Question about Sewing Machines

1 Answer

Carriage is not returning consistently on memory craft 300E

I have a memory craft 300E and the carriage is not returning consistently. I use it only for monogramming and the machine will start at a specific opint but it seems to shift so the final product is not aligned with the first stitching. What can be done to repair this?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 179 Answers

Ok... the arm that the hoop attaches to could be bent and not moving freely. Because it sticks out the back of the machine it can be bent by tilting the machine backwards. You can try to hand bend it to correct the problem. The other cause will be wear in the belt system if you have used it a lot. I have seen a few that the whole embroidery unit needed to be replaced because of use.

Posted on May 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i get more designs for my Memory Craft 300E


Call the shop where you bought the machine they will tell you or sell them to you.

Oct 25, 2016 | Sewing Machines

1 Answer

Janome memory craft 300e


Machine is not threaded correctly
and the bobbin is not inserted correctly.

Jan 26, 2014 | Sewing Machines

1 Answer

Have lost needle plate setcrew for Janome 300e part number 82039006


They will not cost much but you will have to go to a dealer for the right part. There are a lot of rules, they can lose their dealership by selling online.

Jan 22, 2014 | Janome Memory Craft 9000 Computerized...

1 Answer

JANOME 300E thread jamming & breaking when embroidering over previously embroidered section.


It's too thick in that area. this happens sometimes when you get designs made for one of the larger or professional machines. Not much you can do unless you have a digitizer and can reduce the amount of under stitching.

Sep 27, 2013 | Janome Memory Craft 3000

1 Answer

Looking for online user manual for Janome Memory Craft 300E


Hi,

You can view and download the instruction manual in PDF format by clicking this link.

You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/

Hope this helps. Thanks for using FixYa.

Jul 20, 2010 | Janome Memory Craft 9000 Computerized...

2 Answers

Strange noise from the lever that connects the hoop to carriage


Sounds like you may have a belt problem or possibly an object in the carriage system. Underneath the free arm there is a cover that can be removed so you may inspect the area. I would remove it and take a look, maybe you will be lucky and find an object there that is causing the noise.

May 31, 2010 | Janome Memory Craft 10000

1 Answer

Does this machine have a low shank --- or high shank?


High Shank Machines are all the Janome Embroidery models MC 8000, MC 9000, 10000, 10001, 11000, 200E, 300E, 350E....etc
If yours is not an embroidery machine, it has a LOW SHANK .....the higher shank allows for easier access for the embroidery hoop


Bargain Box

Apr 19, 2010 | Janome Memory Craft 9000 Computerized...

1 Answer

What is a fat error on a janome 300e


l am having a problem opening in customizer 10000 for my 300e to download designs to flashcard it comes up fat error have tried on another hard drive is the same problem it is not that l havent done this before all has been going ok till now could you please advice me as to what l can do. patricialglass@gmail.com

Sep 13, 2009 | Janome Memory Craft 9500 Computerized...

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Chris Wetmore

Level 2 Expert

185 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...