Question about Whirlpool Dishwashers

1 Answer

Dirty dishes, pump acid wash.

Whirlpool Gold Quiet partner III (3) dirty dishes diagnosed as pump needs acid wash. Does this make sense? How can I do this?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 949 Answers

I would not recommend using acid in a dishwasher it could lead to premature seal failure and damage the internal components.

There are cleaners that can be used that are dishwasher safe such as Lemi-Shine, Glisten, Rinse Aid dishwasher cleaner etc. Vinegar works pretty good too.

Depending on what the symptoms were a pump cleaning may be needed, before you act check out these tips I put together, feel free to send me a message back with any questions.

http://www.fixya.com/support/r4666624-hard_water_calcium_white_powder_build_up

http://www.fixya.com/support/r4628450-poor_cleaning_or_noisy_pump_whirlpool_or

Posted on May 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Whirlpool gold Quiet partner III. The Normal button of the cycle is blinking and I can't start the dish washer. What is going on?


most likely the door switch is not making contact or is faulty. Shut the door tightly and see if it makes any difference.

Please provide the full model number of the dishwasher in case you need further help.

Aug 26, 2011 | Whirlpool Gold 24 in. Built-In Dishwasher...

1 Answer

My whirlpool Gold Quiet partner III won't wash. Dishes come out greasy.


Add Jet Dry and run a cycle with dishwasher empty with bleach and should start working good

Nov 19, 2010 | Whirlpool Dishwashers

1 Answer

I have a Whirlpool Gold Quiet Partner III dishwasher. When I unload the "clean" dishes, there is some type of film or crud on the dishes. I have to hand wash them to get this off. It seems like a...


You need to check the drain system completely, look for plugged screens, pump impellers, valves and the drain hose. You need to witness a large volume of water flow during drain.

Sep 19, 2010 | Whirlpool Dishwashers

1 Answer

My 6 year old Whirlpool dishwasher is loud


This is a bad wash pump. Looking at about $175 for just the sump assembly. You could do it yourself, but unit would need to be uninstalled.

May 28, 2010 | Whirlpool Gold 24 in. Built-In Dishwasher...

1 Answer

Our quiet partner iii dishwasher is not working. It is not gettting dishes cleaned soap left on dishes


Our whirlpool gold quiet partner iii dishwasher is not working well . It is not gettting dishes cleaned soap left on dishes on top primarily

May 16, 2010 | Dishwashers

1 Answer

The dishes coming out dirty on my Whirlpool Gold Quiet Partner IV. Cycle seems to complete. The soap is being used. Not sure how old it is ... it came with a house I just bought. Any suggestions?


Clean the jets on the unit. Jets are the small openings the water comes out of. Contact Whirlpool, follow their recomondations, or add some CLR or Lime Away to the washer without a load of dishes. Both products remove Calcium Lime and Rust deposits which impede the flow of water, causing your dishes to come out dirty

May 16, 2010 | Dishwashers

1 Answer

Whirlpool gold quiet partner iii bearing noise


if its noisy when washing check chopper assembly. if its ok change the sump pump assembly

Feb 09, 2010 | Whirlpool Dishwashers

1 Answer

RUN TIME ON NORMAL WASH IS ABOUT 3 HOURS


common failures on that usually are the heating element. Look at the botton and see if it is broken anywhere.

Mar 22, 2009 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Whirlpool gold quiet partner IV


You probably need to clean the filter; here is a site to show you how to do it: http://01tutorials.com/video/1686251/how-to-clean-the-filter-on-a-whirlpool-gold-quiet-partner-iv-dishwasher/4107

Sep 20, 2017 | Whirlpool Gold 24 in. Built-In Dishwasher...

7 Answers

Whirlpool Gold quiet partner III, leaves dirty, greasy dishes


Replacement parts for this type of dishwasher can be found on amazon. here: Amazon com Whirlpool Gold quiet partner III parts (You can ask sellers for particular problem, they know the best.) I hope this was helpful. Cheers

May 18, 2008 | Whirlpool GU2400XTP Built-in Dishwasher

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Mike

Level 3 Expert

4340 Answers

Owen Barnes

Level 3 Expert

867 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...