Question about GE 13R100T 13" TV

1 Answer

GE TV/VCR 1995

I have a 13" GE TV/VCR. I bought it approximately, l995. It has been a wonderful Tv but this week, I can't get one of my channels in. All the other channels are fine, excet for channel 10, the program comes in on all the other TV's in the house. What could be wrong that one channel won't clear up. It has another station talking & it's black & streaky with the other sound on it.

Posted by on

  • Rae Weems
    Rae Weems Mar 28, 2008

    I couldn't retune it, it's all done on screen & only let you fix the color, contrast, etc.



    But, we switched with another TV, into another room & now it works. We're thinking it was a chip or something & when we moved it, it did something.



    Thanks for replying to my question.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 67 Answers

Have you tried retuning for ch 10? Is your TV on the same antenna/ connection as the rest in the house?

Posted on Mar 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to figure out how to change the Input channel?


Check and replace its main system memory IC. Contact any experienced service technician.

Feb 17, 2013 | GE 32GT740 32" TV

1 Answer

Code for sony tv


Hello
Three digit universal remote codes for Sony are:
002/ 006/ 071/ 128
For GE TV are
000/ 003/ 004/ 009/ 022/ 031/ 044/ 052/ 054/ 055/ 087/ 092/ 103/ 107/ 125/ 164/ 181

Four digit universal remote codes for Sony TV are:
0128 0013 0002 0071 0380
For GE TV are
0031 0107 0164 0004 0009 0044 0054 0000 0342 0003 0125 0015 0022 0052 0087
Your post contains both Sony and GE; and so I gives here codes for both brands.

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.

Mar 27, 2011 | GE 25GT240 25" TV

1 Answer

Ok we have a vcr a tv and a dvd player we hooked up the tv to the vcr and the vcr to the dvd player and we turned the channel to 3 on the tv and on the vcr to the channel 3 also but we don't have any audio...


YES!! the setup of some units are done only by REMOTE you could try a UNIVERSAL remote but they don't allways provide all the programming features...

Feb 13, 2011 | GE 19GT317 19" TV

1 Answer

Connecting GE 20GT406A TV to JVC HP-J643U VCR and DirecTV standard receiver. Playing VCR, get audio but no video on TV. What's the correct connections? TV has only a single co-ax input.


Go from the output(o/p) of the direct TV -where it says out to TVor out -to the input(i/p) of the VCR -where it says in from antenna or Ant. -then go from the o/p of the VCR -where it says out to TV -to the i/p of the TV.
The dierctTV and VCR should be both set to be used by the TV on CH3 or 4 (CH3/4 switch on back of VCR and DirectTV and the TV should be set to the corresponding channel (either 3 or 4).

Oct 19, 2009 | GE Standard (CRT) Televisions

1 Answer

Vcr channels only go to 13


the VCR my not have a tuner capable of receiving channels outside of VHF/UHF tuning. Best bet would be to search on-line for a owners manual for your VCR.

Jan 29, 2009 | Durabrand DWT2704 TV

1 Answer

Problem with old TV


The channel is almost always 3 or 4. Be sure you have the VCR connections correct. Just hook up the TV and VCR alone to start with and try both the VCR and DVD. Also the output of the VCR should show a blue screen.

Dec 17, 2008 | Memorex MT1194 19" TV

1 Answer

Television only locates 7 channels????!!!!!


Hi there!
If you cannot receive all channels it may be a fault with the antenna or the tuner may be faulty. If you have a VCR, you can tune that into the TV first and then tune the VCR to see if you then receive all channels. If so, use the VCR position on the TV to view and select or change channels on the VCR only. Good Luck,JUS004

Mar 07, 2008 | RCA F32649 32" TV

1 Answer

Connecting VCR/DVD combo


If you are able to you can connect to the RF connector (F Type Conncetor) on the TV. This should work. The layout is from the VCR (RF to TV) to the TV antenna F type connector from your Cable box to the Antenna in of the VCR that way you have cable through the VCR, and access to you VCR and DVD all controlled by the Cable and VCR remotes (set TV to Channel 3, set VCR to Channel 3) and use the Cable box as the tuner, Use the TV remote to switch between Cable and VCR inputs then use the VCR remote to switch between the VCR and DVD input.

Sep 20, 2007 | GE 25GT516 TV

1 Answer

Connecting VCR/DVD combo


Put the Tv on Channel 3

Jul 11, 2007 | Sanyo DS25390 TV

Not finding what you are looking for?
GE 13R100T 13" TV Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Standard (CRT) Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

The Knight
The Knight

Level 3 Expert

68301 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a GE Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...