Question about PC Desktops

1 Answer

I have a brother printer, Model Number HL-2700cn, serial no u60767M4S142278. I just bought a lap top and wireless broadband router. In order to connect the printer to my wireless lap top I need the IP address of the printer. Can you help?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 57 Answers

The Automatic Private IP Addressing (APIPA) protocol
automatically assigns an IP address from the range:
169.254.1.0 to 169.254.254.255. If the APIPA protocol is
disabled, the default IP address of a Brother print server is
192.0.0.192. To change it, use the printer control panel (if
applicable), the BRAdmin Professional, Web BRAdmin software
or let your DHCP server allocate an IP address to the printer.
2 Refer to chapter 10 of this User’s Guide to learn how to
configure the IP address on your printer.
3 The default password for Brother print servers is access.
4 Windows® 2000/XP users can print using TCP/IP using the
standard Network Printing software and IPP protocol software
built into any Windows® 2000/XP installation.if you need manual just email me at repagenserv@saipan.com or romeo_palencia@hotmail.com

Posted on Mar 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My printer will not print any documents from my HP pavilion Lap top. I will receive and send faxes. It will make copies. We bought a new Lap top for my daughter and can ot get online with our NET GEAR...


Go to control panel- printers and check that your printer is selected as the default printer. If it isn`tn then right click on the icon and set it as the default printer. I am assuming that your laptop is recognizing the printer of course and your usb cable is inserted properly.

May 05, 2009 | PC Desktops

1 Answer

Trying to hook up a Linksys Wireless -G 2.4ghz Broadband Router. Want to link my dsl and my xbox and then later down the road a lap top. Dont know where to begin. Do I take the phone line thats inthe wall...


first you connect the wire from the wall into the wan port in the back of your dsl modem. next you connect the outsource wire from your dsl modem into the wan port on your router. next put another rj45 wire into the number one port in the back of your router and the other to your computer. put another wire into number 2 and then to your xbox. everything need to be unplugged while you are hooking it up. once done power cycle...meaning plug up the dsl and wait for the lights to stay lit. then the router. the start your computer. if you want to go wireless just get a usb wireless network adaptor and there you are


Oct 19, 2008 | PC Desktops

1 Answer

Just bought 3 lap tops for children, can't find keycode to get them connected to Belkin router model no:F5D72304,serial number:20063204558


Its not the serial number we need its the wep address, If I remember correctly it is 192.168.1.1 or 192.168.1.1 Clear your url bar(http://) and type it the numbers. If these addy's are correct you will get to the security center in your route, make what ever changes neccessary.

anaanymous

Oct 12, 2008 | Belkin PC Desktops

1 Answer

Try to hook up to wireless lap top


I have the Belkins "G" Wireless Router I cannot get it connected to my Computer System. I also have the Installation CD but need to know how many Ethernet Cables should I have to start the stallation? What color are the cables? I think that I am missing an Ethernet Cables. The Ethernet Cable Connections on the Router are color coated. The Serial Number is: BELL7D4811F - Belkin "G"Wireless Router: Model No. F5D7230-4

Sep 12, 2008 | PC Desktops

1 Answer

Have connocted to broadband on computer i am now trying to go wireless on lap top using modem and router but not able to connect to internet on laptop


have u made sure that the wireless switch is on and have you configured the router in the advanced options

Aug 21, 2008 | PC Desktops

1 Answer

Need help getting wireless netgear to work with lap top. Lap top was reconfigured and don't have old password.


If you don't have the wireless password for your wireless connection. The thing to do is log into the Router's webpage via the Router's IP address. From there you can go to the wireless section and in most routers this section shows the wireless password.

If you have trouble getting on to the Router's webpage. Just comment back on this and I can probably step you through it.

Aug 16, 2008 | PC Desktops

1 Answer

I have bought a belkin wireless g router. my pc is virgin broadband i need to connect an aspire lap top. where do i plug in to make the router work


Hello,

If you have your pc connected directly to your Virgin Broadband modem through the ETH/LAN port on your pc then disconnect it from that port on your PC.

Then connect the same cable to your Belkin Routers Internet/WAN port. Then take the extra cable that came with the Belkin router and connect it to 1 of the 4 lan ports on the Belkin router. Then connect the other end to your PC in the LAN port.

After that, restart your PC and everything should be fine.

Thanks

Jul 23, 2008 | Belkin PC Desktops

1 Answer

I am trying to conect a Linksys router to my wireless laptop in order for me to use it anywhere in the house. The last step is to conect the router to computer and it shows a tower. Since I have a lap...


Can you provide the Wireless Router model number located on the bottom of the device. It should be on a white label.

I would think that during the entire setup process your computer would be connected to your router, or that you were at least wirelessly connected to the router to configure.

Down in the notification area (area by the clock in the lower right corner of your computer) do you see an icon with a monitor and a couple curved lines? You should be able to right-click on it and select "View Wireless Networks". This should open a window where it will display the name of your wireless router (provided that it's powered on). You can highlight the name (we call it an SSID) and select CONNECT at the lower right corner of the window.

If you have security enabled you will need to input the security key you created and select ok.

That should connect you to the wireless network. Have you already configured the router to connect to the internet through your Internet Service providers equipment?

Jul 13, 2008 | PC Desktops

1 Answer

I'm trying to find out on how to connect my other computer wireless to my 2wire. My other(desk top) has a linksys card in it. It was already setup for Linksys Broadband Router, wireless-G 2.4GHz 54Mbps. I...


Hello Art G.

The easiest way to get connected to your access point is by using the CD that came with the AP. If you don't have it, you have to get connected to the access point in order to get the WEP KEY.

If do you have the model of the Access point (2wire) i can help you with that.

Jul 04, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

319 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...