Question about Washing Machines

1 Answer

Hi, i put in my washing for the 90 degree cycle on my machine. The make of the machine is SERViS specifications 6kg 1000rpm A+A - but after it tun for about 5 minutes, i realised i had accidently out my phone in there as well so i stopped the machine and tried to open the door. it could not open. i tried switching the power off and waiting for an hour and back on but still the door coould not open. i put the cycle at spin - just in caase here was some water and once the cycle was done, tried again but nothing. could the hard thumping of the phone against the machine had caused the malfunction? Please HELP! thanks felista

Posted by on

  • misswangeci May 06, 2010

    Thanks for the quick solution.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

Stopping he machine mid-cycle may have caused it to become out of sync.

Unplug it for 20 minutes and re-try.

If the door does not open still - there is a problem with the door latch.

Thanks!

(cell would not have caused this issue)

Posted on May 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When we put the machine on a 90 degree washing cycle water and foam pour out from the detergent drawer


seems as if the water inlet from the detergent drawer to the drum could be clogged up might wanna have it cleaned or replaced

Jan 07, 2017 | Washing Machines

1 Answer

How to clean washing machine


Put the machine on a 90 degree wash with nothing in it, wait until it has filled and then pour three quarters of a cup of neat thick bleach into the soap drawer.

Put an old towel under the machine. The bleach will foam up and foam will come through the soap dispenser and all over the floor like a scene from a 1950's "The Blob" movie (The foam will also coat the entire inside of the machine as a result and kill any smelly bacteria).
Once the cycle has finished, throw 4 dishwasher tablets into the drum and put it onto ANOTHER 90 degree wash. At the end of these treatments, you should be a lot closer to a clean machine

Jan 30, 2016 | Bosch Washing Machines

1 Answer

How long does it take in a full cycle of wash to dry


Depends on several things. How big the drum is eg 6 kg or 7kg .the spin speed... The material ie. cotton drys faster than woollen items.is it a washer dryer or do you have a separate dryer.normal full load 6kg on a 1200 rpm spin of mixed fibres takes 1 hours 30 mins at 40 c then the dry time can take roughly 1 hour to 90 mins.

Dec 23, 2014 | Washing Machines

1 Answer

I need beko aa class 1000rpm operating manual


Hi Edwin, good day! For that specific brand and model, you can actually check this link for the file and download it from there:
Beko Automatic Washing Machine Installation Operating Instructions...

Sep 22, 2014 | Beko Wm & Wma Models Washing Machine Motor...

1 Answer

My servis m6011 5kg washing machine door won't


Possible that the door lock has jammed and so is not working.please check this link: door lock

Jul 03, 2012 | Washing Machines

1 Answer

Water in cycles is always cold


You need to check the heating element continuity using a multimeter. If there is continuity then check voltage at the time of the heating , if there is no voltage then the control panel is a suspect including the relay to the coil.

Dec 29, 2011 | Hotpoint Washing Machines

1 Answer

Simpson encore 605 wash machine 6kg. Washer pump


Hi mark just read your posting.Now what country do you live in.If you live in Australia then I can give you some phone numbers.Regarding your machine it does sound like the control board.Probably the power supply section of the board is faulting.Please reply with additional information and I can help you further.

Jun 19, 2010 | Washing Machines

1 Answer

Scum on my clothes espically whites help


you need to do more washs on 90 but dont put bleach in its just sludge build up between the drums vey normal ffrom doing warm washs all the time i do 95 degree washs evey three months to keep machine clean.hope this helps.

Mar 26, 2008 | Zanussi FJ1454W Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...