Philips hts 6102 region codes - Philips Televison & Video

It's possible that this DVD is not from the same region as the DVD player.
For instance, a DVD from India (region 5) will not play in a DVD player from the US (region 1).
You may want to check into that and post a reply here.

Hi there, please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay_5fc4

Try this:
Switch player on

Press eject on the remote to open tray

On the remote, press 9,9,9,9 then 0

Region:0 should appear on the screen

Switch player off, then on again

Should now be multi-region

Credit goes to rimcius from www.videohelp.com

Open Tray
Place different zone DVD into player tray
Press 99990
Press Play

Enjoy

With your set on and without disc in the tray:

1. Press PLAY from your remote control
2. Press the following button sequence: 1590 2379 390
3. Press PLAY again

This will release the region verification in your home theater (region free). However, some DVDs (multiregion in particular) will not play, since they require region detection from the player unit.

I've done this to my 3090 and been using it like this for 3 years.

Turn it on. Do the following (with the remote).

1. Press "Open/Close"
2. Press 9 9 9 9 0
3. Press "Open/Close"

It should say "Region: 0" in the upper left corner.

I bought today a Philips HTS 8140 region 4 and i use this solution

1. Abrir a bandeja do aparelho / Open the tray

2. Aperte a tecla DISC / Press DISC buton

3. Digite o código 99990 / Insert 99990 code

4. Feche a bandeja / Close the tray

Hi,
I have a region Code For A Philips HTS-3544 which is 1 model Down. You can try it, it may work or it May Not.
Heres How:- power on the TV/DVD without any disk in the player.Press open/close eject.
Press Stop 7.3.4.4.6.6 ( on the Remote )
The menu code appears On The Screen.
Press 0 for region Free, or the region Code Required.
Power Off and then on Again, if the codes have worked, your dvd player is now region free.

If this works please rate as Fixya.

many thanks mike @ Compurepair.

Hi 

TURN ON THE PLAYER 
PRESS OPEN/CLOSE TO OPEN THE TRAY 
WITH THE TRAY OPEN, PRESS STOP-7-3-4-4-6-6 

YOUR REGION AREA WILL BE DISPLAYED. 
PRESS "0" TO UNLOCK ALL 
PRESS "OK"

Press "Door Open"
- after the door opens perform the following sequence with the remote control:

Press STOP-7-3-4-4-6-6

a Region settings page will be displayed showing the current region on the TV (usually the default is region 1), using the remote control select the region number by pressing the number on the remote (select region 0 for region free) and press OK.