Question about Chi Mei Corporation 1701MD Monitor

2 Answers

My computer turns off and cant turn on again?...does it need a repair?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 921 Answers

Make sure it is plugged into a live power outlet.
If the outlet is live then the most likely problem with the computer is that the power supply failed.

In answer to your question, "Yes, take it to a professional".

Good luck!

Posted on May 05, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,354 Answers

In this isue you have a proble ether wondows or prosesser FAN

if your windows is opening then after some time if it's gos off it meance u have problem with your Prosesser FAN
or
if it's go off when you starts you computer without opning the windows then u have problem with OS

Posted on May 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Well I was on my computer trying to finish my paper due for school and I saved my paper to my computer first then I wanted to plug in my usb so that I could save it to my usb and take it to school the next...


Sounds like there may have been a virus on the USB drive..
OR when you inserted the USB drive it shorted the usb port.
Can you boot into safe mode (F8)?
Can you get a windows disk to boot?
Please get back intouch if you can boot up either way.
If you cant, you may need to be looking for a repair shop

Aug 02, 2010 | Gateway GT5252 PC Desktop

1 Answer

I went to a site because i clicked something and i cant get out


Rebooting the computer just means to turn it off, and then back on again...when a computer turns on, it "boots up". It's just an expression that people use for the process of the computer turning on and initializing all it's processes and programs. Try turning the computer off, and then on again. That should fix things.

Apr 06, 2010 | Apple OSX 10.3 for Unix, Mac

1 Answer

What can i do to get out of the screen or reboot altogether as even when i press alt+ctr+del nothing happens when i turn it off and on again the same thing comes up and i cant do anything, how can i fix...


Perform power drain ( remove all the accesories connected including battery and power adapter) then connect the power adapter only and turn on the computer.

It is a posible issue with the OS of your computer, it needs to be repaired or reload.

Mar 27, 2010 | ASUS Eee PC 1000H Laptop

1 Answer

My ep-8khal motherboard wont turn on!


first turn off your pc, open the right side panel of your pc and locate the memory card. after locating, pull it out and clean it with a pencil eraser, if you have separate motherboard, clean it also. and then turn your computer on, if the problem goes again, the faulty part might be your computer memory or the separate video card, if you have one.

Note: if you cant' do one of these tips.just have your computer repair by a professional comp. technician.

Good luck!

Jan 15, 2009 | EPoX EP-8K7A Motherboard

1 Answer

Can not turn on mp3 was working and i don't know how to charge


You have to hold the power button in for 3-5 seconds for it to turn on (make sure it is disconnected from the computer).

If your problem is deeper than this:
Make sure the hold/lock switch is not activated.
If it is not, then try a different USB port on your computer.

If you get the same result:
Triple Reset for Philips’ GoGear:

Disconnect the Go Gear from computer. Press the reset pinhole until the player turns off. Hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard. If this pop-up does not appear, reset the player again WHILE connected to the computer. Open the Philips Device Manager, and go to Repair Tab. Reset the player one more time while connected to computer. Follow the repair instructions.

After repair is complete, upgrade the firmware for this player. Will erase all the songs, but you should be good to go again.

-Tha Mp3 Doctor

Dec 25, 2008 | Philips SA3025/37 Flash MP3 Player

1 Answer

I am not sure what happened but my daughter was pressing buttons and now my mp3 player is frozen and I cant even charge it. I cant turn it off and my pc doesnt even recognize it when i turn it on. What do...


Disconnect the Go Gear from computer. Press the reset pinhole until the player turns off. Hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard. If this pop-up does not appear, reset the player again WHILE connected to the computer. Open the Philips Device Manager, and go to Repair Tab. Reset the player one more time while connected to computer. Follow the repair instructions.

-Tha Mp3 Doctor

Dec 16, 2008 | Philips GoGear SA3125/37 MP3 Player

1 Answer

Phillips gogear sa6185


Triple Reset for Philips’ GoGear:

Disconnect the Go Gear from computer. Press the reset pinhole until the player turns off. Hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard. If this pop-up does not appear, reset the player again WHILE connected to the computer. Open the Philips Device Manager, and go to Repair Tab. Reset the player one more time while connected to computer. Follow the repair instructions.

After repair is complete, upgrade the firmware for this player. Will erase all the songs, but you should be good to go again.

-Tha Mp3 Doctor

Oct 24, 2008 | Philips GoGear HDD075/17 MP3 Player

1 Answer

Go gear wont turn on


Make sure the hold/lock is not engaged first.

Triple Reset for Philips’ GoGear:

Disconnect the Go Gear from computer. Press the reset pinhole until the player turns off. Hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard. If this pop-up does not appear, reset the player again WHILE connected to the computer. Open the Philips Device Manager, and go to Repair Tab. Reset the player one more time while connected to computer. Follow the repair instructions.

After repair is complete, upgrade the firmware for this player. Will erase all the songs, but you should be good to go again.

-Tha Mp3 Doctor

Oct 05, 2008 | Philips GoGear HDD075/17 MP3 Player

1 Answer

I cant get my mouse pad to work after turning it off in control panel. Im on windows vista and on a lap top. Curser wont work so cant go back in to turn it on again.


Hold the Alt key and press F4. Press Enter to shut down the computer.

Once it's shut down, press the POWER button on the computer's system box to turn the computer on again and reset it back to normal.

Hope this works.

Jul 20, 2008 | Acer Computers & Internet

Not finding what you are looking for?
Chi Mei Corporation 1701MD Monitor Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chi Mei Corporation Computers & Internet Experts

Roshan Rijal
Roshan Rijal

Level 2 Expert

361 Answers

ray gallant

Level 3 Expert

41407 Answers

Steven's...
Steven's...

Level 3 Expert

426 Answers

Are you a Chi Mei Corporation Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...