Question about Samsung HLN5065W 50" Rear Projection HDTV-Ready Television

1 Answer

Negative image and then black and won't turn off!

I have a Samsung 50" with a model number HLN507WX/XAA and serial number 31EW900529N.
About a month ago it started giving me a negative image on the screen that would freeze and I would have to turn it off and wait for awhile to turn it back on. It would then work for a few days and do the same thing. Then it just didn't give a picture anymore. When you turn it on you can hear whining from the back and it sounds like it want to turn on, then you hear it cycle through again, all 3 lights on the front flash and eventually you hear a pop sound and then nothing. I have to unplug it to turn it off after that. I was going to replace the lamp but in the process of searching for a replacement cost came across this site and realized others had similar problems but with different samsung T.V.'s and slightly different problems.
Please any help would be appreciated.
I love the T.V., the picture is great when it works and I want to fix it, but don't want to fix the wrong thing if I don't have to.

Posted by on

  • 2 more comments 
  • Rick Cavanaugh Mar 27, 2008

    I am having problems finding the part, can you help me out with this. I can't even find a digital mirror board for sale.

  • Lailuma Apr 01, 2008

    i need to find the part , model # is PCN5425R

  • flyinmonkey May 08, 2008

    I have the exact same issue. I have contacted PTS Electronics and need to send the board to them for examination to see if it can be repaired. Is there an easy way to get to the board?

  • Anonymous Aug 11, 2008

    TV NOT COLOR

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 59 Answers

The negative image on the screen is the DMD board (Digital Mirror Board). The cycle sound is the color wheel trying to spin but if the DMD board is going bad, it will effect the color wheel and not spin. There for your image will freeze.

Posted on Mar 26, 2008

  • LeAnn Hill
    LeAnn Hill Mar 27, 2008

    Sometimes the DMD board can be repair. But do understand not all can be fixed. I have seen them on Ebay for sale at the best prices.

  • LeAnn Hill
    LeAnn Hill Mar 27, 2008

    OH also at www.ptscorp.com can repair them too.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MY SAMSUNG HLN 507 WX/XAA T.V. IS MAKING A WHINING SOUND WHEN I TURN IT ON


Your color wheel is going bad, when it fails the TV colors will be way off and it will shut down. They range from $50 -$125 . Here is one for $98 for your tv. http://www.amazon.com/Projector-Replacement-Samsung-HLN507WX-HLN567/dp/B00HJOLQ7G

Jan 09, 2015 | Samsung Televison & Video

1 Answer

I have a samsung HP T5054 plasma tv and today, out of nowhere, a vertical black stripe about 2 inches wide, appeared on the screen. Turning off and restarting does nothing and the scrolling feature to...


There is a possibilty its just a defective address board thats causing the issue. Can yoiu reply to my email address tvtek(at)msn.com with the complete model which will be on the side of the TV. It should be something like HPT5054X/XAA and I also need the serial number. Is the black bar on the left, center or right side of the screen? I need all that information to further assist...

Jun 29, 2010 | Televison & Video

1 Answer

Picture is black and white and fleckers. changed


In most cases this is due to the fact that the color wheel has shattered into pieces and will need to be replaced. Replacing the color wheel is not too easy, but if you are technically handy it isn't that tough to replace either. The part number for the color wheel is BP96-00250A and will run between 80-130 dollars for the part.

Nov 11, 2009 | Samsung HLN5065W 50" Rear Projection...

4 Answers

SAMSUNG TV WONT TURN ON JUST CLICKS


I just fixed this very same problem. The capacitors are the problem. However, I think that if you have some minimal skills with soldering, you can fix this yourself. You just need to take out the system board, then the power supply parts are on the top right. The bad capacitor(s) will be bulging at the top and possibly have some brown stuff coming out. The ones that go bad are 1000microfarad, 10V, however you can replace them with higher voltage. I got 35V caps from radio shack for 1.59 each. You just need to solder out the bad ones and then put the new ones in and solder. Remember that the negative end goes on the side with the bold black part of the circle on the system board. Then just cut off the extra ends of the capacitors. If you are capable of doing this yourself, you will spend at most 6 dollars instead of however much a technician costs.

Sep 24, 2009 | Samsung LN-S4041D 40 in. LCD HDTV

1 Answer

Comcastt HD Box indicates "Component 3 - Not supported mode"


Try HDMI if the TV has the inputs or swap the component cable.

Jul 02, 2009 | Samsung HLN5065W 50" Rear Projection...

1 Answer

Samsung HLN507WX/XAA - Bad Picture


its sounds more like the digital board that needs to be replaced

May 04, 2009 | Samsung HLN507 50" Rear Projection...

4 Answers

Tv freezes white and black negative image


Yes the digital board is the culprit. I need the complete model number so I can get you the correct part number. On the right hand side of the TV is a sticker with the model/serial and sometimes a version number. Get me all those and I will look up the part number.

Mar 18, 2008 | Samsung HLN5065W 50" Rear Projection...

1 Answer

Samsung HLN507WX 50 rear projection


do you hear if the color wheel has been whining loudly?
clean the fans from dust.

Jan 20, 2008 | Samsung HLN5065W 50" Rear Projection...

Not finding what you are looking for?
Samsung HLN5065W 50" Rear Projection HDTV-Ready Television Logo

318 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72620 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...