space.

You could move your field closer to the edge of the label to see if you can get additional room for the additional characters. You could choose to use a smaller font, or reduce the width of the current one being used so as to fit more in the same space, or you could consider using a feature in the printer to ignore imaging errors.

Note that using that feature can give you the net result of not all of the needed data fitting on the label that you designed. That could cause pricing errors, incorrect or unwanted descriptions, various other codes, etc.

Reply back if you think that you'd like to use the feature of ignoring the imaging errors and I can see if your printer supports the feature, as well as provide the step by step you need to enable and disable the feature for versions that support the function.

here is a list of tv codes hope this helps

Admiral 500, 614 , 902, 615, 610, 501

Advent 911, 932, 933

Aiko 900

Akai 601, 903, 922

AOC 601, 617, 103

Apex 000, 618, 604

Audiovox 100, 901, 900, 101

Belcor 617

Bell&Howell 620, 611

Bradford 901

Brockwood 617

Broksonic 902, 614

Candle 601, 619

Celebrity 605

Changhong 618

Citizen 903, 601, 619, 900

Clairtone 103

Concerto 619

Contec 901, 103

Craig 901

Crosley 303, 301

Crown 901

Curtis Mathes 400, 301, 620, 100, 500,

903, 621, 606, 619, 611,

603, 102, 402, 401, 405

CXC 901

Daewoo 100, 617, 900, 101

Daytron 617

Dumont 700, 617

Durabrand 902, 901, 201, 614, 615, 914, 918

Dynex 614

Electroband 605, 103

Emerson 620, 902, 614, 901, 200, 201

607, 617, 615, 602, 103, 101

Envision 601

ESA 901, 201, 601, 903

Fisher 620, 801

Fujitsu 615, 300

Funai 901, 615, 201

Futuretec 901

GE 400, 202, 100, 200, 607

608, 802, 402, 401, 405

Gibralter 700, 601, 617

GoldStar 601, 607, 617, 619

Grundy 901, 615

Haier 914, 918

Hallmark 607

Harvard 901

Hitachi 606, 619, 611, 005, 916

ILO 921, 925, 609

Infinity 301

Inteq 700

Insignia 614, 303, 201,301, 909, 919, 920, 934

JBL 301, 000, 604, 618

JCB 605

JC Penny 400, 609, 202, 903, 601, 607,

608, 617, 800, 402, 405

JVC 701

KEC 901

Kenwood 601, 617

KLH 618

KTV 901, 601, 103

Konka 904, 001, 304, 002, 003

LG 619, 910, 700

Logik 611

Luxman 619

LXI 400, 301, 620, 609, 607, 402

Magnavox 301,302, 303, 601, 615, 617, 803,

905, 906, 907, 908, 909

Majestic 611

Marantz 301, 601

Matsushita 004

Megatron 607, 606

MEI 103

Memorex 620, 004, 614, 104, 607, 615, 611

MGA 104, 601, 607, 617, 500

Midland 400, 700, 202, 402

Minutz 608

Mitsubishi 500, 104, 607, 617, 601

Motorola 500, 802

MTC 903, 601, 617, 619, 103

Multitech 901

NAD 609, 607, 603

NEC 601, 617, 619

Nikko 601, 607, 900

Noshi 800

NTC 900

Olevia 923

Onwa 901

Optimus 620, 004, 603

Optonica 500, 610

Orion 902, 614, 615

Panasonic 004, 202, 802, 610

Philco 301, 614, 601, 606, 617

Philips 301,302, 303, 601, 615, 617, 803,

905, 906, 907, 908, 909

Pilot 601, 617

Pioneer 603, 600

Polaroid 400, 910, 913, 915, 917, 920

Portland 617, 900

Prism 202

Proscan 400, 402

Proton 607, 102

Pulsar 700, 617

Quasar 004, 202, 610, 802

RadioShack 400, 620, 610, 901, 621

607, 617, 619, 402

Realistic 620, 610, 901, 601, 607, 617,619

RCA 400, 617, 800, 612, 600

402, 403, 401, 404, 405, 623

Rhapsody 103

Roomconx 614, 615, 902, 924

Runco 700, 601, 616

Sampo 601

Samsung 903, 601, 607, 617, 619, 930

Sansui 614, 902, 615

Sanyo 620, 801, 931

Scotch 607

Scott 902, 901, 607, 617, 615

Sears 400, 301, 620, 609, 607

615, 622, 801, 201, 402

Sharp 500, 610, 501, 929

Sharp (LCD) 912, 929

Shogun 617

Signature 611

Simpson 803

Sony 605

Soundesign 901, 607, 615

Squareview 201

SSS 901, 617

Starlite 901

Supreme 605

Sylvania 301, 601, 201, 901

Symphonic 901, 201

Tandy 500

Tatung 802

Technics 004, 202

Techwood 202, 619

Teknika 301, 901, 104, 605, 617

615, 619, 611, 900

TMK 607, 619, 602

Toshiba 620, 609, 903, 613

Trutech 101

Victor 701

Vidtech 607, 617

Vizio 927

Wards 301, 610, 601, 607, 608

617, 615, 619, 611

Westinghouse 926, 928

White Westinghouse 614, 101, 605

Yamaha 601, 617

Zenith 700, 614, 611, 900, 619

hi, Please take a look at the following link:

http://www.pridemobility.com/resourcecenter/Downloads/Basic_Troubleshooting_Guides/basic_troubleshooting_guides.asp



Regards

Your version has a Dynamic Controls model controller and joystick.
Unplug the charger and engage the motor/brake lever so the chair is no longer in free-wheel mode (con't push by hand)
Turn the chair off, wait 5 seconds, turn the chair back.
If chair still does not run and your wrench is flashing you have a problem. Count the wrench flashes - the flash count indicates the error detected. 3, 4, 5, and 6 flashes indicate and error with the motors.
3=Left motor fault
4=Right motor fault
5=Left brake fault (may not be engaged)
6=Right brake fault (may not be engaged)
Any other fault code usually means the electronics or wiring is bad and not worth fixing.

You'll need to access the administrator web page for your router, and then set a security key (password) for wireless users.

For step-by-step instructions for setting up security on the D-Link DI-614 router, see:

http://technicallyeasy.net/2010/10/how-to-secure-d-link-di-614-wireless-router/

1. this error is not recognizable.
But here is the D-link site for updating your firmware for the DI-614
this may resolve your issue.
http://www.dlink.com/products/?pid=DI-614%2b
2. You also may want to check the status of you router by logging into it and checking the "status" page (192.168.0.1)
User : admin
No password unless specified
This will tell you a lot as to what the router is doing and not doing.

A 614 status code is telling you that a portion of the field is off the tag. Either the data that you're sending to the printer needs to be adjusted, or the software program/driver that you are using needs to move the data field within the scope of the label size itself.

Longoftheshort... If you tell your printer to print the word HELLO, but you start the H to the far right of the label, the ELLO is technically off the label. This is what 614 is trying to tell you. The rest of the label might print out okay, but not that one field. Adjust your label, or don't print as many characters in that field, and you could find the 614 going away.

Though the actual issues is a little deeper than what I have explained, it should give you a basic understanding of the issue.

The netgear web site has instructions on how to convert a 614 to an access point. You can use 3 of the 4 ports as a switch and the 4th port is you physical link back to the network. The WAN port is not used.

http://kb.netgear.com/app/answers/detail/a_id/965

gets you the instructions.

Carl

Hi, Are you getting any numeric messages in this error?