Question about Canon MPC-400 InkJet Printer

1 Answer

What does ### 343 fault code mean - Canon MPC-400 InkJet Printer

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,230 Answers

Hi there,

Well this error code is due to "waste tank full" alarm, you may need to reset the waste tank counter. Please follow the below steps to reset the waste tank -

1) Enter SERVICE MODE by pressing Menu-Copy-#
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of and then press the [ON/OFF] key.

Skip step (6) if there no [OK] key on this printer.

Good Luck!!

Thanks

Posted on May 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Xerox error code 10-343


010-343 not reset code hav

Feb 19, 2014 | Xerox DocuColor 12 Printer

4 Answers

Error Code - 9-343 on Doc 12


it seems you have problem in sensor ...........

change the FD interlock......

Oct 23, 2008 | Xerox DocuColor 12 Printer

1 Answer

Error code 9 343


Error code 9 343 - Xerox DocuColor 12 Printer

Jan 08, 2014 | Xerox DocuColor 12 Printer

1 Answer

The fan works until the oven starts heating up, oven is putting out a code F11


From the tech sheet:

Fault
Code Description Component to Troubleshoot/Replace

F1-1 Oven temperature above 650° F (343° C) in bake mode. Ohm sensor and harness (see "Oven Sensor" chart).
If OK, change control.

This may be due to your fan failing or a problem with the control board. We rebuild these controls at fixyourboard.com.

Aug 14, 2010 | Jenn-Air JES9800AAS Electric Kitchen Range

1 Answer

Canon MP36 error ##343


Hi,

The error code means "Ink Detection Waste Ink Tank Full". This means that the ink pad needs to be replaced. Also, dont forget to set the eepron counter to 0. Please follow the steps:

Press

ADITIONAL FUNCTIONS
SCAN
COPY
SCAN
scroll to TESTMODE
scroll to PRINTER TEST
scroll to EEPROM CLEAR
and the press the numeric key 3 or and keys.
Select INK COUNT, and then press the
numeric key 0 or and keys to reset the waste ink capacity.
Press the [Stop/Reset] key and then the
[ON/OFF] key to end the test mode.

I tries to replicate this error in my printer and I was able to aolve it with the above mentioned steps.

Hope this helps!

Rehards,
HP

Aug 28, 2009 | Canon SmartBase MP360 All-In-One InkJet...

1 Answer

Error code 9-343


all 9-xxx codes are xerographic problems,such as toner,drum,developer or auto density.install or replace one or the other.

Jun 30, 2008 | Xerox DocuColor 12 Color Copier

1 Answer

I got a Error code 9-343


any 9 -xxx code is related to the xerographic area of the machine NOT the fuser area- you don't mention the model number so I can't be specific, but try the Drum/CRU/toner area, make sure you haven't dislodged anything (modules, plugs, sockets etc.)

May 08, 2008 | Xerox DocuColor 12 Color Copier

1 Answer

##343


Hi, If memory serves me right, this indicates that the waste ink absorbent material is full. They are considered consumables and therefore are to be replace after some time as in your case since they are full. You can do it yourself buy it's a messy job and you have to buy the spongelike wasteink absorber. It may be better to seek the services of a qualified professional or the Canon service. Hope this be of some help to you. Good luck.

Aug 12, 2007 | Canon PIXMA MP780 All-In-One InkJet...

3 Answers

Error code ##343


We have just attempted to install an Cannon imageclass mp360 and the error message "check printer ##343" is displayed.

Can you please help.

May 14, 2007 | Canon SmartBase MP360 All-In-One InkJet...

Not finding what you are looking for?
Canon MPC-400 InkJet Printer Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1973 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...