Question about Poulan/Weed Eater No. 5000p 952711612 Pole Pruner Attachment

1 Answer

Weedwacker stalls out .it starts then put on half choke once put to run stalls

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Poulan Master
  • 7,482 Answers

Sounds like you will need to clean your carburetor.
Sometimes you can get by with priming it a few times, and letting it
run a few times like that and it will flush the gunk out of the jets,
but most of the time you will need to rebuild the carburetor.
If the mower is over a couple years old, then I also recommend that you
buy and install a new carburetor repair kit, because the diaphragm will
get hard and that will cause it to be hard to crank.
When you clean your carburetor and remove the jet screws, count the
number of turns it takes to seat the jets from their original position.
That way when you go to put the jets back in, you know how many turns
they were in/out.
Please rate me, Thanks
Good Luck, I hope this helped

Posted on May 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to start a ryobi200blower blower 200


First , prime the priming bulb about 4 x...

Next put the choke lever in full choke position

Give a couple slow pulls, then a good strong pull...

(The unit should burp, run for a second)

Next put the choke lever in the half choke position

Pull rope

It should start and run, now put the choke lever all the way in the off position and let unit warm up a minute... if when you turn choke off it stalls out, u didn't warm it up enough...

Oct 10, 2015 | Garden

1 Answer

How come weedwacker tries to crank while on choke but when you move lever to 2nd position it tries to crank? but wont


When mine does that I go back and reprime repeating the process. It seems the gas does not feed up fully with the initial priming effort. Once it starts I move the choke lever quickly on way or the other to see if I can keep it running until it gets warmed up. Sometimes I have to adjust the choke setting even after it has run for a while.

Sep 21, 2014 | Craftsman WeedWacker Gas Trimmer 25cc...

1 Answer

Crafsman 25cc weedwacker won't stay running


You probably have a bad hose or a bad hose connection that is sucking mostly air instead of delivering full fuel to the carburetor!

Apr 19, 2017 | Craftsman 25cc Gas Line Trimmer

1 Answer

My craftsman weedwacker starts on full choke then at half choke it still runs but i have to really rev it and then when i move choke to off it dies


This is fuel starvation, start with easy things first, replace the fuel filter in the tank, check the condition of the fuel hoses up to the carb for splits, cracks or leakage, replace if required

Jul 03, 2012 | Garden

1 Answer

Craftsman weed wacker will start and run


Are you sure you have the right fuel mixture? Many of these require 2 Cycle oil to be added to the gas. If fuel is right, you may have a vacuum leak at the carb (or crack in base where it mounts to the engine). My weedwacker needed to be run on half choke for about 10 min before it got hot enough to run with choke off.

Apr 29, 2012 | Craftsman Weed Wacker Lawn Edgers

2 Answers

Manual for a craftsman weedwacker model 31679108


Trimmer Starts but stall out as soon as throttle is used and choke turns off. if I hold the throttle and pull the choke it runs but will stall as soon as choke is let go.

Jan 31, 2011 | Craftsman 27cc 2 Cycle Crank Straight...

1 Answer

It starts but in choke and when i turn it to start it turns off


Try keeping it at half choke for long enough time to completely warm up. Once you have warmed it up, put it on "run". If it still dies out, get back to FIXYA. Good luck...Lee

Nov 24, 2009 | Craftsman 25cc Gas Line Trimmer

1 Answer

Ryobi SS30 trimmer starts fine and runs at when in full choke position to about half choke position. But when I put the choke lever to the full run position, it stalls out. Ryobi ss30 same problem of...


You need to rebuild the carburetor. You will need to go to an outdoor power & equipment store of some kind to get a carburetor kit for your specific trimmer. It will come with various gaskets, (some of which you won't use), a needle valve, and a small screen that goes in the carb. Replace all old parts with new. New primer bulb is sold seperately. When you have the carb. apart, you will also need to clean the small ports with a Den Tek Brush (used for cleaning teeth). Use carb. cleaner when cleaning.

Jim

May 29, 2009 | Ryobi Garden

Not finding what you are looking for?
Poulan/Weed Eater No. 5000p 952711612 Pole Pruner Attachment Logo

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Poulan Garden Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Phil Walker
Phil Walker

Level 3 Expert

605 Answers

Are you a Poulan Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...