Question about E-Machines Bestec ATX-300-12E Rev. D 300w E-Machine GTW Power Supply Part 100929 (ATX30012E) Power Supply

1 Answer

Emachines w3507 power

A friend gave me a chance to try to fix their emachines w3507 power problem. they had a storm one night. woke up the next morning and the computer was off. I tried all the obvious troubleshooting techniques first (i.e., monitor, power outlet, etc....). I even tried holding power button down for a second for a power offload. There was a dull blinking orangeish indicator light on the front of the tower "ePower Button". Inside the tower, a tiny light green LED above a circuit labled "SPDIF 1" or something on the board was blinking. ---- I know the hard drive is fine because I took it out, put in another computer and it booted up fine. I tried putting another computer's good power supply unit in defective tower, and the only changes I noticed was that the tiny light green LED on the board went from blinking to solid and so did the orangeish light on the front. I put original power supply back in defective tower and both LED's are continuing to stay solid. In both power supply configurations named above, there was no fan or other indications of power other than the mentioned LED's. Does this mean that it's probably the motherboard, the power supply unit, or both?? Please give me whatever useful(or not) input you may have on this......absolutely anything will help and be greatly appreciated.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Expert
  • 257 Answers

Detarch all accessories or hardware connected to the system , then bring out the power pack itself out completely look for a soldering led to test the functionality of the power pack itself if it rotates the fan of its pack by looping the first hole to the third hole cable in the power pack connector that will head into the motherboard. therefore, check the mother board if there is any damage on it like some component if all this is false . then plug the power pack to the outlet and fix the connector of the power pack to the motherboard after detaching both cd drive , floopy disk drive leaving the hard disk and the memory . then change the memory card and press on the system there should be a solution from all this . the problem should be from the Memory not to be able to start up the system but go through those process i have given you before concluding it was the memory ok....


kindly rate this solution......

Posted on May 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to play combatarms on emachine w3507


Here is the Minimum Requirment to play the game. I guess you need a Graphic Card to play the game properly.
REQUIREMENTS MINIMUM RECOMMENDED OS Windows 2000 Windows XP or better CPU Pentium 3 - 1GHz+ Pentium 4 - 2.4GHz+ MEMORY 256Mb RAM 512Mb RAM VIDEO CARD GeForce 2 MX GeForce FX 5600 or better DIRECT X Version 9.0C or later Version 9.0C or later HARD DISK SPACE 2.0 Gb 2.0 Gb INTERNET CONNECTION Cable/DSL



Cable/DSL or better

Aug 04, 2012 | E-Machines Computers & Internet

1 Answer

I have a Storm 9530. One evening I plugged my phone into my wall charger (not computer) to charge and when I woke up the next morning... low and behold the infamous battery with red line showed on the...


It could be the charger, the phone's power interface, or your battery. When you plug the phone in to charge it, does it recognize the charger and show the lightning bolt symbol for charging?

If you use your computer's USB port to charge it instead of the wall charger, does it act any differently?

Aug 16, 2010 | Cell Phones

1 Answer

I shut down my desktop properly that night.i woke


Hello,

First use the following steps:

Turn off the system and disconnect power cables.
Press and hold the power button for 30 seconds
Reconnect power cables and try to turn it on.

If it remains same, the next step will be to turn off the system,
Disconnect power cables
Open the case and re-seat memory modules.

If you have more than one modules installed, test the system with a single module at a time.


Thanks


Feb 19, 2010 | Acer Computers & Internet

1 Answer

I need recovery disk for a emachine w3507


You can purchase recovery software specific for your machine (you will need your computer's serial number) here:

https://secure.tx.acer.com/RCDB/Main.aspx?brand=emachines

I believe it is around $20, plus shipping costs.

Hope this helps.

Feb 01, 2010 | eMachines W3507 PC Desktop

1 Answer

Colored vertical lines on monitor


Have you unplugged the power cord to the LCD? Let it sit for a minute, then try it. ALWAYS buy a UPS and plug any computer devices into it. Doesn't have to be big, a $50 unit will protect it from dangerous voltage surges.

Jul 24, 2009 | Dell E171FPb 17" Flat Panel LCD Monitor

3 Answers

Crashing sound on Protron 32 TV


no sound, everything was working fine the night before. woke up the next morning, and turned the tv on, and there was no sound at all. nothing from the TV, DVD, and nothing from the Computer. Please help. curtisw_1999@yahoo.com.

Dec 26, 2007 | Protron PLTV-32 Television

Not finding what you are looking for?
E-Machines Bestec ATX-300-12E Rev. D 300w E-Machine GTW Power Supply Part 100929 (ATX30012E) Power Supply Logo

303 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...