Question about Toshiba TEC B SX4T Printer

1 Answer

How to configure internal LAN in B-SX4T barcode printer?

I am not able to find in manuals how to configure internal LAN card in TEC B-SX4T barcode printer. Please help.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 24 Answers

I hope thisis understandable.

  1. Switch printer off
  2. Whilst pressing the [FEED] and [PAUSE] keys, switch the printer on. Display shows D I A G . V 3 . 1
  3. Press [FEED] button 6 TIMES or until the display shows I P A D D R E S S
  4. Press [PAUSE]
  5. Press [PAUSE]. Display shows IP Address
  6. Using the [FEED] and [RESTART] buttons, change the 1st number in the IP address
  7. When you have reached the number you want, press [PAUSE] to step to the 2nd number in the IP address.
  8. Again Using the [FEED] and [RESTART] buttons, change the 2nd number in the IP address
  9. Again when you have reached the number you want, press [PAUSE] to step to the 3rd number in the IP address.
  10. Repeat steps 8 and 9 until you have the 4 digits you want in the IP address.
  11. After the 4th number has been entered and you press [PAUSE] you can change the GATEWAY IP ADDRESS.
  12. Step through the above sequences to get the GATEWAY IP ADDRESS you want.
  13. You'll then move onto the SUBNET MASK IP ADDRESS. Same steps as before.
  14. The next and final item is the SOCKET PORT, enter this 5 digit number as above, stepping through each of the 5 elements that make up the 5 digit number.

Posted on Dec 17, 2010

  • pkwc Aug 16, 2011

    You can use this code to do your lan settings:
    {IP;2,192,168,001,201|} adress
    {IP;3,000,000,000,000|} gateway
    {IP;4,255,255,255,000|} sub mask
    {IS;1,09100|} port enabling

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am getting dull print in TEC B-SX4... but i load stock correctly


You may have to realign the print head.
The angle may be different from the original one

Aug 30, 2011 | Toshiba TEC B SX4T Printer

1 Answer

What is the best software to use for the Toshiba BSX4T Printer : with LAN card ? jack boychuk


Use seagull dirver and bartender. A light version is delivered with each printer

Aug 25, 2011 | Toshiba TEC B SX4T Printer

1 Answer

We have a TEC BSX4T laser printer that is not printing correctly. Once you type info in..press print..the printing becomes progressively off centered with each successive label. Someone suggested the...


Plce the media guide correctly and check that the roll is centered correctly. Else you may have a problem with the alignement of the head on the platen.

Aug 25, 2011 | Toshiba TEC B SX4T Printer

1 Answer

Toshiba BSX4T Printer : installed LAN card : can PING the IP ... CANNOT get the web interface HTTP with browser


To do this you need to add the ata card option with the page loaded
To do that you also need a utility to download the pages to the printer.

Aug 18, 2011 | Toshiba TEC B SX4T Printer

2 Answers

Hello, where are a reseller of toshiba labelprinters type SX4. One of our customers has problems with printing labels. The errormessage on the screen of the labelprinter is: INLINE B-SX4T U5.0 and...


Well at my old company we use to get our's fixed and replaced from toshiba TEC in London.
Campus 300, Spring Way, Maylands Ave Ind Est
Hemel Hempstead, Herts, HP2 7GG
United Kingdom

info@toshibatec-eu.co.uk.

(0)870 890 7200

Aug 17, 2011 | Toshiba TEC B-SX4 Thermal Label Printer

1 Answer

CODE128 barcode problems


The printer of the number under the barcode is an option when you define the barcode. check in your programing manual.
Concerning the size of the barcode 128 . This is determined by:
- Print head resolution in your case each bar is 0.125mm thick
- The other bars are a multiple of this thin bar. This is the only constraint

Apr 20, 2010 | Toshiba TEC B SX4T Printer

1 Answer

How do you setup the IP address on a toshiba tec b sx4t printer?


In diag mode (pause and feed key depressed switch on )
go to ip adress and change the value or use the instructions
{IP;2,xxxx,xxxx,xxxx,xxxx'} for the ip
{IP;3,xxxx,xxxx,xxxx,xxxx'} gateway
{IP;4,xxxx,xxxx,xxxx,xxxx'} subnet mask
socket port
{IS;1,09100'} for socket number and activation
{IS;0,09100'} for deactivation

Sep 30, 2009 | Toshiba TEC B SX4T Printer

1 Answer

I am having problems with bar gain issues with Tesco


Tesco prefers 300 dpi printers.
use a bsx5 printer or the bex4t printer

May 20, 2009 | Toshiba TEC B SX4T Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

3,137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba TEC Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

matt
matt

Level 3 Expert

954 Answers

richie46

Level 3 Expert

12962 Answers

Are you a Toshiba TEC Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...