Question about Lexmark E232 Laser Printer

1 Answer

What does the fourth light down from the top mean

What does it mean when the fourth light down from the top it is lit up? (or one light up from the bottom)

Posted by on


1 Answer

  • Official Brand Answer
  • 3,344 Answers

That indicates that the printer is having a paper jam error. Here's a link to the Lexmark website which gives you instructions on what to do when having this problem. Read thoroughly. The article may help you prevent this problem from happening in the future. Hope this helps. If you need more assistance, leave a comment and I'll get back to it. Thanks.

Posted on May 05, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Top left light stays on X BOX 360 Live

The light ring on the Xbox 360 console indicates a few things. Like error or controller connection. When the left quarter is lit it means that player 1's controller is connected

Feb 02, 2017 | Top Video Game Consoles & Games

1 Answer

Armacost ribbon lights are lit for 2 days, then die. Why???????

There is a short in that string. Finding it will be tough but can be done with a meter checking every light in the chain until you find the loss point.

Nov 02, 2016 | Armacost Lighting 12 ft. LED Warm Bright...

1 Answer

What does it mean when the vacuum electricity light is on but no power and the ? mark is also lit up

The electricity light means there is powewr to the vacuum.The ? means there is not bag or the vacuum doesn't detect a bag.If so there is a little swich that is pushed down when closing the front cover.Make sure it goes down when closing.It is located where the top of the carboard of the bag top...Chris

Jul 11, 2014 | Electrolux Epic 6500 Vacuum

2 Answers

Hotpoint Aquarius wdl540 wont pump out water

!. Check for water drips/leaks onto the wiring after removing the rear&or the side covers.This may sometimes not be visible to the naked eye -- a torch.

2.Check for loose connections to the pump.If all o k then remove the & test by connecting to the Mains.If it runs switch it off -- do not run it dry for more than a few seconds.If o k then it can only be the main board or timer.

Jan 26, 2014 | Washing Machines

1 Answer

A warning light that is a triangle made up of dots with an arrow pointing down on top of them has lit up. What does this mean?

This is your add toner indicator. It means you need to change out the toner cartridge.
Thank You for using Fixya.

Apr 04, 2011 | Office Equipment & Supplies

2 Answers

The triangle light is lit on the panel. What does

tooner goes to low or paper stucking any where in paper path..check for both ur problem will be resolved

Jul 30, 2010 | HP LaserJet P2015dn Printer

1 Answer

Fourth light from the top is on

This light indicates that you will need to replace the photoconductor unit part number :LEXMARK E232,234,330,332 Photo Conductor - 12A8302 (30K)

May 27, 2010 | Lexmark E232 Laser Printer

1 Answer

Have a 1999 John Deere Dozer 650G LGP series and on the control panel where you crank the engine there are four lights to the left of the key ignition switch about dime size. Starting from left to right...

Check your hydraulic filter,if it has not been replaced in a while the filter may have a restriction allowing the light to illuminate. The red light may be telling you there is not enough flow through the filter to operate safely with out doing damage to the hydarulic system.

Dec 13, 2009 | Garden

1 Answer


There is a safety device that shuts the gas off or nearly off if there is insufficient back pressure, such as can be caused by a leak. Check to insure that all of your new burners are properly seated.

Jul 02, 2009 | Weber Q Grill

1 Answer

Lexmark E250d

I had the same problem today with my printer. All of a sudden, the first and fourth light lit up. I contacted Lexmark and they said my toner cartrigde needed to be replaced.
The problem is caused by the little chip under the cartridge. I replaced the chip with an old one I had on another cartridge and I got the printer to work again.
You can buy a replacement chip from Lexmark or from a jobber selling replacement cartridge or toner refills.
Hope that helps.

Sep 30, 2008 | Lexmark E250dn Laser Printer

Not finding what you are looking for?
Lexmark E232 Laser Printer Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides