Question about Pioneer GM-X962 Car Audio Amplifier

1 Answer

Audiobahn A400T2 car audio amplifier no output

Audiobahn A400T2 car audio amplifier powers up but has know output

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 54 Answers

It may be a faulty connection or more likely a blown output chip. They are relatively cheap to buy a new one, However fitting it yourself could prove problematic if you aren't handy with a soldering iron, and to pay someone else might cost as much as to buy a new one.
Sorry to be the bearer of bad news :( hope this helps.

Posted on May 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Could i wire my audiobahn Eternal subwoofers to my surround sound system?


is your subwoofer self amplified? if it has, you can connect it through audio sub output and in put to your self amplified subwoofer.. if it is not self amplified, you can still connect it but be sure it ca drive your subwoofer, it depends on RMS or watts of the original sub of the srround..or you can have a seperate amplifier only for your subwoofer. "Audio out - Audio in"

Aug 10, 2012 | AudioBahn AWES12P Car Subwoofer

1 Answer

Does an audiobahn A2801Q throw 1000 watts


Hello... I can help you with this question. This particular amplifiers specifications are as follows:

  • 200 watts x 2 @ 4 ohms stereo
  • 280 watts x 2 @ 2 ohms stereo
  • 560 watts x 1 @ 4 ohms mono
    These specifications are RMS power, which would mean continuous "real" power output. Hope this helps!

    20 year car audio/video installer
    Bay manager
  • Mar 15, 2011 | AudioBahn A2801Q Car Audio Amplifier

    1 Answer

    Audiobahn A6601T amp. Protection light on. No Sound output.


    Disconnect all speakers from the unit and then switch it on. If the protection light is still on then the output stage in the amplifier is blown.

    May 12, 2009 | AudioBahn A6601T Car Audio Amplifier

    1 Answer

    AudioBahn A2300HCT no sound


    Generally, if the amplifier smokes, the power supply FETs have failed.

    Many times, the output transistors fail and that causes the power supply FETs to fail.

    Audiobahn won't release schematics. The amplifiers are relatively simple and a schematic isn't generally required.

    If you know how to check the transistors, check them to determine the severity of the damage. If you don't know how to check them, read through the following page following all links provided.

    Basic Amplifier Repair

    Let me know if you have any other questions.

    Sep 04, 2008 | AudioBahn A2300HCT Car Audio Amplifier

    1 Answer

    Audiobahn DUB Mag Audio 2502 Amplifier


    If the protection light is on, the amplifier likely has shorted output transistors. To eliminate other possible causes, read through the following page.

    Amp in Protect Mode - Troubleshooting

    Let me know if you have any other questions.

    Aug 07, 2008 | AudioBahn DUB Mag Audio DUB2502 Car Audio...

    1 Answer

    Audiobahn powered subwoofer


    yep, they dont make audiobahn any more i think they still make other subs to one of them is DUB subs, ebay is the best place for me to find audiobahn, and for parts...

    Jul 24, 2008 | AudioBahn A2300HCT Car Audio Amplifier

    1 Answer

    Wierd stopped working audiobahn a2300hct


    Disconnect all speaker wires from the speaker terminals of the amp and disconnect signal cables from the amp. If it powers up normally, the wiring and speakers need to be checked. If it still shuts down, the amp likely has blown output transistors.

    Apr 05, 2008 | AudioBahn A2300HCT Car Audio Amplifier

    1 Answer

    Audiobahn A2502DP amp is alive but wont talk to me


    Your "bumpin" may have killed the amps "bumpin" Was the amp secure when you were sliding? So wires are ok, and lights and finas running. You have power but no output..Check the settings on the amp, also the fuse. Something might be earthing itself to the amp as well.

    Feb 14, 2008 | AudioBahn A2502DP Car Audio Amplifier

    1 Answer

    Baffled


    AudioBahn A2401Q Car Audio Amplifier: 100 watts x 2 @ 4 ohms stereo 140 watts x 2 @ 2 ohms stereo 280 watts x 1 @ 4 ohms mono ZT3000 "Beta tester of "0"s and "1's"

    Aug 25, 2007 | AudioBahn A2401Q Car Audio Amplifier

    Not finding what you are looking for?
    Pioneer GM-X962 Car Audio Amplifier Logo

    Related Topics:

    68 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Pioneer Car Audio & Video Experts

    Michael Kovalik III
    Michael Kovalik III

    Level 2 Expert

    117 Answers

    The Knight
    The Knight

    Level 3 Expert

    73691 Answers

    yadayada
    yadayada

    Level 3 Expert

    75117 Answers

    Are you a Pioneer Car Audio and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...