Printer problem We are using HP office jet 5610 all in one... before some days we had disconnected the printer because of some printer problem again we connected it. but now we can print, but are not able to sent faxes and get copies from the same printer. so is there any connection problem or something else? infact we have removed colour cartridge. please help

1. Uninstall all the printer drivers (Software inclued)
2. Power cycle the PC
3. Re-install the drivers and software
4. Finally plug in the printer

The HP office jet 5610 should have an input USB socket, you need to connect camera to the printer input socket.
I see if I can find an illustrated guide on how to connect on the user manual.

purchased the HP 5610 Office jet Printer and the warranty is over now. I got the problem and the loca dealer has refused to repair the same due to non availability of logic card. Please suggest me how to get the logic card of 5610 and the cost of logic card. I belogns to Kurukshetra(Haryana). Pl. suggest me.

hi,
HP Officejet 5610 All-In-One InkJet Printer has few common problems. Such as Driver CD lost,Scanner does not work, Connection problem etc. For find all these software solution just clickhere....



http://www.hp.com/printer/prob676ijt65/solution

ab52

hi,
HP Officejet 5610 All-In-One InkJet Printer has few common problems. Such as Driver CD lost,Scanner does not work, Connection problem etc. For find all these software solution just clickhere....



http://www.hp.com/printer/prob676ijt65/solution

ab87

dear,
uninstall your drivers and re-install it,
hope your problem will solve
thanks

the CD you have is fine for 5610, HP printer drivers are desgin for printer series . ex: 56xx, 4000, etc. yo will not find driver for 5610, but 5600 series driver.

hi clik on the link & chose your OS

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=441125&lc=en&cc=uk&dlc=en&submit.y=8&submit.x=6&lang=en&cc=uk

regards

I can scan but I cant save it to my computer.. What will I do?

You can try resetting the printer.
Step 1. Unplug the power cord at the back of the printer while the printer is still on
Step 2. Press and hold the # and 6 button on the printer while the power cord is disconnected. And keep holdig the two buttons until you plug in the power back again.
Note : do not release the # and 6 when you plug the power cord back in. keep holding the two buttons until the printer would turn on then turn off or the printer would say anything about "reset"
Step 3. Try sending a fax after the successful reset of the printer