Question about Magic Chef 9112 Gas Double Oven

2 Answers

I cant find a model number for my oven its a Gaffers & settler power energy range the only thing i can make out is ANS 721.1 1982 I need to order an ignitor for it but need the model number. I ordered a part it didnt work and in order to have another one sent I need the model number. Please help!!

Posted by on

  • 2 more comments 
  • candyssapple May 05, 2010

    I cant find a model number for my oven its a Gaffers & Settler power energy range the only thing i can make out on it is ANS 721.1 1982 onthe metal sheet inside the stove top is almost impossible to read. It is not where you said there is nothing there just the metal plate thing inside the stove top



    I ordered a universal ignitor for it and it didnt work In order to have another one sent I need the model number.

    It was just replaced in December and burned out again. It seems to burn out from using the broiler but this time Im not sure if it is the ignitor and something else with it. We put on the ignitor and nothing happened. Is there some sort of manuel for these stoves.Im going to call the gas company to come out and check the wires to see if that is working properly. Please help I live in an apartment and my landlord complained about fixing it last time. I am disabled and am barely keeping a float so I dont want to make waves with him because he will raise the rent.

    thank you
    Candis

  • candyssapple May 05, 2010

    I cant find a model number for my oven its a Gaffers & Settler power energy range the only thing i can make out on it is ANS 721.1 1982 \r\nThe metal sheet inside the stove top is almost impossible to read.

    I ordered a universal ignitor for it and it didnt work In order to have another one sent I need the model number.

    It was just replaced in December and burned out again. It seems to burn out from using the broiler but this time Im not sure if it is the ignitor and something else with it. We put on the ignitor and nothing happened. Is there some sort of manuel for these stoves.Im going to call the gas company to come out and check the wires to see if that is working properly. Please help I live in an apartment and my landlord complained about fixing it last time. I am disabled and am barely keeping a float so I dont want to make waves with him because he will raise the rent.

    thank you
    Candis

  • candyssapple May 05, 2010

    I cant find a model number for my oven its a Gaffers & Settler power energy range the only thing i can make out on it is ANS 721.1 1982 on the metal sheet inside the stove top its almost impossible to read it. There is nothing on the doors or edges of the oven or in the oven

    I ordered a universal ignitor for it and it didnt work In order to have another one sent I need the model number.

    It was just replaced in December and burned out again. It seems to burn out from using the broiler but this time Im not sure if it is the ignitor and something else with it, the ignitor was fried. We put on the ignitor and nothing happened. Is there some sort of manuel for these stoves.

    Im going to call the gas company to come out and check the wires to see if that is working properly. Please help I live in an apartment and my landlord complained about fixing it last time. I am disabled and am barely keeping a float so I dont want to make waves with him because he will raise the rent.

    thank you
    Candis

  • candyssapple May 05, 2010

    I will try looking there.

    thank you

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Magic Chef Master
  • 76,164 Answers

The model number is on a paper tag on the back of the oven, if it isn't there we have no way to look it up here at fixya or any other site for that matter, so pull the range out and check for the tag.

Posted on May 05, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,059 Answers

Here are the usual places. look on the back side of the door at the bottom or edge. On the vent trim behind the center of the door.

Posted on May 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I turn off the timer on my gaffers & sattler wall oven?


Try rebooting the oven; unplug it for 90 seconds, or flip the circuit breaker off for 90 seconds, then back on.

Apr 17, 2016 | Ovens

1 Answer

What's F4 error code stands for?


Hello Richard;

My name is Peter. I am a retired field service appliance technician.

You did not provide a model number and manufacturer. So, the following is a general description of a F4 code.

The error code "F4" will be displayed along with a beeping sound if the ERC (Electronic Range Control) or "clock" determines an open oven temperature sensor circuit during the "cook" (bake or broil) mode. The "F4" message will not be displayed in the time of day mode. The cause of the problem is a bad oven temperature sensor or its wire harness. The access to the oven temperature sensor plug and the wires is from the back only. You have to pull the oven out of the wall (if it's free standing) or remove it from the cabinet (if it's built in). Disconnect the power and remove the rear cover. Check the resistance across the oven temperature sensor. It is supposed to be about 1100 Ohms at room temperature. If the resistance is incorrect, the oven temperature sensor is bad and needs to be replaced. If not, check all the wires from the oven temperature sensor to the ERC. If it is not the sensor and wires, you have to replace the ERC.
To get the right replacement part just click on the link AppliancePartsPros, then type the model number of your oven in the search box, click on the "search" button and in the new window type the word "sensor" or the word "clock" in the "search by keyword" box and click the "search" button.

You can go into the following website put in your model number and get diagrams ans component part numbers.
Your model number is on a label either on the face of the oven when you open the door or on the side of the oven door.

Water Filters Lawn Garden Appliance Parts

Mar 11, 2016 | Ovens

1 Answer

Pad on oven does not work cant start oven


PDF]ELECTRIC RANGE USER INSTRUCTIONS - KitchenAid

https://www.kitchenaid.com/.../Use%20and%20Care_EN.pdf

KitchenAidIf you should experience a problem not covered in TROUBLESHOOTING, ... You will need your model and serial number, located on the oven frame behind the top right side of the oven ..... Do not press the Off keypad because the oven will turn off. START. Cooking start .... They could leave aluminum marks that cannot be.

Oven Won't Turn on - Repair Parts - RepairClinic.com

www.repairclinic.com/RepairHelp/...Fix...Stove-Oven/...---/Oven-won-t-t...
Most Frequent Causes for Oven won't turn on. ... The igniter is the most commonly defective part for a gas oven that won't turn on. ... For bake & broil burner ignition anoven burner spark electrode is used to ignite the gas.

Dec 01, 2015 | Ovens

1 Answer

I have a kennmore oven cant find the serial number for a new oven element its old model looks like mid 1996


The model number/serial number plate for most Sears Ranges is behind the oven door, in one of the four corners of the opening.

Nov 03, 2015 | Ovens

1 Answer

How to disable energy saving on KitchenAid Range


The Energy Saver Mode deactivates the display to reduce energy
consumption.
To Activate the Energy Saver Mode:
1. Press and hold OPTIONS for 3 seconds. "Energy saver on."
will appear in the upper text area.
2. The setting will be activated after 5 minutes.
Any cooking function may be used with the range in Energy
Saver Mode by simply selecting the desired function.
To Deactivate the Energy Saver Mode:
1. Press and hold OPTIONS for 3 seconds. "Energy saver off."
will appear in the upper text area.
2. The clock will reappear in the display, and the range can be
operated as usua

Oct 10, 2012 | KitchenAid Ovens

1 Answer

Error: F 10


Hello,
That model number does not seem correct but error code F10 on the Electrolux ovens relates to a faulty power board.If that Serial is correct then it is still covered in the 12 months full warranty.

Hope that helps.

May 11, 2010 | Electrolux ICON Designer E30SO75ESS Oven

1 Answer

HEATING ELEMENT GAFFERS & SATTLER BUILT-IN OVEN


our 1985 gaffers and sattlers oven would not turn off tonight. Any idea? Its Propane oven

Dec 22, 2009 | Ovens

3 Answers

My kenmore electronic stove is having a beep with code F1 on the


Please use the chart to determine which stove you have. You will have to look at the model number. The first 3 numbers will be the series on the chart. In most cases an F1 error would require replacment of the electronic control. This part is commonly refered to as an EOC or ERC. However this type of repair is usually reserved for repair specialists.

KENMORE Range/Stove/Oven Fault Codes – 362 Series (General Electric)
F1 = Stuck Touch Pad Key - Replace Electronic Range Control (ERC).

KENMORE - 911 Series (General Electric/Roper)
F0-F1-FF = Failed transistor in Electronic Range Control (ERC).

KENMORE Range/Stove/Oven Fault Codes- 665 Series (Whirlpool)
F1-E0 EPROM Error - Electronic Range Control (ERC).
F1-E1 EPROM Error - Electronic Range Control (ERC).
F1-E2 U/L ERC Errors - Electronic Range Control (ERC).
F1-E3 Fuel Type Fail

Kill power 30 seconds-Cancel-Start/Enter-5 seconds-Should see “E” for electric-
“9” for gas-If code changes again-replace Electronic Range Control (ERC).

KENMORE - 790 Series Electronic Oven Control (Frigidaire)
F1 = Shorted Touch Pad = Electronic Range Control (EOC) Internal checksum error.
Runaway Temp = Replace Electronic Oven Control (EOC).

Kill power 30 seconds - if error returns - replace Electronic Oven Control (EOC).

Dec 15, 2008 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

Old Gaffers& Sattler oven won't heat up. I suspect timer setting?


The most common failure in any electric oven is the heating element.

Jun 20, 2017 | Ariston Technologies Ariston FO98P...

Not finding what you are looking for?
Magic Chef 9112 Gas Double Oven Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Magic Chef Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2183 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a Magic Chef Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...