Question about Lucent PARTNER18 Corded Phone

2 Answers

Hello.. We have the parter-18D phone system. one of the phone rings when there is an incoming call, but it shouldn't, since this is not the main phone Ext 10. How can I program this phone to ring only when is a transfer call. Thanks

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Lucent Master
  • 860 Answers

Changing ringing on a Partner system is done on either ext 10 or 11.
At one of those ext's press the feature key and "00"
Next press the left hand intercom twice
The display should say system programming

Press the right hand intercom once. The display should say Centralized Programming.

Enter in the extension number that you want to program.

Press the line that you want to ring.
A solid light on the line means immediate ringing
A slow flashing light means delayed ringing (meaning the phone will wait 3 rings before starting to ring.)
A fast flashing light means no ringing.

When finished with that station press the right hand intercom and enter in the next extension to program and set ringing accordingly.

Press feature "00" to logout

Posted on May 06, 2010

Testimonial: "This info was very Helpful... I was able to program 2 phones.... Thanks!!"

Ad
  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 105 Answers

On the phone to be programmed:
1. Press "Feature 0 0"
2. Press the line button(s) to be changed, until desired effect below
-- Steady Green - Immediate Ring
-- Slow Flash - Delayed Ring (after 20 seconds)
-- Fast Flutter - No Ring
3. Press "Feature 0 0" again to end.

That's all there is to it.

Posted on Jul 26, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Incoming calls do not ring


Is the line ringing turned off? A quick check is to press Feature 00 from any extension and look at the line lights. If they flash fast then the ringing is turned off. To restore ringing press the line button until the light turns solid. Then press Feature 00 to save and exit.

Aug 26, 2014 | Avaya Partner 18 Eurostyle 18D telephone

1 Answer

My lucent Merlin ETR 18D is not ringing at all on incoming calles. The lights are flashing, but the phone does not ring.


hello,
i want you to go your phone setting, press the menu,scroll to profile, select the profile you are using and personalize it.
however, when personalizing scroll down to ringing type and select the ringing type you want.
if this does not work, open the phone, remove the ringer [the ringer is a small metal touching the panel of the phone, read it with meter, if it does not read, change it and replace it with a good one.

Jun 05, 2010 | Lucent Merlin Legend MLX-20L Phone

1 Answer

Avaya Partner System. 18D Phone. Suddenly, I get a beep when an incoming call hits the system. No idea why it started. How do I get rid of it?


Is the time and date correct on your phones?

Usually this means that the system has lost programming, and when a call rings in, the voicemail picks up. The system will need to be reprogrammed from scratch. The voicemail boxes and messages will still be there, but the phon system doesnt know where the voicemail is until its programmed.

Dec 15, 2009 | Avaya Corded Phone avaparp18d

1 Answer

Privacy


Unfortunately you cannot toggle this feature.
On extension 10 or 11
Feature 00
Left Intercom, Left Intercom, Right Intercom
Enter extension number that you don't want to ring
hit the line key until display shows No ring
To do next extension : Right Intercom and enter next extension number.
Follow same procedure for all extensions.
Feature 00 to exit programming

Let us know if you need additional assistance.
Cheers

Jul 16, 2009 | Avaya Eurostyle 18D Corded Phone

1 Answer

Turn off caller id


Unfortunatly the only way to do it is to take line access off that phone and have a button call pickup to access ringing line. In this scenario extension wont ring Reffer to programming manual on support/avaya.com Cheers

Jun 10, 2009 | Avaya Corded Phone avaparp18d

1 Answer

Lost power and need to reprogram lucent 18D.


Call in a vendor. Your system has lost all programming. Voicemail is goofed up to a point.....

The entire system needs to be reporgrammed.

Jan 07, 2009 | Lucent PARTNER18 Corded Phone

1 Answer

Incoming calls to office cause all phones to ring in classrooms


Changing ringing on a Partner system is done on either ext 10 or 11.
At one of those ext's press the feature key and "00"
Next press the left hand intercom twice
The display should say system programming

Press the right hand intercom once. The display should say Centralized Programming.

Enter in the extension number that you want to program.

Press the line that you want to ring.
A solid light on the line means immediate ringing
A slow flashing light means delayed ringing (meaning the phone will wait 3 rings before starting to ring.)
A fast flashing light means no ringing.

When finished with that station press the right hand intercom and enter in the next extension to program and set ringing accordingly.


Press feature "00" to logout
Hope that helps

Dec 02, 2008 | Lucent PARTNER18 Corded Phone

1 Answer

Noise in system


Probably in the module. Switch to different port on module and see if it clears the problem

Jun 17, 2008 | AT&T Partner 18 Phone (315805B)

2 Answers

Privacy


What you are experiencing is loss of programming. Is this fixed? Could be the batteries need replacing....

Feb 27, 2008 | Avaya Eurostyle 18D Corded Phone

Not finding what you are looking for?
Lucent PARTNER18 Corded Phone Logo

394 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lucent Lands Phones Experts

george  peters
george peters

Level 3 Expert

860 Answers

Paul C.

Level 1 Expert

59 Answers

tfelton3

Level 2 Expert

183 Answers

Are you a Lucent Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...