Question about Canon PIXMA iP1800 InkJet Photo Printer

2 Answers

Canon MP150 I have just refilled my two cartridges and the low ink warning stays on.I have trawled a lot of websites for correct reset procedure ,but the MP150 seems unique in its button layout and I have'nt found it anywhere.Any help would be appreciated. I have just refilled my two cartridges and the low ink warning stays on.could you give me the right instruction on how to reset the printer PIXMA iP1800? as soon as possible..thanks

Posted by on

  • Capn Mo May 05, 2008

    I have installed refilled cartridges from Cartridge World on my iP1800 series Canon printer and the low ink warning stays on. I have removed and re-installed the cartridges to no avail. I know they are full and it is not preventing me from printing. Should I just ignore it or is there a reset feature I don't know about?

  • Capn Mo May 11, 2010

    It would be helpful if one would know where to find the "reset" button mentioned in the solution.



    Capn Mo

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The reset button is the yellow blinking light under the on/off button.

Posted on May 05, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Canon Master
  • 5,568 Answers

Try holding the Reset button for 5 seconds or more; this may have to be repeated several times.

Posted on May 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Black ink cartridge is full, when printing no black showing


Reset waste ink counter

To reset waste ink counter at printers canon pixma MP150, MP160, MP170, MP180, MP450 and MP460 there any 2 choice, that is :

Start with printer on then run this software
Click Reset Main (main) to reset waste ink counter and then click Reset Platen button (additional)

Or

When you insert a refilled ink cartridge into your Pixma MP500 printer you should get a warning about the refilled cartridge. You should also be prompted, asking if you wish to disable ink level detecting. Agree to do so, and you won't get the warnings again because the ink levels won't be monitored by the printer.

Feb 22, 2011 | Canon PIXMA MP150 All-In-One InkJet...

2 Answers

Can one reset the Lexmark P6250 printer refilled cartridge?


No, you can usually tell your printer to "ignore ink levels" when it gives the ink low warning on your computer screen. As long as they print just keep printing until they run out.

Dec 28, 2009 | Lexmark P6250 All-In-One InkJet Photo...

1 Answer

I refilled the ink with a refill kit


You can't reset the ink level on all Canon Pixma printers.You need to turn off the function on printer to show the ink level.On your printer this happen with push consistently buttons for black copy (for turn of level on black cartridge) and color copy (for turn of level in color cartridge). The printer
shows empty cartridges but it will printing.

Oct 07, 2009 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

MP160 ink level won't reset


The only _bypass_ is to ignore the warnings/lamps, and keep using your printer until it runs out of ink.

The only _solution_ is to purchase "original" cartridges, i.e., do not use "refilled" cartridges.

Sep 10, 2009 | Canon PIXMA MP150 All-In-One InkJet...

3 Answers

Canon pixma mp 145 E4 problem


Dear Sir,

Error Code E4 = No ink.
Generally printer doesnt recognise refilled ink.
Try the to reset the ink catridges
by mp tool software,mptool reset the printers canon pixma series like MP150, MP160, MP170, MP180, MP450 and MP460.And there also facility to write and read EEPROM in the printer. Other excess this software is detect automatically installing printers in the computer.
Download Mp tool

i think it solves your problem,But the actual procedure and best solution is replace the ink catridges,according to canon new genuine canon ink catridges save your printer life also.
if you find any difficulty leave a feedback,we will glad to assist you


good luck

Sep 08, 2009 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

My canon mp 150 has a warning ink refill cartridge


After so many prints the printer gives you this warning because it is possible that the waste ink pads (that collect any spilt ink in the bottom of the printer) are full. You have two options. You can either reset the waste ink counter and the printer will run but might get some ink leakage if it has had a lot of use or replace the pad and reset the counter.

A waste ink kit for this printer is Canon part number QY5-0149-000. A quick search on the will get you the part for about £5. Too fit it you will need to take the printer apart but that is easy with a service manual from here: http://www.tradebit.com/filedetail.php/4589462-canon-pixma-mp150-printer-service-manual The manual will also tell you how to reset the waste counter.

Hope that helps.

Nov 07, 2008 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Ihave a Canon Pixma MP150. Not long since had ink refill, working perfect yesterday and now saying ink cartridges cannot be recognised why is it saying this now. Please can someone help with this problem....


i just refilled my ink cartridges black and color ones, but my warning sign still reads that my cartridges are low. How do I tell it, it has new ink cartridges or refills? I printed a test page and an alignment page, thinking it would somehow get the picture, but not yet.

May 05, 2008 | Canon Printers & Copiers

9 Answers

Canon MP150


How to reset the Canon MP150 after a refill (Step 10 concerns refill; instructions below the steps):
Method1 (Safe Factory Method):
1) Disconnect the printer’s power outlet
2) Press and hold the power button while connecting the power outlet back.
3) While still holding down the power button, press the reset button twice.(red circle with a triangle)
4) Release the power button
The printer takes about 10 seconds to show the number 0.
5) Press + to change the value from 0 to 1.
6) When this value is 1, press colour button; this will light up two leds.
One is for plain paper and the other for photo paper. At this point is feed the printer with paper.
7) Press the power button twice and the printer will print a some stuff (if this page doesn't print by itself, press the "color" button once and the test page will print). Don’t worry much about the printed material. I got some stripped lines and some numbers. I believe that my colour cartridge is clogged which is why I got the green strips.
When you print this sheet the value in the display returns to zero.
8 ) Open the printer cover cover (not the scanner cover) and remove the cartridges. With the printer still open, disconnect the power outlet.
9) Close the lid and turn on the printer.
10) Refill cartridges and place them back in their nice little abode in the printer.

Aug 07, 2006 | Canon PIXMA MP150 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA  iP1800 InkJet Photo Printer Logo

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96518 Answers

old marine
old marine

Level 3 Expert

1464 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...