Question about Televison & Video

2 Answers

Last night our Time Warner cable went down. The internet service returned but our 2004 27 inch Zenith TV will not turn on i.e. no picture or sound. The switch seems to activate as a click is heard and the red light by the on off button glows for a second before another click seems to shut it down. The TV was on and connected to the cable box when the TV turned off last night. The TV won't work alone without the cable box attached. Our other TVs without a cable box are working.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 818 Answers

Go for some support here where you can find your manual
http://www.zenithservice.com/gcsc/b2c/hpi/main?tc=owm.command.OwmCmd
Sergio

Posted on Mar 27, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,037 Answers

I think that the unit is going into protective shutdown because it has detected an internal problem. I would suggest that you invest in a detailed repair estimate that will cost about $100-$150 depending upon your location. It might cost even less, especially if you take it in. You could also contact Zenith and see what they might say about this problem first before taking it in.

Main support number 1-877-993-6484

Posted on Mar 27, 2008

  • Benjamin Patri
    Benjamin Patri Mar 27, 2008

    actually, I was thinking it was a bigger screen, any estimate should cost probably half of what I said

  • Benjamin Patri
    Benjamin Patri Mar 27, 2008

    Basically, Major problems with this model, return if you can or fix if you wish, I am sorry that this has happened to you. I hope you have a good day and please don't forget to rate this solution

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The picture freezes and the sound is lost. Until the picture returns and the sound returns,this happens every couple of seconds.


If you actually have the Zenith model TV (B25A24Z), the trouble is not in your set. This model has only an analog tuner, and what it sounds like you are describing is digital pixellation. This is what happens with a digital-to-analog converter box when it gets a weak signal, with rain fade or heavy snow on a satellite dish antenna, or when a digital cable system has some signal problems. The converter equipment locks the last complete frame (or breaks up into blocks and freezes) and the sound is muted.

You'll need to look for the cause of your trouble in whatever is feeding the TV. If you have a digital converter box for off-the-air broadcasts, make sure you have a good antenna and all the connections are tight. If you have satellite TV service or digital cable service, you might need to contact your service provider for help in troubleshooting and fixing the trouble.

Dec 19, 2010 | Zenith B25A24Z 25" TV

1 Answer

Not recognized by cable modem


Turn everything off for 2 minutes, cable modem, router and pc.

Turn on modem and wait 2 minutes for the modem to sync to TW.
Turn on router after 2 mins and wait until the router syncs with the modem.
Turn on PC
It sounds like your router lost its connection to the cable modem, which happens from time to time. TW will not help with your router. I worked for a cable co and the router and modem losing sync was the at least 70% of the calls. FYI cable doesn't use DSL,just the phone co.

May 19, 2009 | Zoom X6 Adsl Modem/router Rohs...

1 Answer

42 inch LG Plasma TV - Lost picture


If you paid by cheque or credit card, that is your proof of purchase.

Mar 09, 2017 | LG 50PG6000 50 in. HD-Ready Plasma TV

7 Answers

No sound on my Sanyo LCD 32" flat screen tv


I had this same problem this morning. Luckily, when I reset the whole thing and did the channel search again the sound returned. I have no idea why it fixed it but it did. Hope this helps you.

Feb 12, 2009 | Sanyo DP32746 32 in. LCD Television

1 Answer

Sound


I do not have a Zenith B25A02Z TV. What I do have is a 1988 Zenith Color TV SE2517P. I called a local tv repairman and discussed the problem over the phone. He can take a look at it if we bring it in (service call to the home cost $100 just to show up). He said it was worth fixing since he thought it was only the sound. We have a great picture. He charges $20 to look at it but we have to leave it. He lives 20 minutes away one way. We think it is worth the trip if we can get it loaded into our minivan. We live in western NY where the weather can get pretty ugly many days. I will post the solution later when I know. FYI

Dec 30, 2008 | Zenith B25A02Z TV

1 Answer

All of a sudden ...no sound


The Time Warner support walked me through getting my SAP turned off on the CABLE BOX.

Nov 06, 2008 | Hitachi 53SBX01B 53" Rear Projection...

1 Answer

Zenith P42W46X 42 inch EDTV


common problems with these, usually customers here a loud pop. then the screen goes blank. I would try...
Some of these have a 4 pin test on the control board that you can jump with solder to get test pattern. If you get it to do that then these boards maybe good and would replace the control board. if nothing happens, then
the upper & lower drive also the Ysus and Zsus boards all at the same time.
last could be a defective panel.
hope this helps. p/n are on all the boards.

Jul 22, 2008 | Zenith P42W46X 42 in. Plasma EDTV

1 Answer

42 inch LG Plasma TV - Lost picture


ysus pcb that supplies voltage to the panel is faulty

Dec 14, 2007 | LG 42PX4DV 42 in. EDTV-Ready Plasma...

1 Answer

42 inch LG Plasma TV - Lost picture


sounds like it may be a software upgrade

Oct 16, 2007 | LG 50PX4DR 50 in. Plasma TV

1 Answer

No picture


the porblem of your tv might be somwhere in the video chroma.... the first thing to do is to check for an open capacitor 16V 1000mf path ways to CRT board connection to the main board... if your not inclined with this job contact for a service technician.....gud luck!!

Mar 18, 2007 | Zenith A50M91W 50" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73073 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

71162 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...