Question about Samsung HCM4215W 42" Rear Projection Television
I have a HCM4216W rear projection tv. It was purchased in 2003. Last night hte picture became distorted and was rolling quite a bit and then it appeared as if all 3 lamps went out of sync and I have 3 images (red, green and blue) rolling around the screen. It eventually went to a green screen that was skewed and did not fill up the entire display area.
Now it turns on to the green scree for a second and then shuts off. The red light flashes for a while and then stops. Any ideas
The convergence IC have gone bad, bad solder connections to IC or probably both. The board as a whole can be purchased as complete (look to the web to find where to get) and is fairly easy to replace. Unless you have extensive experience with component level repair I would suggest you take the board to a TV shop to repair. This option maybe slightly less then replacing board. Check with your local TV repair shop to see which option is the best in your area.
Posted on May 06, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Oct 12, 2010 | Samsung DLP HL-P4663W 46" Rear Projection...
Mar 18, 2010 | Sony KP-46WT510 46" Rear Projection HDTV
Jul 06, 2009 | Akai PT4799HD Rear Projection Television
Oct 18, 2006 | Akai PT4799HD Rear Projection Television
368 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: