Question about Tag Heuer WAF2110.BA0806 Aquaracer Automatic watch

1 Answer

Hi.i just boughta tag heuer grand carrera xx007344.immediately i got home,it stopped working.so,after abit of winding it starta working.but if i just drop for a minute or two,it stops working.even when i'm wearing it,if my hand is still for some minutes,it stops working.what can i do?also,apart from the three buttons on the right side,it has a fourth button on the left side which i dont it's use.so,please i just need some answers.see if u can get the model and explain to me some of it's functions.thanks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,501 Answers

Automatic watches will generally run for 2-3 days before the spring is fully unwound, so you are likely to have bought the watch in the unwound condition.

It can be wound by gently shaking the watch from side to side (for about 100-200 times). This should give it sufficent engergy to operate and thereafter normal use will keep it wound up.

If it stops working when the watch is rotated out of the face up position, then it may be that the watch is faulty. (If the watch has been dropped in transit, it may have been damaged).

If normal operation is not achieved, then send it back to get it repaired under warranty.

Posted on May 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to seconds hand


Hi Johar,
I will advise you to contact your manufacturer to avoid warranty void due to damage during the process of setting it. Try the link below.
Contact Us TAG Heuer

May 09, 2014 | Tag Heuer Grand Carrera Automatic Calibre...

1 Answer

I have had my Grand Carrera for 7 months and I don't always wear it every day. Recently, I noticed the hands quit moving, usually a light shake would restart them. There is also a noise when I move the...


This sounds to me as the Oscillating weight is getting loose and touching the movement. There could be a loose screw as well. That's why your watch is stopping (not enough power to fully auto-wind the spring). There is nothing you can do, I'm afraid, but to show watch to the watchmaker for proper inspection. The longer you'll wear it as it is - the more damage will be done.

Feb 26, 2011 | Tag Heuer Grand Carrera 17 RS CAV511B...

1 Answer

My watch stops very often its tag heuer grand carrera calibre 17 rs2 automatic one what do i need to do for continuous running of my watch


It rather depends what you mean by "very often".

An automatic watch will run for 2-3 days before stoping if it is not used.

These watches thrive on being used and are best used every day.

It could be that your watch needs cleaning (I had one that was like that when I bought it and I had it cleaned and it ran for years after that).

Jan 21, 2011 | Tag Heuer Grand Carrera 17 RS CAV511B...

1 Answer

Hi, My TAG has been in and out of service three times, the hands came off, the winding mechanism stopped working and the tertiary timing hand has come away this week. I wear it for work [in an office]...


I have this same exact watch with the same problem. In November of this year, my watch just stopped with an inability to autowind itself. I'm a little mad because I have babied this watch, while only wearing it on special occasions (10x). What's the problem?

Nov 21, 2010 | Tag Heuer Carrera Auto CV2113.FC6180 Wrist...

1 Answer

I have a Tag Heuer Grand Carrera. It worked perfectly for a year. But now, it doesnt work. When I shake the watch, it starts and then stops again after few minutes. I was told to wind it. But I dont know...


If your watch is "automatic" then would I be right in thinking you took it off for a few days and it stopped?

If this is the case (since most of the Carrera range are automatic, then the spring will have run down and needs re-winding.

You were correct in thinking that shaking it will re- start it but to keep it going you need to shake it gently from side to side for some time. (One supplier quoted 500 times!) be patient and keep wearing it.

Oct 14, 2010 | Tag Heuer Carrera Auto CV2113.FC6180 Wrist...

1 Answer

I have a TAG HEUER Grand Carrera and the second has stopped


Are you aware that these are automatic watches and need to be moved to keep the watch going, kinetic energy winds up the movement which allows it to keep going, if it is left off your wrist and in a drawer or sat stationary it will stop. Shake it violently (without dropping it) and it will restart.

Aug 26, 2009 | Watches

2 Answers

Tag heuer automatic series, how do you start the watch after purchasing?


push the crown in if it is in the adjust position .then shake the watch around the auto mechanism sould start the watch

Aug 23, 2009 | Tag Heuer Automatic Chronograph Series...

1 Answer

Carrera automatic. stops with 8 hours of non wearing


Hi

I hate to be blunt be if it stops after 8 hours of wear, it may need a service! Most watches (particularly automatics which winds constitantly, when being worn).

Take it to your local watchmaker for a assessment? If it's less then 2 years old take it back to your place of purchase with reciepts as most swatch group (rado, longines, and tag etc) have a 2 year international g/t (that what we have here in australia and way, please consult your warranty card for verification!)

Jul 13, 2009 | Tag Heuer Watches

1 Answer

Quickly change date on my Tag Carrera


When yoy pull out the crown you will notice there are two clicks. You have to pull out crown to the first click only and then adjust a date by turning the crown.
Rate me, please.

Mar 13, 2009 | Tag Heuer Carrera Auto CV2113.FC6180 Wrist...

1 Answer

Tag heuer carrera automatic wv211a


Your watch is a automatic. All automatics need to wind-up before being worn at first , or if not worn all the time. Automatics will work with-out being wound ,but will not keep time. Wind your watch at least 50 turns (using the crown) or shake about 150 times , and then try it . Automatics need that back-up power to insure it's accuracy.

Jun 19, 2008 | Tag Heuer cj1110.ba0576 Wristwatch

Not finding what you are looking for?
Tag Heuer WAF2110.BA0806 Aquaracer Automatic watch Logo

1,458 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tag Heuer Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

The Knight
The Knight

Level 3 Expert

74251 Answers

Jimmy Accardi

Level 2 Expert

101 Answers

Are you a Tag Heuer Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...