Question about Hitachi 53UDX10B 53" Rear Projection Television

1 Answer

Color is not alligned

The color on the tv looks 3-d

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 175 Answers

It will be ure convergance chips they are about $30 each and u need 2 also dont try and realign settings as it will stuff settings and when u put new chips in it is a very long process to realign, open the back and you will see the ICs they have about 40pins and screwed to an alloy heatsink, if its pretty old its not worth fixing for the price of these units these days second hand on ebay

Posted on May 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Colors on tv look like 3d, ihave tried to adjust the crosses so they will allign but some do not go all the way to where they are completely lined up.


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

Problem #1) Convergence

Yours may have one or more of the following symptoms...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Apr 18, 2010 | Sony Televison & Video

1 Answer

My hitachi tv's picture is distorted red and green like a 3-d pic


Projection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When its out of alignment the video will look 3D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the TV menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.

Convergence problems are very common on all Projection TV sets including Sony, Samsung, JVC, Philip Magnavox, Panasonic, Akai, Pioneer, Hitachi, Zenith, and others. You can get a convergenece repair kit from the link below.

Common Symptoms include....
  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
  • TV shuts off after powering on - TV may also make a chirping noise.
Here are some photos of convergence problems.

49abec3.jpg
f0add3d.jpg


Here is a quick test....

Using your original remote go-to the settings menu then goto the convergence section.

Try to adjust the red and then the blue convergence.

You should be able to move RED and BLUE in all directions - up, down, left, and right.

If you can't move them in all directions or cant move them far enough your convergence chips are bad and should be replaced. This is a common problem.

Note: If you TV has as flash focus or magic focus button only try pressing the button. If it fails to fix the convergence your need to fix it. See below for a solution

93a1209.pngCONVERGENCE SOLUTION

You will need to replace the convergence chips and possibly some convergence resistors and pico fuses.
This is a a fairly easy DIY job if you know what you are doing. If you have never done this before we would advise calling a shop or if you want to do it yourself get a complete kit with instructions and support from www.TvRepairKits.com

Feb 08, 2010 | Hitachi 57F710 TV

1 Answer

The screen of my tv looks warped, the colors arent


Ur convergence it dead.Must know how to solders?Buy a convergence kit.Replaced what in that kit.Tries these websites Tv repair World.com,Tvrepairkits.com.
The tv shop will cost u $300 parts and labors.

Dec 28, 2009 | Sony KP-53HS30 53" Rear Projection...

1 Answer

Colors are not alligned on my rca 52 inch projection tv


Go to meu then setup if you do not see convergence on menu then you have a bad Fuse FL231 it is next to FBt flyback transfomer on botton board to the left hand side there will be 3 in a roll small brown rectrangler looking caps but they are fuses , it will be the one in the middle Call mats for part 1-800-628-1118

Sep 25, 2009 | RCA R52WM24 52" HDTV Projection Television

1 Answer

Colors are not alligned


This is a very common failure on Projection TV sets.
Screen looks 3D
Colors don't line up
One or more colors can't be adjusted when using the convergence menu.
Screen is bowed or warped.
You can see some example photos and find a solution here...
http://www.fixya.com/support/r2861627-updated_convergence_problems_amp

Sep 12, 2009 | Philips Magnavox 50ML8105D 50" HDTV DLP TV

1 Answer

I am getting a double image on my 48 inch television how can i get rid of it? it is showing colors green and red on double image


Assuming that your TV is a rear-projection TV, then it sounds like the separate red, green & blue tubes aren't set correctly.

Each tube needs to be alligned exactly to produce the image on the screen. If any of the 3 are mis-alligned then the effect you describe is caused.

Somewhere in the menu settings, will be an option to set the Convergence. This option will allow you to set the allignment of all three tubes.

Older sets do not have this option, and need to be adjusted via controls on the main PCB.

Apr 22, 2009 | Televison & Video

1 Answer

My tv the bolbs have moved out of place


I am assuming you mean bulbs. Typically the bulbs do not just move out of place on there own. Did the tv take a sharp impact or did some one hit the tv hard enough to move it. The bulbs are held in place with plastic sleeves that are typically held in place with 6 to 10 screws depending on the model. Your local repair shop may be able to assist you in renting the allignment tools for your bulbs. Typically the convergence chip goes and it gives the TV the appearance of the bulbs slipping and makes the tv look like the colors have seperated. One of the colors seems to have shifted to one side and doesn't line up with the rest of the picture. So check with your local dealer or write to the company and see ig your convergence chip is available and if you can rent the allignment tool.

Oct 23, 2008 | Televison & Video

1 Answer

Projection red is above other colors


Look in your menu for something called "horizontal static convergence" or just "convergence". Adjusting this will align all three tubes electronically. If physical adjustment is needed, then you have to do this manually inside the Tv. keever

Dec 09, 2007 | Mitsubishi WS-65908 TV

Not finding what you are looking for?
Hitachi 53UDX10B 53" Rear Projection Television Logo

Related Topics:

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2318 Answers

The Knight
The Knight

Level 3 Expert

74118 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...