Question about Apex Digital Digitrex DSC-3000 Digital Camera

1 Answer

RE: software installation problem

Operating system? Windows Vista. When camera is plugged into USB it gives option to locate and install driver softeware but when option to install is chosen it asks to insert disk that came with camera then says can not find driver software. Also camera doesn't appear in computer menu. I am using internal memory. Have attempted to install a memory card but pictures won't transfer. You seem so knowledgeable so i hope you can help. These pictures mean alot!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 141 Answers

Right now I am going to go backwards----

Memory Card, when you put the card in the camera, you need to format it. With most cameras, you go to the Menu, scroll through the menu and find memory card, format, click on it and the camera will format the card for the camera.

Once formatted, you set the camera to use the memory card, also in the camera.

Now all pictures will go to the memory card.

If you have a computer with a memory card reader, you put the card in the slot on the computer and the computer will recognize it. Go to Start---Computer---double click on the memory card---your pictures should show up. Usually with Vista you will get a box that pops up after inserting the card that asks you want you want to do. Such as view files, transfer pics to a certain folder etc.

***Make sure you are using a memory card that is compatible with the camera. This does not seem to be a newer model so an SDHC card probably will not be compatible. An SD card would be. If we cannot find a drive don't fret, using a memory card you do not need the driver for the camera.

Do you have the disk? I have gone to ApexDigital website, and cannot find any drivers for the camera. They show the camera, but no downloads. I will keep hunting for you but in the meantime:

On the camera there should be a serial number, look on the bottom of the camera, if you can find one, give me all the numbers you find. I will go from there.

Don't give up yet!

Posted on Mar 27, 2008

  • melyndazeek1 Jan 05, 2011

    if u have this cd please send me a copy i broke mine and i needto get pics off the camera

    melyndazee197@yahoo.com

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I installed windows 7, nw my USB camera driver is ...


camera criver software is for windows vista 32 bit only. We are still developing the sofware for Windows 7 operating system. You can check the software availabilit by clicking the link here.

May 21, 2010 | Lenovo 3000 Y410 Laptop

1 Answer

How do i install a high speed usb port in my ibm tp 600e and also is this computer wi-fi compatible


Plug an external High-speed USB device to a free USB port your computer.

Allow the "Add New Hardware" wizard to search your system for drivers. Windows Vista would typically ask for a location for the drivers while Windows XP would give you the option of saving your preference.

However, if the device was shipped or sold with an installation CD/DVD, slot it in the CD/DVD drive and choose to search locations you specify for the drivers.

Ask your vendor for the best location to find the drivers on the CD/DVD. To be on the safer side, install the software on the CD/DVD. In most cases, the drivers get copied to the system and automatically attracts a recognition by the 'Add New Hardware' wizard.

When the Hardware installs successfully, launch the software (if any) to configure your device the best way it suits you.

Hope this helps!

Apr 03, 2010 | IBM ThinkPad 600E 2645 Notebook

3 Answers

VU600EN.exe canon rebel XT driver install problem


The drivers are located on the Canon website:

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=314&modelid=11154

Use the drop down box labeled "Select OS" and select Windows Vista (x64).

Mar 11, 2009 | Canon Rebel XT / EOS 350D Digital Camera

1 Answer

Display driver problem in windows 7


Go to the Intel Homepage :

Click "Graphics" then select your software in the right-hand pane.

Choose your operating system as "Windows Vista (32 / 64)".

Save the file to your Desktop or to a USB stick.

Install the software onto Windows 7 OS and run the compatibility

program.

Nate P.


Jan 26, 2009 | Microsoft Windows Vista Ultimate Edition

1 Answer

About webcam


First ensure the webcam is Vista compatible.

Also ensure you have right driver software for yor webcam.

Install software for the webcam before connecting the cam to usb.

If you still get in trouble , do the following (Vista only):

Locate camera driver software on disk, or on downloaded files.
Click right mouse button on installer file.
A menu will drop down, chose "run as administrator".
Say yes whenever asked for authorizations to system changes.

If you need drivers for your cam, post a new request on Fixya providing make and model. To post a request use link here:Solve Your Problems

Oct 14, 2008 | Microsoft Windows Vista Home Premium with...

4 Answers

Facing ploblem while using TATA indicom USB modem in Vista Home Basic


Hi I'm Sathiya. I use Windows Vista Home Basic platform. I recently bought a TATA Indicom Plug to Surf connection. It had issues with drivers. I went to Tata indicom site and downloaded the latest driver for Vista. After installing the drivers, my connection is working fine. Make sure that you choose the right version.

Jun 27, 2008 | Microsoft Windows Vista Ultimate Edition

2 Answers

Drivers


if your operating system is windows xp or even vista go to logitech.com select the usa site then go to support....Drivers....find your camera download them unplug the web cam install software then plug the camera in when prompted to

May 28, 2008 | Logitech Webcam

2 Answers

Connection between camera and computer


What operating system are you using? Is you camera connected via USB? Have you tried using another USB port? Did you make sure to install the software before plugging in your camera?

Generally if you are running Windows 98, you will need to reboot after installing the software to even have a chance of the camera being recognized correctly.

If you are running Windows 2000, XP or Vista, the camera should be recognized and a driver installed or searched for from the CD software you installed before plugging in the camera.

Sometimes if you plug in the camera first without installing the software, the PC finds a new device with no driver. You can see this by going to Control Panel -> System -> Hardware -> Device Manager and you should see and exclamation on a device in the list. You need to remove this item and reboot your PC.

Now install the software first and when the install is done, then plug in your camera. Generally this works out pretty well.

Apr 29, 2008 | Canon PowerShot A80 Digital Camera

1 Answer

Vista driver


usually if you buy a camera, gadgets etc will bundled with a cd which is driver actually. if your operating system is vista, then you must make sure that the camera will work in that operating system. You can read it on the manual or etc or in the box. install the software in the cd first before you plug the camera into your pc. the software must be included with the appropriate driver.

Feb 16, 2008 | Microsoft Windows Vista Ultimate Edition

2 Answers

Not Recognized in Windows Vista OS


point driver installation manually to c:\windows\system32 manually pointing driver installation to system32 will helps u to reconize and also check for possible usb driver and usb port

Sep 27, 2007 | Sanyo VPC- C6 Digital Camera

Not finding what you are looking for?
Apex Digital Digitrex DSC-3000 Digital Camera Logo

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apex Digital Cameras Experts

Steve

Level 3 Expert

3287 Answers

kakima

Level 3 Expert

102366 Answers

Tony Parsons
Tony Parsons

Level 3 Expert

2747 Answers

Are you an Apex Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...