Question about HP LaserJet 1020 Printer

2 Answers

SUPPLY STATUS i am a cartridge remanufacturer and i cannot check the supplies status of hp lserjet 1020..anyone can help me . Than you and more power to all GURU'S

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert
  • 127 Answers

Printing a Supplies Status page in Windows
Use the following steps to print a Supplies Status page from a computer running Microsoft Windows.
1.Make sure that the printer is idle and the Ready light is on.
2.Load the plain white paper in the input tray.
3.Open the product Printing Preferences dialog box.
•Windows XP
Click Start , click Printers and Faxes , right-click your product, and then click Properties .
In the General section, click Printing Preferences .
•Windows Vista:
Click the Windows icon, click Control Panel , click Hardware and Sound , click Printer , right-click your product, and then click Printing Preferences .
•Windows 7:
Click the Windows icon, click Control Panel , double-click Printers and Devices , right-click your product, and then click Printing Preferences .
4.Click the Services tab.
5.Select Supplies Status Page from the Print Information Pages drop-down menu.
6.Click Print . The Supplies Status page prints
or you can also
Press and HOLD the GO Button for 6 to 8 seconds and release and a configuration Page will print out with the printer information

Posted on May 03, 2014

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Director Badge:

    Uploaded 100 video answers.

  • Master
  • 1,751 Answers

You cann't
just open tha cartridge and mesure how much toner has left inside
after removing the fill cup




SUPPLY STATUS - utube.png You-Tube video "iMiTopIVMxM" placeholder (do not delete) utube.png


if i help you pls vote

Posted on Oct 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

CHECKING THE INK LEVEL


Hello,
to check the toner level just press the button and wait the second light(orange) to turn On and then release the button. The printer will print two pages one with configuration and one with the supply status of the toner cartridge

Dec 26, 2015 | HP LaserJet 1300 Printer

1 Answer

Only black white


Thanks for questioning, pl don't post shot cut questions,your inputs are more valuable for us to give straight away trouble shooting..>Check all cartridges are fully loaded?>Before any body attempted for trouble shoot?>Are you checked for supply status?> Are you performed color calibration?**** Do color calibration (go to menu,system set up,quality,color calibration,calibrate now)Take supply status print out(go to menu,scroll to reports,scroll to supply status, enter in to for print)check all colors are printed are not? If printer take print out from system or print demo page from printer menu.. check print quality...and color calibration..****Remove supplies.. observe while closing the door right side in the supply bank supply contacts engaging or not.(while closing the front door the 'bios voltage contact leavers' engages with the cartridge contacts for passing the voltage in to the cartridge for charging,see the attached snap shot)if these are broken,no contacts or not properly driving by the mechanism, results no print.. check for these contacts...*** alignment disturbed, its major issue users cannot perform this activity..submit in service center for this major issue.


If yes.. Perform color calibration... 1_9_2012_3_23_58_am.jpg

Jan 08, 2012 | HP Color LaserJet 2600n Printer

1 Answer

Says "replace supply using black only" yet all


Refix connector J127 on dc, clean the supply memory contact,switch on the machine remove all supplies, install one by one, check the recognition of supply status, missing all? replace DC controller, only black missing?Replace with another one,check, remain same, observe cartridge seated properly? compare with another cartridge feels difference? check the supply memory properly connecting to the contacts?..any breakage in corosol unit?..replace the corosol..

Oct 05, 2011 | HP LaserJet 2820 Printer

1 Answer

My HP Laserjet 2840 is showing "replace supplies" in the display. There are 5 box/cylendar's that appear in the display and the last one has a solid black box box in it. I was able to go thru...


