Question about Office Equipment & Supplies
Canon Pixma ip1300 Ink absorber is saying is full what is the easiest way to solve this problem
Another solution for a quick override is to unplug the power lead from the back of the printer. With one hand hold down the power button on the printer whilst simultaneously plugging back in the power lead. When the light is back on, take your finger off the power button. You may need to press the power button once more, but this should 'override' the problem until the next time you turn your printer off.
Posted on Apr 16, 2008
Canon pixma ip 1300 ink absorber is full contact the service center how to solution
Posted on Nov 24, 2009
many problem that canon has give to us, but let me to try to give some advice for you
the trick is
Waste Ink Counter Reset. Manual for Service mode
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.)
should be orange.
5. Press and release the RESUME button again, the indicator
(L.E.D.) should be green
6. Release both buttons
and for the tool program i send you'll later after i receive your e-mail
just send me your email
but i hope the trick can solve your problem
Posted on Mar 26, 2008
Just open ur printer manually and clean the waste ink absorbing spunch with water ...it will become white... then put it back and close the printer, connect the power cord and data cable and enjoy printing
Posted on Jun 01, 2012
M. Irwan Darmawan
I have the same problem with my canom pixma 1300
I tried all of solutions on the site but it's still appear the same message
Please could you help me
Mettelus my email: email@example.com
Posted on Feb 06, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
open printer. with gloves or unless you don't mind getting your hands dirty, Open top of printer lid, carefully, pull out spongey grey piece at bottom of printer. to your left side is a piece of plastic, pull that off and below it is another sponge. Carefully pull this out as well. Wash and squeeze excess water. replace. YOU MAY WANT TO USE A FLASHLIGHT TO BE SURE YOU CAN SEE WHAT YOU ARE DOING. UNplug printer, hold button. restart, release button - as described above. Keep trying. Then do a bottom plate cleaning. keep trying eventually everything resets and you can continue working. To remove ink from hands and plastic, use alcohol.
then you will need to reset it this works on some canon printers not all
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..
Posted on Jul 21, 2009
Tips for a great answer:
Aug 07, 2011 | Canon PIXMA iP1300 Printer
Jun 13, 2011 | Canon PIXMA iP1300 Printer
Dec 12, 2009 | Computers & Internet
Jul 01, 2009 | Canon PIXMA iP1300 Printer
Jun 30, 2009 | Canon PIXMA iP1300 Printer
Jun 12, 2009 | Canon PIXMA MP760 All-In-One InkJet...
Feb 15, 2009 | Canon MP610 Photo All-In-One Printer
Jul 13, 2008 | Canon PIXMA iP3300 InkJet Photo Printer
9,923 people viewed this question
Usually answered in minutes!