Question about Microwave Ovens

1 Answer

Replacing lightbulb in Sharp R953M combi microwave oven

Does anyone know how to access the interior oven light in a Sharp R953M combi microwave. Ours has failed and so needs a replacement bulb.
Many thanks!

Posted by on

  • Anonymous Mar 16, 2014

    I have an Electrolux Microwave Range Oven with C.R.V. I want to know how to use the "grill" and "combi" functions, but I don't have the manual.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 184 Answers

Most microwave ovens built in the last 20 years do not have an
access panel to the light bulb. you must remove the screws on the back of the microwave that hold the outer sleeve in place.
Then pull upward and backward on the sleeve to disengage it
from the front lip of the chassis. the light bulb should be close to the front of the microwave behind the control panel. Some lights
are not unscrewable from the socket, but the socket and bulb
come as an assembly.

Posted on Mar 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace the lightbulb in the microwave and what light bulb do I need to purchase?


to replace the bulb in microwave ovens you will have to take the outside case off the unit as the bulb placement is not accessible from inside the oven
when you get to the bulb take it to an appliance repair shop and they will have a bulb

Sep 09, 2015 | In Microwave Ovens

1 Answer

How do I replace the inside light on my R-520 ks Sharp Microwave


I don't know the exact model but most MWs have a plastic panel that pops off easily. Some, however you must take the cover off the MW oven. Just a tad more difficult.

Dec 25, 2014 | Sharp Microwave Ovens

1 Answer

How to replace lightbulb


Is this a countertop microwave or an over-the-rang (OTR) microwave? If it's a countertop model, you need to completely remove the outer case to get to the lightbulb. If it's and OTR microwave, there usually is an access cover located behind the grill vent. You can remove that grille vent by removing the 2 to 4 screws above the grill vent. Then either slide the grill vent 1/4" to the left to remove it, or else (depending on the model), just pull out the top of the grill vent, followed by the bottom. Then you should be able to see the lightbulb access cover. Usually there is 1 screw that you have to remove. But unplug the microwave before you to any further! Now remove the screw, lift up and remove the cover, and you should be able to get to the light bulb.

Aug 10, 2014 | Kenmore Microwave Ovens

1 Answer

I have a Sharp 963 combi oven.. The microwave has stopped heating everything else is working.


Hi,
Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips

heatman101 ]
][
\=-=-

Aug 01, 2011 | Sharp R-963 Convection/Microwave Oven

1 Answer

Changing the interior lightbulb of Maytag #MMV5207BCW over the range microwave? How the #$!% do you get the cover off to change the bulb?


I have a belling combi microwave, the covection oven works well but the microwave oven has stopped heating the food up and also the defrost isn't working ? Any tips or does it need repairing and wat are the costs?

Nov 24, 2009 | Maytag Appliances Over-the-Range Microwave...

1 Answer

Can not change interior lightbulb


how do I change the little light bulb on the top to take off the cover what do i need.

Please, lvinci@gmnew.com

Feb 01, 2009 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

Sharp R953M combination microwave oven


No this lcd card is only a diffuser to even the light out over the display . The part you require is SH3816 Pcb display available from CIS £68.43.

Jun 16, 2008 | Microwave Ovens

1 Answer

JennAir microwave JMC7000ADW lightbulb replacement


their is a panel up near the top on the right hand side of the interior cabinet just remove the screws and put in a new bulb

Jan 28, 2008 | Jenn-Air JMC7000 Microwave Oven

1 Answer

Lightbulb no longers turns on!


They do this to avoid liability from your exposure to the instantly lethal voltages present in and generated by your microwave oven. For important safety and disassembly tips, search on Yahoo.com (not Google) for all this at once (copy & paste): microwave disassembly.txt safety.txt The oven must first be disconnected from the power line. The outer cover is held in place by several screws on the back and sides, then you lift up and back from the rear to remove it. You need to avoid the sharp metal edges on thge cover and inside the oven. Note there are also catches built into the top & sides of the cover which must be re-engaged upon reassembly, or the cooling efficiency will be compromised. Once the cover's off, if there's any chance you might come into contact with any of the high voltage connections, the high voltage capacitor should be discharged for safety's sake. Once the bulb is located, it can be unscrewed and replaced.

Nov 22, 2006 | Panasonic NN-T990SA Microwave Oven

Not finding what you are looking for?
Microwave Ovens Logo

Related Topics:

499 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

224 Answers

Are you a Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...