Question about Philips 42FD9932 42 in. Plasma Television

1 Answer

Hi my philps 42 inch tv just stays on with a blue light but no picture and makes a clicking noice when switched on cheers matt

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Philips Master
  • 12,061 Answers

This is a classic switchmode power supply, shutting down to avoid a fire, explosion, or both. This set had developed a problem, that is so severe that the set must be shut down, This set should be removed from the Power, and in my professional recommendation, you should get a "Quote" for repair, from, an Akai, Approved Service Center, this point is very important for a good result, Always contact, their local, "Head Office" Now, when you get the information you want, then you can decide as to repair of replacement. The reason we want an approved agent, is that way, all the engineers are trained on their own brand sets, they have seen almost all faults, and will get the job done quicker, and for less cost, and usually have parts on hand, also sometimes, there has been a service bulletin in issued and the repair may be subsided or even free.

Posted on May 05, 2010

Testimonial: "hi thanks very much will get it checked out matt"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fixing a Philps 42PFL7432D/37 Flat Screen LCD TV that isn't turning on.


The video driver board is likely at fault here. Test it per the factory repair manual.

Sep 12, 2016 | Televison & Video

1 Answer

Philips 42 inch flat screen TV, making a 'tweeting' sound and no picture


Power supply has failed. The blue LED merely confirms that power is getting to the TV.

Oct 03, 2012 | Philips 42pf9966 42-inch Hd-ready Flat...

1 Answer

I have a 42 inch Hitachi plasma tv that is making a very loud static noice coming from the internal speakers. It stays at a contstant very loud volume unless I completly mute the tv or turn the volum


Based on what you have tried if a buzz or loud static via the speakers you have something wrong in the audio output circuit of the set--problem here is that circuit may be part of the Main board that processes all signal---a look inside---following the speaker leads back would lead you to that board.

A simple thing to do to narrow it a little (you may have done this) is with sound all the way off put your ear to the internal speaker--hear anything at all like a deep hum?

Depending on age of set and cost of the board likely bad it may or may not be a do it yourself repair.

SD TECH

Apr 26, 2012 | Hitachi P42H401 42 in. Plasma HDTV

2 Answers

42 inch LG Plasma TV - Lost picture


This is almost certainly the device that sends electricity to the the plasma in the panel after failing. Bring to your local repair shop and expect to pay 300-400 parts and 100-200 labour.

Cheers,
Stephen

Apr 28, 2009 | LG 50PC1DRA 50 in. Plasma Television

1 Answer

My tv won"t turn on.


1. Hold [menu] and [vol-] button on the side of the TV
2. while holding these, press the [power] button on the side of TV (NOT remote)
3. blue light comes ON and stays ON
4. wait 10 seconds then let go of [menu] and [vol-]
5. wait another 30 seconds and some type of picture should appear

I think this is right. I got it from the JVC call centers guys so sorry if I missed or messed up a step.

Apr 07, 2009 | JVC LT-42X579 42 in. LCD TV

1 Answer

TV switch off randomly


It is a Rely in the Power Supply. Need to have it changed out. Cheap part.

Dec 29, 2007 | Samsung HP-R4262 42 in. Plasma Television

1 Answer

42 inch LG Plasma TV - Lost picture


ysus pcb that supplies voltage to the panel is faulty

Dec 14, 2007 | LG 42PX4DV 42 in. EDTV-Ready Plasma...

1 Answer

42 inch LG Plasma TV - Lost picture


sounds like it may be a software upgrade

Oct 16, 2007 | LG 50PX4DR 50 in. Plasma TV

4 Answers

JVC 42 INCH PLASMA POWER LIGHT BLINKING ONLY NO PICTURE


no kidding? what is the problem so prevelant in this unit? obvious design flaw.

Dec 19, 2006 | JVC PD-42WX84 42 in. HD-Ready Plasma...

Not finding what you are looking for?
Philips 42FD9932 42 in. Plasma Television Logo

501 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74468 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...