Question about Barebone Systems

1 Answer

Hp officejet 6210 All in one if there is more than one psge to print, the first page prints great in black. The following pages are all printed in red. Can any one help?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I just print one page at a time. Its tedious, but what is the alternative?

Posted on Mar 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I no longer have my manual, how do I change the ink cartridges for the HP Officejet 6300 all-in-one?


To replace the print cartridges
1. Make sure the HP All-in-One is on.
Caution If the HP All-in-One is off when you open the print cartridge door
to access the print cartridges, the HP All-in-One will not release the
cartridges for changing. You might damage the HP All-in-One if the print
cartridges are not docked safely on the right side when you try to remove
them.
2. Open the print cartridge door.
The print carriage moves to the far right side of the HP All-in-One.
3. Wait until the print carriage is idle and silent, and then lightly press down on a
print cartridge to release it.
If you are replacing the tri-color print cartridge, remove the print cartridge from the
slot on the left.
If you are replacing the black or photo print cartridge, remove the print cartridge
from the slot on the right.
4. Pull the print cartridge toward you out of its slot.
5. If you are removing the black print cartridge in order to install the photo print
cartridge, store the black print cartridge in the print cartridge protector or an
airtight plastic container.
If you are removing the print cartridge because it is low or out of ink, recycle the
print cartridge. The HP Inkjet Supplies Recycling Program is available in many
countries/regions, and lets you recycle used print cartridges free of charge. For
more information, go to the following website:
www.hp.com/hpinfo/globalcitizenship/environment/recycle/inkjet.html
6. Remove the new print cartridge from its packaging and, being careful to touch
only the black plastic, gently remove the plastic tape by using the pink pull tab.
7. Slide the new print cartridge forward into the empty slot. Then gently push on the
upper part of the print cartridge forward until it clicks into the socket.
If you are installing the tri-color print cartridge, slide it into the left slot.
If you are installing a black or photo print cartridge, slide it into the right slot.
8. Close the print cartridge door
9. If you installed a new print cartridge, the print cartridge alignment process begins.
10. Make sure you have plain paper loaded in the input tray, and then press OK.
11. The HP All-in-One aligns the print cartridges. Recycle or discard the print
cartridge alignment sheet.
12. Press OK.

Jul 17, 2011 | Barebone Systems

1 Answer

Have hp officejet 6300 which prints well, but everything is shifted about an inch to the right, meaning there is no right hand margin, and a large left hand one.


hi the problem is goint to be with the software not the printer if the print quality is fine and its just the page allignment thats out then you will need to reinstall the software that came with the printer this will reset everything back to factory settings and this should then solve your problem.
Also have you looked at the print preview to see if it is ligned up properly on the page let me know ok then i can assist you further ok

Feb 04, 2008 | Barebone Systems

1 Answer

Black ink not working


Your black ink printer head might be blocked by dried materials. Try to open your printers maintenance software and execute head cleaning procedures. Try to print a test page after every head cleaning or you may run print head diagnostics. If the black ink still doesn't print, try to use another black ink cartridge and compare with initial results.

Apr 01, 2008 | Barebone Systems

1 Answer

When printing black, the first page comes out in clear black, however subsequent pages are printed in red. In doing a second document the same thing occurs.


Be sure to update your printer drivers with the newest (correct) manufacturer's drivers.

Also, make sure when you print a document you are printing in greyscale. Otherwise, you're wasting your color cartridge. Speaking of which I would try another set of cartridges, and aligning them using the software that came with your printer. Your color cartridge could be malfunctioning.

Mar 25, 2008 | Barebone Systems

1 Answer

Colour prints not satisfactory


D_foofat,
This link will take you to instructions on cleaning your Cartridge Print Head: http://h10061.www1.hp.com/ccsearch/search?method=viewDocument&redirUrl=http%3A%2F%2Fh10025.www1.hp.com%2Fewfrf%2Fwc%2Fdocument%3Fdocname%3Dc00285228%26cc%3Dus%26lc%3Den%26dlc%3Den%26product%3D402150%26dlc%3Den%26lang%3Den&docId=document%28c00285228%29&uqry=&cqry=clean+printhead&ctry=us&dlc=en&lang=en&qry=clean+print+head
I hope it helps, and Good luck.

Mar 16, 2008 | Barebone Systems

1 Answer

I HAVE A HP OFFICEJET


when you go to print click on the Preferences button ,in there it should give you the option to fit to page ,or option to print at a %. you may have to hunt around for it depending on what o/s you are using

hope this helps
Terry

Mar 14, 2008 | Barebone Systems

2 Answers

After replacing my color cartridge my printer won't print in color. but it will copy color pages perfectly.


When you go to print from IE check the prefrences and see if it is set to Monochrome. It should be under the Advanced tab.

Mar 12, 2008 | Barebone Systems

1 Answer

Double sided printing


There should be a setting in the 2-sided properties for binding orientation.

For a MAC, do this:

On the File menu, click Print.
Open the Two-Sided Printing panel.
Select the option to print on both sides.
Select the binding orientation by clicking the appropriate icon.
Change any other settings, and then click Print.

Feb 26, 2008 | Barebone Systems

1 Answer

HP Deskjet 840c - Printing Emails


I did see you reinstalled your software) but please continue
It is important that you have that icon by the clock. Power off the printer by pressing the power button on the printer.
Please un-install your printer software through Add/Remove Programs within the control panel. Please restart the Pc after un-install is complete. Create a folder on your hard drive and name it, "HP DeskJet 840C". Go to this link listed below & download the printer driver software listed. When you save to disk you can choose where you want to save. Pick the folder you created. Save inside this folder. The HP driver (Will most likely be updated software). I promise, you will have a icon down by your clock when finished.
http://h10025.www1.hp.com/ewfrf/wc/product?product=59868&lc=en&cc=us&dlc=en&submit.y=4&submit.x=7&lang=en&cc=us
Follow the instruction in your manual for setup & installation.
If you using Outlook Express & you want to print or send through your printer the page should be set as 8.5x11". Orientation should be set to Portrait, unless you set this for A4.
Lastly, please turn off your anti-virus software during install & re-install. Just in case you come back to this thread!
please vote...

Jan 30, 2008 | Barebone Systems

Not finding what you are looking for?
Barebone Systems Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Barebone Systems Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

john smith

Level 2 Expert

366 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Barebone System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...