Question about Cell Phones

1 Answer

Hi... I have a diguim appliance aa50, with four FXO and four FXs can I implement Skybe for asterisk to it, or Fax for asterisk to it. thnaks?

Posted by on

  • bits2009 May 05, 2010

    I need for this specific device, diguim aa50



    is there anyway to have fax for asterisk and also skype for asterisk

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,284 Answers

Hi, it's better you to use skype for asterisk on the Diguim-Developed Asterisk and you can get more information on this link..

http://www.digium.com/en/mediacenter/viewpress/Digium-and-Skype-Collaborate-to-Bring-Skype-to-Business-Phone-Systems

Take care

Posted on May 05, 2010

  • Shehu Pro
    Shehu Pro May 05, 2010

    Hi, am not sure it works for this particular type, but to be on a safer side, contact Technical Support of Diguim to get clarification +1 256 428 6000

    Take care


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot reset to factory default


Are you unplugging ethernet cable from MP? make sure you do otherwise factory reset will not work.

May 22, 2012 | AudioCodes MP-114-FXO - 0 FXS Ports, 4 FXO...

1 Answer

Can I reprogram a rt31p2 router from vonage


No there is no way to do this, no software to do the job exists.

Dec 29, 2011 | AudioCodes MediaPack MP-114 FXS and FXO...

1 Answer

I have a 1 port fxs voip voice modem, i have connected it and it is working. but the problem is that any time i power off my pc, i will have to reprogram it. can any body help me please?


the pc and ata are not reliant on each other. ensure the ata is plugged directly into you router.
unplug the lan lead and do a factory reset the ata via the ivr. once the unit has restarted plug in the lan and get the ip address via the ivr. set up the ata, rebooting after each page update (do not update more than 1 page before rebooting the ata).
you should now have a functioning ata and should be able to turn off your pc without issue.
if the ata now loses its settings then it is probably faulty (I've had a couple of ht386s go faulty in a similar way).

Apr 03, 2011 | Gateway 1-Port FXS/FXO VOIP (MTSMVP130)

1 Answer

Hi i want connect a 7730 phone call to fxs port dvg 5008 .. what settings should i do?


A 7730 is a Panasonic system phone. It requires a Pana system to operate, so I'm confused as to what you're asking. If the phone call is INTO a 7730 phone and you want it to a phone on the DVG, you will need something to transport it, like an FXO circuit tied to the Panasonic's station ports. If the phone call is FROM the DVG and you want to answer it on a 7730, you plug the FXS ports into the CO ports of the Pana Key Service Unit that the 7730 is plugged into.

Hope it helps.

Carl

Mar 13, 2011 | Panasonic KX-T7730 Corded Phone

1 Answer

My mp-114 dials 5252 when I access a line. Do you


You may have enabled the "auto dialing" feature and may have that destination configured. Please post your INI config file and I will be able to assist you further.

Aug 07, 2009 | AudioCodes MediaPack MP-114 FXS and FXO...

1 Answer

Way to reset mp-114 audio code to factory settings and configure


Unplug the network cable and hold in the RESET button (small hole on back of unit) with a paperclip for 6 - 10 seconds. The default IP is 10.1.10.10 sm 255.255.0.0 if it is an FXS
10.1.10.11 sm 255.255.0.0 if it is an FXO

May 16, 2009 | AudioCodes MediaPack MP-114 FXS

1 Answer

ACT/SDM 9350 MULTIPLEXOR


I have 1 ;)
a netperformer SDM-9350
I realy dont know its specs but you can contact me at glenns@aapt.net.au

Jun 17, 2008 | Gateway ACT Refurbished LUCENT...

1 Answer

AFTER CALLER HANGED UP PHONE, THE REMOTE SITE STILL RINGING


A long standing problem with FXO's and FXS connections is the latency in Voip and signaling. That is there is a delay from the time sent to time received. There should be software settings to adjust the delay. I would refer back to the manufacture of the FXO card and see if there are any software patches or upgrades. This is a software problem.

Jan 18, 2007 | Gateway ACT Refurbished LUCENT...

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

William Alequin

Level 3 Expert

928 Answers

Are you a Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...