Question about Gateway Wireless-B Router (wbr-100)

1 Answer

Wireless-B Router (wbr-100): how do i reset my security setting on my d link...

How do i reset my security setting on my d link

Posted by Anonymous on

  • Chaz May 11, 2010

    type 192.168.1.1 into your browser address bar. You should have the browsers admin page come up. Type in the user name and password (admin for both by default). Go to the set up page then wireless. All your wireless security settings are there. Here's your manual if you've misplaced it;http://support.gateway.com/s/Manuals/Des... Regards Zahc

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,260 Answers

Is there any computer connected to the router ?
If not then you will need to connect the computer to the router.
Do not change any wireless settings on the router with the wireless computer.
you will need to connect the computer to the router with the Ethernet cable.
check the IP address of the computer.
open the router set up page of the router.
Here you can change the wireless settings of the router.
Now once you change the network anme and security on the router, you will need to connect to the wireless network on your wireless computers.
Click Here for step by step instructions

Posted on May 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a D-Link WBR-1310 router. It worked fine on Thursday evening. Now my laptop and my TIVO cannot even detect the router. I have tried resetting it and even unplugging the router and plugging it...


I suggest you RESET the D-Link back to the default setting and configure the wireless settings again.
To reset the D-Link back to the default settings -
Press and hold the RESET button at the back of the router with the power ONuntil the LEDs flash at the time the release the RESET button.
Connect a LAN cable from the D-Link to your laptop/computer's LAN port, openthe browser on your laptop/computer and enter the D-Link's configuration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Jun 18, 2011 | D-Link 802.11g Wireless Router WBR-1310...

2 Answers

I am unable to get my wii to connect to my wireless router WBR 1310 - or even my laptop


D links are normally pretty user friendly. Try resetting the router itself. grab a paperclip or something small, and hold down the reset button in the back of the router for 10 sec. or until it resets by itself. once this is done your router should be restored back to default settings, aka. like when you first took it out of the box.

Feb 28, 2011 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

Is there a way to set up my wbr 1310 without the installation cd


Yes you can - If you do not know the login and password -
You can reset the D-Link back to the factory defaults by - power off the D-Link, press and hold the RESET button on the back of the router, then power up the router. Hold the RESET button for 5 secs and release the RESET button or until the LEDs flash together.
Connect a LAN cable from the D-Link to the LAN port on your computer and open a browser. Enter the D-Link's configuration URL http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter)
You can now configure the wireless settings, eg. SSID and encryption etc.

To secure your wireless network from unauthorized access, please cick on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security
.

Nov 18, 2010 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

How do I secure my D-Link WBR-1310 wireless router?


You can follow these steps in enabling wireless security on your router and do this steps using a computer wired to the router since once you save the settings your wireless network will be secure.<br /><br />1) Open the internet browser and type the address 192.168.0.1 to login to the router. The default username is "admin" and leave the password box empty.<br />2) Click "Wireless Settings" on the left side.<br />3) Select the Security Mode ,Enable WEP Security.<br />4) Select the Authentication ,Shared Key.<br />5) Select the WEP Encryption , either 64-bit or 128-bit.<br />6) Select the Key Type ,HEX (only A-F and 0-9 number allowed) or ASCII (all number and character allowed).<br />7) Enter a WEP key as your security password to login to your wireless later.<br />8) Press Save Settings to save all settings changed. Reboot the router.<br /><br />

Aug 24, 2010 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

How do i change my password to be protected while on the intetnet


Log onto your router (google "wbr-100 setup" if you dont know how to do this )
Go to wireless / security and change or set your security and password)
Here is your manual http://support.gateway.com/s/Manuals/Desktops/8509439.pdf

Aug 13, 2010 | Gateway Wireless-B Router (wbr-100)

1 Answer

How can i secure network


By going to the security setting in the router and assigning a WAP/WEP "Key" this will then enable security. Please consult your manual for how to do this.

ftp://ftp10.dlink.com/pdfs/products/WBR-1310/WBR-1310_ds.pdf
manual above

Aug 09, 2010 | D-Link 802.11g Wireless Router WBR-1310...

2 Answers

My WBR-1310 doesn't do wireless to my laptop.


theres a couple of version of this router http://www.dlink.com/products/default.aspx?pid=WBR-1310&tab=3 I'm using the manual from here http://www.dlink.com/products/?tab=3&pid=WBR-1310&rev=WBR-1310
on a working PC download and install this program http://www.xirrus.com/library/wifitools.php this will detect all the wireless signals being broadcast - see if the router is actually broadcasting - if it is detected on your PC then it may be that 1) the firewall is blocking access or 2) the security code is entered wrong - -log into the router and remove the wireless security and see if you can now detect

Mar 18, 2010 | D-Link 802.11g Wireless Router WBR-1310...

2 Answers

I have a network set up with this router WBR-1310 version 1.1 . When my son came over with his laptop he could not get it to connect, and now I have been trying to connect another laptop that was not set...


The WPA or WEP encryption key is configured/enabled in the router's wireless settings. The router's SSID, WPA or WEP etc. needs to be configured in the laptop's wireless card settings fir the laptop's to communicate with the wireless router.
Please click on this link for information on how to secure your wireless network, configure the wireless router and configure the wireless card in the laptops and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

Feb 19, 2010 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

How to secure connection on WBR-1310 d link


To secure the wireless network, you will need to access the router set up.
Is there any computer connected to the router ?
If not then you will need to connect the router to the computer .
Then check the IP address of the computer and open the router set up.
Click Here for step by step solution on how to secure the network

Nov 21, 2009 | D-Link 802.11g Wireless Router WBR-1310...

6 Answers

How do I secure my dlink wireless connection?


Type 192.168.0.1 (you can type the router address if you have changed) and enter on browser's addressbar. Router's interface will appear.
Click on SETUP and Click on the WIRELESS SETTINGS at left side. on the page you will see the option of WIRELESS SECURITY by drop down menu you can choose the Security mode that you wish. here is the link for the emulator
http://support.dlink.com/emulators/wbr1310_revB/wireless.htm

Please post your question if you need further assistance
Good Luck

Jan 19, 2008 | D-Link 802.11g Wireless Router WBR-1310...

Not finding what you are looking for?
Gateway Wireless-B Router (wbr-100) Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gateway Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a Gateway Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...