How to install Canon ir c3220 drum and toner?

www.usa.canon.com/cusa/support

Canon Error Code E000020 01b0


Although the yellow drum is indicated, in the link above, please note it may not be the yellow drum if instead it is the:"laser shutter or the plastic actuator on the right side of the front door."

When you were replacing the drum did you tuch the drum surface?Best would be that you take some toner on piece of cloth, and polish the drum, while turning it in good direction, that the cleaning blade can clean it.After you must let it copy about 50 copies.

You can try to replace the whole drum unit cexv14, or clean the laser unit.

Also could it be that the toner unit, or toner cleaning blade are not properly distibutes the toner accross the developing/toner cylinder

http://software.canon-europe.com/products/0010476.asp

try to download the manual from the above link and check there.
Howver you can also check it on the lid. instructions are given. This should be very easy as we need to pull out the tray and replace the cartridge. signs and signals are given on the printer itself.

If you open the front cover and release the leaver of the drum unit.Remove the drum unit.On the drum itself is a plastic plug,remove the plastic plug and remove the waste toner in to a bin.The waste toner is stored behind the drum and must be removed reguarly.

this error reoccors when one or more drums are damage or reach their end it is best to replace all the drums since they tend to go all at the same time almost

http://www.service.canon.com.au/manuals/ufrv130.pdf Give this a go mate.

you have to update the firmware

Wow,
I am not sure why or how I just bumped into this question 8 months later....and why no one has answered your question prior. I hope to God some one has helped you or you bumped into it on your own. If not, press additional functions,system settings, network settings, and the rest is obvious.

Sound like a driver issue, reinstall and check that it is correct one.