Thank you for contacting FixYa with your printer inquiry.
The low ink could definitely be the problem thats prompting the error. To begin troubleshooting print the supply status page and confirm the state of the various supplies. Follow the steps below:
Supplies Status page The Supplies Status page lists the remaining life of the HP print cartridges and the HP imaging drums. It also lists the estimated pages remaining, number of pages printed, and other supplies information. You can print a Supplies Status page from the device or the HP Toolbox. To print from the device, complete the following steps. 1. On the control panel menu, press MENU. 2. Use the button to select Reports, and then press ENTER 3. Use the button to select Supplies Status, and then press ENTER. Note Supplies information is also available through the HP Toolbox.
This page illustrates conditions of consumables for Toner Cartridges, Image Drums, Image Transfer Kits, and Fuser Kits. It also provides ordering information and methods for disposing of or recycling used supplies.
Supplies information is also available through the HP Toolbox.
Areas of Supply Status Page: 1. Print-cartridge area. This area contains a section for each of the print cartridges and provides information about HP print cartridges. This information includes the part number for each print cartridge, whether each print cartridge is low, and the life remaining for each print cartridge expressed as a percentage, as a graphic, and as the estimated number of pages remaining. This information might not be provided for non- HP supplies. In some cases, if a non-HP supply is installed, an alert message appears instead. 2. Imaging-drum area. This area contains the same information for the imaging drum that the print-cartridge area provides for the print cartridges. 3. Warranty Note. This section contains information about how the device warranty is affected when you use non-HP supplies. It also requests that you call the HP fraud hotline if a supply that is being detected as a non-HP supply was sold to you as a genuine HP supply. (See HP fraud hotline.) 4. Ordering Information. This section contains basic information about how to order new HP supplies. See Checking status and ordering supplies. 5. Recycling Information. This section contains a link to the website that you can visit for information about recycling. See Replacing and recycling supplies.
The product Support Manual is available from the below link:
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c00341096/c00341096.pdf
If you have further questions just add comment to this link and we will gladly provide additional information and support.
Kind regards,
TF

Jun 08, 2011 | HP LaserJet 2840 Printer

1 Answer

HP color laserjet 1600 wonte printe new toner color.


The supply status report is based on what the kill chip is reporting to the printer. If that particular color is not printing then it is likely that current is not flowing though a particular component in the cartridge. I would return the cartridge and get a replacement.

Feb 02, 2010 | HP Office Equipment & Supplies

1 Answer

How do I check current ink levels in cartridges in my HP Laser Jet 3500


I have an hp 3500 printer myself...simpley print out a supplies status page.
on the control panel go to information than scroll thru that until you see supply status page.. i'm not near my machine now.. but take a little time going thru the menus you'll see supplies status page..
i'm using my hp 3500 as a parts machine..so I don't need it.
would you like to purchase the old fuser/transfer belt toner cartridge for realy cheap...i live in PA if you are close..

Jan 06, 2010 | HP Color LaserJet 3500 Printer

1 Answer

Replaced black toner..now printer won't print any


In this case, actually it is not the Black toner that got depleted. Here the message being displayed indicate that one of the color Toner supply need to be replaced as it got depleted and currently the printer is printing in Black and white using the Black toner cartridge.

in this case, to troubleshoot these issues please try performing the following and check for the results.

* 1. Check for the level of the toner cartridges:

a) Check from the HP Toolbox application. Here are the steps to be performed from your PC:

* Access the Toolbox software.
* Select the Status tab.
* Select the Device status option.

Here you can check for the supplies status in terms of the % remaining for each toner cartridges.

b) By checking the supplies status from the printer control panel display.

On the printer display when printer is in Ready mode the supplies status can be checked from the supplies level indicator. Each toner cartridge and the Imaging drum level will be indicated by a bar which varies according to the level of the supplies present.

c) Print the supplies status page from the printer.

* On the printer control panel menu, press Menu .
* Use the (Right Arrow) button to select Reports, and then press Enter .
* Use the (Right Arrow) button to select Supplies Status, and then press Enter .

If any of the color toner cartridges and the Imaging drum have a low supply level replace them with genuine HP print cartridges.

The part numbers of the consumables are as follows:

* Black print cartridge - Q3960A
* Cyan print cartridge - Q3971A
* Magenta print cartridge - Q3973A
* Yellow print cartridge - Q3972A
* Imaging Drum - Q3964A

Sep 23, 2009 | HP LaserJet 2840 Printer

2 Answers

Printer says print cartridge not supported


Check out the exact no.. and model cartridge install in the printer..
Power off printer, Remove it once, clean its nozzle and contact strip.. then also the contact of printer.. at perinter rack.
Replug the printer from PC and then check it once, let me know the status.

Oct 20, 2008 | Office Equipment & Supplies

2 Answers

Hp 2840


The machine is telling you that there is something wrong with one of your toner cartridges. If you recently installed a remanufactured cartidge the builder didn't replace the smartchip on the nose. If your using OEM (HP) orginal cartridges you may have got a power surge that has knocked out the memory on the toner cartridge.

Try to bypass the error. Attempt to print a "Supply Status" page from the printer. It will tell you exactly which one is at fault.

Here's a link for a free service manual for the printer that could also be of some assistance.
http://www.feedroller.com/Store/Service%20Manual/Color%20LaserJet%202820,%202830,%202840%20Parts,%20Service%20Manual.pdf

Hope that helps you. If so hit me with a FIXYA! Thanks :)

Sep 25, 2008 | HP LaserJet 2820 Printer

Not finding what you are looking for?
HP LaserJet 1020 Printer Logo

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...