Question about KitchenAid 24 in. KUDP01IL - Multiple Color Built-In Dishwasher

2 Answers

I have this model dishwasher and last year I spent close to $300.00 having this control panel replaced and as soon as the warranty went p it stopped working again, but there is a green light that blinks next to right side where it says clean. It seems like it is blinking in sequence.. I cannot afford to spend this kind of money to have this fixed again. The co. that has the contract with kitchenaid is horrible and do not double check their work. The only thing tey care about is the bck.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 949 Answers

Sorry to hear about the trouble with service. I have put together a sheet to show why the clean light blinks and how to reset the control so you can use it. Let me know if you have questions I would be happy to assist. Here is the link to the instructions.

http://www.fixya.com/support/r4628906-flashing_or_blinking_green_clean_light_7

Posted on May 06, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hello,
Please help.
I follow recommendations for cleaning: sewer pump, cleaning arms, screens of the dishwasher.
However, still machine is not working. water is not going through arms: lower, middle or top. Also, I get water into dishwater when it starts, and when I open i hear noise for water dripping into hot elements,but no water is running throughout.

PLEASE HELP

Posted on Aug 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Recently got 2nd hand Amana side by side model XRSS687BB. Compressor stops when closing fridge door. Freezer working as long as fridge door remains open. Fridge damper closed and won't open though it


I have went through something like this before, the serviceman told me it was in fact a compressor issue. Do you hear some kind of buzzing noise? Is it extremely hot? Then it's a compressor issue. They are pretty expensive to have replaced, would recommend to purchase a different brand. I had the same problems as Frigidaire. I had the compressor replaced twice during a time period of 2 years. It went out a third time and it was out of warranty and they told me that the compressor didn't receive any kind of warranty gain for itself and the company shortened the warranty of the compressor because of the issues they had with them. Since they were aftermarket ones, didn't apply to the original warranty. If you continue to have issues with this brand, please research the brand integrity online before you make another bad investment. I paid more for the new brand but it lasted longer than 9 months. The next fridge that I bought was older and used but lasted 5 years, so I stuck to that brand and it paid dividends stop far.

Dec 18, 2014 | Amana Refrigerators

2 Answers

Control Panel Problem on a Maytag DW MDBTT79AWW


I had this same problem, ordered the replacement control panel from whirlpool. The new panel worked for two weeks, then stopped working again. OUCH!
The replacement part costs $264.34 and has no warranty if you do it yourself.
I think I am now going shopping for something other than a Whirlpool or Maytag machine. They have terrible customer service.

Feb 12, 2010 | Maytag Dishwashers

4 Answers

Won't turn off, cycles unpredictably, touchpad not responding?


You can reset this faulty control by unplugging the entire unit for five minutes. If this dose not correct this fault, i recommend replacing the damaged control board or timer. It has failed in this case.

Sep 16, 2009 | Jenn-Air 24 in. JDB1100AWS Built-in...

2 Answers

Same thing happened today


with the door open when your dishwasher was working normally Did the lights light up on the keypad? I am wondering because if the answer is the keypad only worked with the door closed .....you possibly have a bad door switch.


or it could be a blown fuse inside the dishwasher. are any lights on at all?

Jun 12, 2009 | Jenn-Air 24 in. JDB1100AWS Built-in...

1 Answer

I cannot be sure of the make/model - there is no power


It sounds like you have a bad controller which is an expensive part if it is over five years old. However, there is a recall on some Bosch dishwashers which involves replacing the control. If you call Bosch at 1-800-944-2904 they can tell you if your model is involved in the recall.

Apr 17, 2009 | Bosch 24 in. SHU66C02 / SHU66C06 Built-in...

9 Answers

Kenmore Elite 17483 Dishwasher Caught Fire!


Had the exact same problem (Control panel burning up, sparking, and smoking during wash cycle) last night with our Kenmore Elite DW model 665.16293400 purchased Nov. 2004. I have reported it to the CPSC and www.kitchenaidfire.com and will be contacting Sears first thing tomorrow. It is outrageous that this problem is apparently so widespread with nothing being done about it! I have no doubt my kitchen would have been in flames if I had not been sitting right here to shut off power to the D/W.

Feb 04, 2009 | Kenmore 24 in. 17483 Built-in Dishwasher

1 Answer

Dishwasher works only in Rinse and no lights on the Control Panel


I HAVE SEEN THIS BEFORE ON SEVERAL DIFFERENT MAYTAG MODELS AND EACH TIME, IT HAS BEEN THE ACTUAL TOUCH PANEL WHERE YOU MAKE YOU SELECTIONS. I HAVE PROBABLY SEEN A DOZEN OF THESE IN THE LAST COUPLE OF YEARS. HOPE THAT HELPS.

Jan 29, 2009 | Maytag MDB9600A Jetclean II Built-in...

1 Answer

Smelled like burnt board


Just so you know. Bosch has a 5 year warranty on any printed circuit board (excluding labor) so you pay only for labor charges. They have a 2 year warranty (again excluding labor) on the entire dishwasher. I am leaving a copy of my owners manuals warranty information I hope this helps.

Extended Limited Warranty: Bosch also provides these additional
limited warranties:
• 2 Year Limited Warranty: Bosch will repair or replace
any component that proves to be defective in materials or
workmanship (excludes labor charges).
• 5 Year Limited Warranty on Electronics: Bosch will repair or
replace any Bosch microprocessor or printed circuit board if it
proves to be defective in materials or workmanship (excludes
labor charges).
• 5 Year Limited Warranty on Dish Racks: Bosch will replace the
upper or lower dish rack (excluding rack components), if the rack
proves defective in materials or workmanship (excludes labor
charges).
• Lifetime Warranty against Stainless Steel Rust Through:
Bosch will replace your dishwasher with the same model or
a current model that is substantially equivalent or better in
functionality, if the inner liner should rust through (excludes
labor charges). Bosch will replace the stainless steel door if the
door should rust through (excludes labor charges).
The foregoing timeline begins to run upon the date of purchase, and
shall not be stalled, tolled, extended, or suspended, for any reason
whatsoever.
Repair/Replace as Your Exclusive Remedy: During this warranty

Jan 14, 2008 | Bosch 24 in. SHU43 Built-in Dishwasher

1 Answer

Maytag MDB9100AWW Dishwasher


We have this same model. Right under the 5 yr warranty mark, the control panel started going "funny". Some of the buttons stopped working, then more. We could finally get it working only in one mode. I was certain it was the control board, which I replaced under warranty just in time.

This lasted another year, until moisture began appearing under the number window and the left side button set stopped working. Now the right side is gone, except for the delay-start button.

I believe moisture is getting into the control board and frying it, either slowly or quickly. If you are seeing similar problems where buttons seem to stop working, it is PROBABLY the control board. It is a relatively easy home repair if you know your way around a screw driver.

Oct 13, 2007 | Maytag MDB7100AWB Dishwasher

1 Answer

Wash cycle starts up temporarily during initial fill


Joe, this is normal. Your model has a soil sensor and the updated board has a soil purge. So it will fill, purge the sensor and resume. Catriver..post back.

Oct 26, 2006 | KitchenAid 24 in. KUDP02CR Built-in...

Not finding what you are looking for?
KitchenAid 24 in. KUDP01IL - Multiple Color Built-In Dishwasher Logo

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Dishwashers Experts

Mike

Level 3 Expert

4340 Answers

Cindy Wells

Level 3 Expert

5127 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a KitchenAid Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...