Question about Computers & Internet

1 Answer

Printer will not stop.

After asking for 3 pictures, color, the printer refused to stop even after i manuualy stopped the printer, i have disconnected the entire system but to no avail, i tied it a moment ag and with the same results it wants to print the same picture , thank you , it, driving me crazy.dupster1

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

BECAUSE I DID THE DREADED MISTAKE OF PUTTING THE MODE INTO A , "ALL" INSTEAD OF 1 OR 2, ONCE I HAD MY BRAIN FOCUSED ON WHAT COULD BE WRONG , BAM BAM THE LITE CAME ON AND I BROUGHT UP THE PRINTER INFO , AND CORRECTED THE PROBLEM ,
I SEEM TO BE GETTING DIFFERENT PRICES TO HAVE JOINED YOUR SOLUTION FINDING ORG., COULD U RESPOND AS TO WHAT MY ACTUAL COST WAS ON MY CREDIT CARD.THANK YOU , DUPSTER 1

Posted on Mar 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I connect printer when everything is physically connected properly


1.Disconnect USB cable & reconnect it.
2.Disconnect Power cable & reconnect it.
3.Check if the driver of Z1420 is properly installed?

Apr 01, 2008 | Computers & Internet

1 Answer

I requested 3 prints, [color] i had to stop printer manualy, as it would not stop . i activated it again and it resumed making the same pictures,i have deactivated my entire system but to no avail,i just...


hmm..interesting..that usually happens when the image size is larger than the print area the printer handles..check your scaling on your photo application, so that the image is NOT larger than your printable area..

Mar 26, 2008 | Computers & Internet

1 Answer

I have a canon mp460 printer that i have just re'filled and i am still gettin the 'ink running low' message on screen. how do i resolve this problem?


On the maintanance screen is there a "Ink counter Rest" tab. It must be clicked on as soon as you put the cart back in.

I also got the following from a website out there:

1) Enter SERVICE MODE by pressing sequentially Menu Copy Scan Copy Copy or Menu Copy Copy Copy Scan (on some models)
2) Select TEST MODE.
3) Press ‘+’ 8 times till ‘Select [8]’ PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.


Hope that fixes it for Ya...

Geno

Mar 27, 2008 | Computers & Internet

1 Answer

Printer will not stop.


yes..that's a good assumption..like that word better?

so, remove the software for printer from computer

turn off printer

go here for new driver set


reinstall drivers

run it

Mar 26, 2008 | Computers & Internet

1 Answer

Each time a new cartrige and alignment is done the print alignment ask to align again and again.


most printers require that the entire print alignment be done before it lets you pass this step. to me, it seems like a huge waste of ink! are you stopping the alignment before it's done? is there enough paper in the printer to complete the task? there are ways to avoid this step, you'll have to check your manual's troubleshooting section to find out how.

Mar 09, 2008 | Computers & Internet

1 Answer

WE HAVE A CANON MP530 COLOR PRINTER. DURING A PRINTING OF LABELS, WE HAD A PAPER JAM, WHICH WAS CLEARED. WE ARE NOW GETTING A MESSAGE "U052" CONCERNING THE PRINT CARTRIDGES, WHICH WE CANNOT...


Pls chk thoroughly the inner parts are clear of any shreds of paper. Blow air thro vacuum cleaner. A small piece of paper sitting on a sensor can create this sort of problem. (For eg, the cartridge stops at both the ends after 'sensing' the end. If paper sticks here, it cant sense and will lead to a crash)

S. Mohan

Mar 07, 2008 | Computers & Internet

1 Answer

BJC 1000 troubles


There might be a problem with Printer Spooling Service. If you are using Windows do the following:

1. Go to start.
2. Choose "Run" and type: services.msc.
3. Press the Enter/Return key on your keyboard.
4. A screen will pop up. Locate the "Print Spooler" service.
5. Doubleclick it, if it has stopped: click Start.
If it is already running, click, Stop, and then Start.
6. Try printing again.

Let me know if this helped you out, please rate.

Greetings,

DarkNeogen

Jan 25, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...