Question about Philips DVDR3430V DVD Recorder/VCR

1 Answer

Remote control does not work I have put in new batteries

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 69 Answers

Just make sure if you press anything, you see light on the remote control (usually green or red). This has nothing to do with your dvd recorder but having the batteries placed right, or having the remote control not being damaged.

If you see the light, a common mistake here is that your remote control is on the wrong stance. When pointed at the dvd recorder, you need it in dvd stance. On your remote control, you see "TV/VIDEO" "VCR" "DVD" and "SOURCE" on top under your "on/off" button. Make sure you press DVD first, or the DVD will not react on your signals.


If this does not solve it, don't hesitate to tell me.

Posted on May 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

If my battery went dead on my remote do I have to reprogram remote when I put in new battery?


You should not have to reprogram the remote. The programming is stored in Non-volatile ram.

Dec 24, 2014 | Televison & Video

1 Answer

My rmt-05 remote is not working after i put in new batteries


have you checked the polarity one the new batteries you installed? (flip the batttery updside down)

Aug 29, 2014 | Westinghouse RMT-05 TV Remote Control for...

1 Answer

Remote will not work, could it be batteries ?


Just put in new batteries and see if that fixes it. If that does not help, you need a new remote control.

Apr 07, 2014 | Directv RC23 Remote Control

2 Answers

Remote won't work


1) replace the batteries by new one alkalines
2) clean the contacts batteries very wells
3) retight the springs contacts with pliers, for better contacts.
4) try again, reset the code.
5) open the remote control and clean the keypads with contacts cleaner for diryt, dust, and oxide.
6) resolder all points from board rremote
7) if this not work, you must go to the repair shop TV for fix it.
8) the SYSCOM can be defective. remember they send I.R emission.
God bless you
8_30_2012_4_21_13_pm.gif

Aug 30, 2012 | Clarion New Original ARX5470 Remote...

3 Answers

T.v. does not respond to remote control, but does work maually from side buttons


Turn tv on manually.Test the remote control all functions are dead or some functions work other don't?Tries take the remote control parts and clean the inner rubbers buttons between the rubbers insulater and the remote circuitries board and the battery connections + - connections with some rubbing alchahol.Then wait awhile like 20 mins and putting it back together again and putting in new battery in the remote,it might work again.If getting the same result than the remote CPU chip is probally dead,remote control devices are very depended on it CPU chip.Try website like Remotes.com to buy an original remote for the replacement.

Mar 24, 2011 | Vizio 42 in. LCD TV

2 Answers

Cannot turn tv on or off remotely. Tv works fine after turning on manually.


Take the remote control aparts,take some Q tips dips it in with some rubbing alchahol.Clean the remote control PCB board,putting it back together again,wait like 20 mins.Put in new batteries.The remote now should work again.If not it garbage,because it CPU chip is dead.Try website like Remotes.com to buy an exact remote to ur original remote.

Nov 18, 2010 | Quasar VV2007 20 in. Combo

1 Answer

My remote seems to eat batteries. I will put new


you need to clean your remote with alcohol.open the remote and clean it with white alcohol,that should do it if not buy a new remote.you can probably get one at partstore.com..good luck.

Mar 01, 2010 | Panasonic EUR501455 Remote Control

1 Answer

Remote control not working properly


Try cleaning the contacts that connect to the batteries. A pencil eraser will clean the contacts.

Jan 27, 2010 | Televison & Video

1 Answer

Remote Contol will not work, though batteries are new and red light is blinking


if it is a universal remote just look up your t.v. in the instuction book that came with the remote,and follow the instructions in the book on how to put in the code for your t.v.

Jun 03, 2009 | Insignia I-LC23Q1 23 in. HD-Ready LCD...

2 Answers

Sony RM-Y180 remote control


Did you install the batteries correctly?
Some remotes (Universal) need to be re-programed when you install new batteries.
Go to remotefinder.rca.com/default.aspx?site=rca for proper codes.

Oct 30, 2008 | Sony RM-Y180 Remote Control

Not finding what you are looking for?
Philips DVDR3430V DVD Recorder/VCR Logo

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Jaime Hernandez

Level 3 Expert

2317 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...