Question about Washing Machines

1 Answer

Maytag atlantis machine will not agitate,pump out water or spin.It will take on more water if you reset the water level.The lid switch checked out properly with a meter. I pumped the water out with a shop vac and removed the belt to see if the motor would work with out any load on it

Posted by on

  • bigwillyc58 May 04, 2010

    The motor is not running at all. I am not sure if the timer is operating properly to tell the motor to operate

  • Rick Ead
    Rick Ead May 11, 2010

    can u hear the motor working at allin the unit if it is then replace drive couple if not replace motor

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,998 Answers

If you can hear the timer making the clicking sound then you most likely have a bad motor you can look up marcone or allbrandsappliance there open from 9-5 m-f and sat 9-2 they can also mail you the part directly to you location hope this helps if the motor was working then id say look at your drive couple but its not so go with the motor

Posted on May 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My Maytag washer agitates, and will pump during the spin cycle but will not spin


Check the lid switch is operating. It will not spin for safety reasons if it thinks the door is open.

If the switch is good test for power at the wigwag (spin) solenoid when in spin cycle. Since it agitates the solenoid itself could be bad.

Thanks for using FixYa - a Very Helpful rating is appreciated for answering your FREE question.

Aug 02, 2009 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Maytag top loader washing machine


i believe i can help you,,but washers dont agitate in the spin cycle,,i believe you ment it wont wring or spin in the spin cycle..your lid switch is defective,,replace,,if need be i can talk you though,,onthejob

Dec 28, 2008 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Will not complete cycle


hi. i would check the lid switch fill the tub to low level let it start to wash stop the washer now put it to the spin cycle pull out knob close the lid slowly if it does not pump replace the lid switch now push on the lid. if it goes now .replace the lid switch .thanks te appliance doc. rate me please

Aug 22, 2008 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Maytag Atlantis MAV6451 Waterfill keeps filling


hi todd it looks to me that the problem with the water level control or the small level control hose hard water &lint can sometimes clogg this hoe up remove hose from switch and blow into it hard if its clogged you will not be able to blow clean it and try if it does not work after its clean replace water level switch thanks the appliance doc

Aug 09, 2008 | Maytag Atlantis MAV6451 Top Load Washer

1 Answer

Maytag Atlantis top load washer fails to spin out and stands with tub full of water until timer is reset to spin


if the washer is sounding like it its spinning check the pump for a blockage

if it is not spinning check the lid switch

Apr 30, 2008 | Washing Machines

1 Answer

Water fills but does not agitate or spin


THIS UNIT HAS A DOOR SAFETY SWITCH WICH ALLOWS WATER TO COME IN BUT NOTHING ELSE TO HAPPEN IF THE DOOR IS OPEN I WOULD START BY CHECKING THIS SWITCH.

Nov 29, 2007 | Maytag Atlantis MAV6260AWW Top Load Washer

1 Answer

Maytag wahser not agitating


Either your transmission is bad which might carry a 5 year warranty or your lid switch needs replacement

Nov 14, 2007 | Maytag Atlantis MAV9750A Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...