Question about Golden Technologies Companion II Travel Scooter

1 Answer

Scooter will not move forward or revese,it makes a split second contact then stops

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 23 Answers

When mine does this it means she is not fully in gear. Try manually moving it back and forth a few inches and see if it clicks in.(Like moving the seat back in the car and it doesn't quite click in.) If it doesn't work take it fully back out of gear and try again.

You could also try checking the key is in straight, and that all the cords are plugged in tight. You may need a hand with this, as you need to lift the chair off, (Straight up) and then the cover of the back section, removing the locking pins as you go. My loocking pins tend to get very stiff and I cant pull them out myself due to arthritis:)

If all else fails, check the troubleshooting page (33) of the manual, available in pdf at

http://www.rentascooter.com/downloads/_manuals/pridemobility/Pride%20Victory%20Owner's%20Manual.pdf

Hope this helps.

Posted on May 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 240 rascal scooter that will not engage forward are revese,could it be the throttle pot and if so how would I test it?


Hi to test it u will have to remove it & use a multimeter to check its resistance in ohm's ...cheers

Apr 13, 2017 | The Health & Beauty

1 Answer

How can I fix my mobility scooter. when the forward paddle is pulled the scooter moves away then begins to slow to almost a stop


Sounds like you need a new paddle switch? If you can get inside it you could try spraying it with WD40.

Jan 20, 2016 | Health & Beauty

1 Answer

Pride celebrity x scooter flashes 6 times and s ometimes 5 times


hi, they are good readings, the brake resistance is a bit low...however does the brake click when moving the throttle lever to go forward or backwards ?

if the brake is not releasing the scooter will never move...

does the throttle lever feel loose ? you need to convince yourself that the throttle part is working correctly , if you double checked everything including the brake and connectors then we need to look at the controller ..

I do offer a free testing service...

Regards
Rob

Aug 24, 2015 | Pride Celebrity X 4-Wheel Electric Scooter...

1 Answer

Go go traveller mobility scooter lurches forward when finger is released off forward control lever. mum has problems getting it to move forwards smoothly and slowly without it suddenly moving forwards...


That lever is attached to a pot. Pots have this nasty habit of oxidizing. You can either replace it or get some CRC QD Contact Cleaner. Wash it down trying to get as much cleaner into the pot as you can. These pots are normally not sealed find a little hole and spay it there. While your in the control head use the cleaner to clean anything you find in there. Stall having problems contact me.

May 30, 2012 | Health & Beauty

1 Answer

Hello, my scooter is fully charged, all the lights and horn are working. But it will not move forward or backward. The small green light flashes 7 times and stops for a while before flashing again. The...


outback you will have to get a new speed pot and replace the old one. Contact the provider where you got your scooter to see if they will fix it for you Hope this helps

Apr 16, 2011 | Health & Beauty

1 Answer

Hi my days strider midi4 keeps going in reverse for about 4 seconds after you take the throttle off


spares sounds like the throttle pot is not being centered upon release making the scooter move in reverse or forward depending on which way it is off center. try pushing on the thottle lever slowly forward when you stop to see if that stops the creeping. Then you can try to adjust the pot by loosening the lever and retightening it in the forward direction that stops the creeping. You might have to order a new throttle pot assembly to get this working right. Hope this helps

Nov 18, 2010 | Electric Strider Midi 4 Wheel Mobility...

1 Answer

Go Go Scooter travels in reverse, but when going forward it comes to an abrupt stop every few seconds. Everything else appears to work normally. Any ideas?


csr4 Well it could be the throttle pot or the speed control pot My leanings is toward the throttle pot since it works in reverse with the speed pot not being changed but not forward. when you are just changing the position of the throttle to forward thereby changing the pot wiper and getting the error. Contact Pride about the problem at 1-800-800-8586 and ask for Tech support for scooters and explain your problem to them. I hope this helps

Oct 02, 2010 | Pride Go-Go Ultra X 3-Wheel Travel Scooter

1 Answer

Small bar on tiller to make it go forward and reverse broken so no way to control start and stop. Also, free wheel is broken and scooter moves when in stop mode or key is removed. can I still use it,...


Hi. Are there other faults as well? Maybe you should get another quote from a different technician, or ask him if he has any second hand parts available.
If you use it, and you cant control it, you end up down a bank or under a bus.
What brand and model is it?
Sometimes the brake disc in the brake unit splits and allows the machine roll on. Sometimes the brake lever has had a bump, and just needs to be pushed back into place properly.
Try contacting the authorised service people for this scooter, and get some prices from them. Good luck. Neil.

May 13, 2010 | Electric Mobility Mobility Electric Power...

Not finding what you are looking for?
Golden Technologies Companion II Travel Scooter Logo

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Golden Technologies Health & Beauty Experts

Robin Hill
Robin Hill

Level 3 Expert

1263 Answers

wcdoc1953
wcdoc1953

Level 2 Expert

280 Answers

Colin Taylor

Level 2 Expert

346 Answers

Are you a Golden Technologies Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...