- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
just clean well ur phone pcb with iso propynal or acetone if not success u should keep ur pcb in mercury water solution for two day after that just clean again ur pcb with acetone etc. if not just reflash it 100% works.
Hi, This is 100% hardware problem,You phone LCD is perfectly working dont worry about it and also your phone.Please don't do software reset getting advice from any one and don't delete all your data.This is common problem that occurs in Nokia phone.
Have your dropped your phone?Yes your phone is dropped. Because this LCD problem occurs due to electrolytic capacitors is damaged.The damaged or loosened capacitors cause this problem.The power is supplied to the capacitors and it only fluctuates the the current to LCD display and then it supplies it to the transistor that generates the light to the pixels.
Replace the capacitors or the transistors.You can do continuity testing to find out which one of these is damaged and replace or re hot it accordingly.If you dont have hand on in it.You can please take it to the nearest service center.
Please do rate the solution if the issue is resolved or post a comment for further assistance.
Your display circuit is broken, even if the LCD-panel,
seems to be ok the display is damaged.
This is a very common problem in Nokia phones.
The only way to fix this is to change the display.
You need a T-6 Torx Skrewdriver to do the job.
You can find displays for fair price at :
This is your solution! Please vote!