What type of headset can be used with the Skype Phone?

Hi brentcopeman,
U would say yes this is the case. Nearly all mobile phones have a 2.5mm headphone jack up to the newest smartphones and walkmans that have been in production on the last year or 2 some of which use the standard headphone jack size.
I might add that if you have headphones that you like already to buy one of these:
http://www.amazon.com/Headset-Adapter-3-5mm-2-5mm-Converter/dp/B000LMBJMA
That way you can use the headphones you already have and insert them into the phone using the adapter and don't have the added cost of new headphones unnecessarily.
Hope this helps you out.

The Phone and the Line jack are for the dialup modem in the computer. You wont be able to use it for Skype.

1. Unplug and re-plug the usb cable from the base station to your Skype computer.

2. Make sure Skype is running.

3. Re-install the vtech software (you can download it at http://www.vtechphones.com if you need to)

4. When Skype asks if it's ok to let it connect, do that.

Some phones have jack on the side of the phone. If it does not, you will need a standard telephone headset with amplifier. You will need a handset button (634) programmed on the phone. Then in programing Flash 50 button 4 you will need to disable speakerphone. Flash 50 button 18 determines the headset type: 0-is amplified unit plugged into handset cord, 1-is 2.5mm jack on side of phone,

To use handset, press handset button so it is lit, use on off to answer calls with the handset.

Call 1-800-898-6723 x 1 (if outsidethe USA call using SKYPE. It is free to call USA toll free numbers using SKYPE.

The driver is the same for P-500. It is about 14KB in size.

I got mine today from TELEX. It is 01:11 July 29, 2008, Indian Standard Time.

Best regards,
Randy.