Question about Plantronics Explorer 220 Bluetooth Headset Wireless Headset

1 Answer

Head set not pairing with sony erricson k750i

HI,
I bought this new plantronics explorer 240 and used it with iphone when it worked fine. I am now trying ti pair it with my sony erricson k750i phone and when i switch on the headset no red light then blue flash is seen. On switching on dsirectly blue light flashes on. The phone cannot find the device on searching. Could you please let me know what is the problem and how can i pair it with this other phone.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The solution for paring the explorer 240 is found in the bottom of the product page for the embedded link on the User Guide Link. I have also provided the instructions below. I hope this helps

How to Pair Your Phone With Your Headset for the First Time

1 Turn on the Bluetooth feature on your phone.
For most phones, select Settings/Tools > Connections >
Bluetooth > On. See your phone’s user guide for more information.
2 Turn the headset on.
Turn on your headset by sliding the Power Switch toward the microphone. Wait until the indicator light flashes red then blue.
If you don’t see the red then blue flashes, turn the headset off, then turn it on again. Press and hold the Call Control button until you see the red then blue flashes that indicate pairing mode status.
3 Set your Bluetooth phone to ‘discover’ to locate the headset.
This usually involves going to ‘setup’, ‘connect’ or ‘Bluetooth’ menu on your phone and selecting the option to ‘discover’ or ‘add a device’.
4 Once available headsets are listed, select your headset (for example 2XXPlantronics or 3XXPlantronics). If prompted for a passkey, enter 0000.
When pairing is successful, the indicator on your headset flashes blue. Your phone will also confirm when pairing is complete.

John M

Posted on May 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My bluetooth is paired i can not hear out of it


t sounds like the phone and headset may not be paired up correctly.
First, remember that newer phones are like small computers, so they
may become corrupt over time and you may need to reset them every so
often. Simply turn your phone off and remove the battery for a few
seconds, then replace the battery and turn it back on. Purge from the
phone any pairing information for your Explorer 240 headset and pair
it again to your phone, following carefully the instructions on the
attached link for the Plantronics Explorer 240. Also, make sure there
isn't any other bluetooth interference.

Plantronics Explorer 240 User's Guide

Good luck from Headsets Direct!

Jan 20, 2012 | Plantronics Explorer 240 Bluetooth Headset

1 Answer

How do i pair plantronics explorer 240 with LG CX265T


In the link below of the user guide for the Plantronics Explorer 240 (230) you'll find pairing instructions on pages 3-5. Also, remember that newer phones are like small computers, so they may become corrupt over time and you may need to reset them every so often. Simply turn your phone off and remove again the battery for a few seconds, then replace the battery and turn it back on again.

Plantronics Explorer 230 User's Guide

Good luck from Headsets Direct!

Dec 09, 2011 | Plantronics Explorer 240 Bluetooth Headset

1 Answer

Explorer 240 keeps shutting down even if Iphone 4 is in pocket. need to power off or resett bluetooth on phone


It may be something having to do with an upgrade application that may have been done. If this was what happened then you may have to down grade back to original settings. If this is not the case I would do a hard reset with cell phone let your battery go dead, remove from phone. place it back in and recharge re do the pair and or subscribe.

Plantronics Explorer 240 User's Guide


Good luck from Headsets Direct!

Jul 13, 2011 | Plantronics Explorer 240 Bluetooth Headset

1 Answer

Keep shutting off on my iphone 4


It sounds like you need to reboot the connection. First, remember that newer phones are like small computers, so they may become corrupt over time and you may need to reset them every so often. Simply turn your phone off and remove the battery for a few seconds, then replace the battery and turn it back on. Also, make sure there isn't any other bluetooth interference. Then follow the pairing instructions on pages 3-5 from the user guide in the link below for Plantronics Explorer 240/230.

Plantronics Explorer 230 User's Guide

Good luck from Headsets Direct!

Apr 19, 2011 | Plantronics Explorer 240 Bluetooth Headset

1 Answer

CAN I CONNECT A THIS TO A LAPTOP? IF I CAN HOW?


You can use the Plantronics Explorer 240 on your computer if your computer has Bluetooth built in. Just turn on the Bluetooth feature in the computer and pair up the headset. You can get a USB Bluetooth adapter if your pc doesn't have Bluetooth built in, then just pair the headset to the adapter. Here is a link for the 230 / 240 user guide, it will have the pairing instructions for the Explorer 240.

Plantronics Explorer User's Guide

Good luck from Headsets Direct!

Mar 17, 2011 | Plantronics Explorer 240 Bluetooth Headset

4 Answers

How to pair to the phone


Please follow this procedure:
  1. In the headset press and hold the call control botton until the indicator turns red and then turns off, press and hold the call control botton until the indicator light continues to flash red and blue, the headset is now in pairng mode.
  2. In your phone, go to bluetooth conectivity and select scan for devices, select de Plantronics bluetooth headset from the list, enter 0000 for the passkey and OK/accept to bond them.

Mar 01, 2011 | Plantronics Explorer 240 Bluetooth Headset

2 Answers

I have a droid x and a friend gave me an plantronics explorer 240 cause she had gotten another one. I thanked her not thinking to ask how it worked like what buttons was what and how to connect it to my...


First of all, go into Settings and then Wireless & Network settings on your Droid X, then push Turn on Bluetooth. The check mark in the box should be green once its on. Then click Bluetooth Settings. Meanwhile, turn on your headset by sliding the power switch towards the microphone. The light should flash blue and red. Now go back to your phone and push Scan for Devices, at which point you should see something like "XXXPlantronicsHeadsetXXX". Push that, and it should work. IF it asks you for a passcode, its 0000. Here's the Plantronics help site: http://www.plantronics.com/us/common/easytopair/#/explorer-240

Feb 21, 2011 | Plantronics Explorer 240 Bluetooth Headset

1 Answer

Can i pair my new iphone with a used plantronics 220


Yes, sure. Begin with the headset turned off. Then, press and hold the multifunction button until the blue and led lights flash alternately. The headset is in pairing mode. Now, make your iPhone's bluetooth application ('Home screen > Settings > General > Bluetooth') search for new devices. After a while, the heaset will appean on the phone screen. Select it and command the application to proceed. If a pairing code (or PIN, or passkey) is resquested, enter '0000' (four zeros).
Hope it works for you.
Cheers! Carlos

May 14, 2010 | Plantronics Explorer 220 Bluetooth Headset...

2 Answers

I cant pair my explorer 230 to my new phone?


The head set is still set to the old phone, hold down the call control button until it starts flashing red/blue. then it will be ready for your new phone to find it. (remember if you didnt change it the password will be "0000"

Apr 10, 2009 | Plantronics Explorer 220 Bluetooth Headset...

Not finding what you are looking for?
Plantronics Explorer 220 Bluetooth Headset Wireless Headset Logo

427 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plantronics Radio Communications Experts

LeAnna Mathews
LeAnna Mathews

Level 1 Expert

3 Answers

shaun taylor

Level 3 Expert

1525 Answers

Michael Vincent Cruz

Level 3 Expert

868 Answers

Are you a Plantronics Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...