Question about Bosch SHU4006 Dishwasher

Open Question

My bosch dishwasher model shu4022uc/u06 dlx series gets stuck between rinse and drying cycle. if you turn dail a hair it will finsh complete cycle.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 213 Answers

SOURCE: test bosch heating element

remove the kick plate at bottom of dishwasher, at the left leg there will be a wiring diagram. remove console and test element from there. diagram will show which wires to test

Posted on Nov 20, 2007

  • 109 Answers

SOURCE: Bosch SHU430UC/06

ok first of all there is a drain pump and wash motor pump. which one is running?Then tell me what kind of buttons u have.Are the touch buttons or plastic buttons that move

Posted on Dec 15, 2007

SOURCE: she47c0 bosch dishwasher won't stop

You're hosed.  This is likely a bad control board module that can run you in excess of $200.  Even if you're within Warranty, Bosch will gouge you for labor, as that is NOT covered by warranty.  Top that with abysmal customer service and you're in for a world of hurt.  Sorry, but it's time for a new dishwasher. :(

Posted on Oct 28, 2008

dragonsthatk
  • 547 Answers

SOURCE: SHU4302UC/U06 runs for hours. What's the fix?

timer

Posted on Feb 18, 2009

  • 98 Answers

SOURCE: Bosch SHX33A runs continuously. Never finishes cycle.

I have a guide here to walk you through the process of clearing the drain system. You most likely have a clog somewhere and the dishwasher can't proceed because it would cause it to flood.

Posted on Jul 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bosch Dishwasher Model SHU5315UC/U06 Looking for Cycle Buttons That are no longer avail #176079


There are several places on-line where you can find this parts. Depending on where you are. For example you can look up www.dlpartsco.com

May 08, 2016 | Bosch Dishwashers

1 Answer

Bosch end cycle beeping


The Self-Help section in your manual states you can adjust the volume or deactivate the beeping signal. Instructions on how to do so are supposed to be in the "cycle completion signal" section of the manual which it appears the tech writers forgot to include in the published version of the manual. I have not worked with this particular model so your best option now is to call their customer service number and talk to someone that knows how to turn it off. FYI, their customer service phone number is 800-944-2904.

Sep 02, 2012 | Bosch SHE3ARL2UC 24" DLX Recessed Handle...

1 Answer

Unknown control panel symbols bosch dishwasher super silent


Wash Cycle Options

Delay Start (model dependent):



This option allows you to delay the start time of your dishwasher up

to 19 hours.

Sanitize:



The Sanitize feature is available only in the Heavy, Auto, Normal and Half Load cycles. Press the

"Sanitize Option" button to activate the Sanitation features during these cycles. The technical sanitation

measures may also improve the drying results. The sanitize LED or The "Water Pipe" symbol will light when sanitation

requirements are met.

Note: The dishwasher automatically defaults to Auto Wash when turned off and back on. If you used the sanitize option
in your last cycle, the dishwasher will default to Auto Wash with the Sanitize option selected when you turn it on.

To achieve proper drying, always use a liquid rinse aid, even if your detergent contains a rinse aid or

drying additive.



Note: The dishwasher indicates low rinse aid by turning on the Refill Rinse Aid indicator LED (for units without

a display) or The "Spray Looking" symbol (for units with a display).

If this light is on, you need to refill the rinse aid dispenser

I got the idea that the "squiggly arrow" has something to do with the sanitize feature also. If you post your model number "on the inside right hand side of your dishwasher door" I'll go get your manual and post the link here. Hope this helps so far! :)

Jun 18, 2012 | Bosch 500 Series SHX55R55UC Fully...

1 Answer

I have a bosch dishwasher shu6805uc/u06 to long to wash.


Well not going into the dry cycle could be a timing issue or a EOC (control panel) issue and will need to be addressed. But most dishwashers these days have a active run time during normal cycle of 110 to 120 mins, and thats not including the heated dry feature. I would let the unit run and see if it will finish on its own, and if I say it pushes two and half hours then something is wrong. A tech would most likely have to look at it, also a power reset could help but thats like a 30% chance.

DrakeTech

Dec 30, 2009 | Bosch 24 in. SHU66C02 / SHU66C06 Built-in...

1 Answer

Dishwasher stalls


If the cycle doesn't complete, check these:

Water-heating cycle
Timer
Water-heating cycle Many dishwashers heat the wash and/or rinse water to a higher temperature, as the cycle calls for it. In these cycles, the dishwasher pauses after it has filled with water, waiting for the water to reach the pre-set temperature. What happens next, depends, as follows:

  • On some units, the pause is timed and the unit continues after the allotted time.

  • On others, the cycle can't continue until the water reaches the higher temperature. If you have this type of dishwasher and the water isn't being heated (say, because of a problem with the heating element or thermostat), after the unit stops at the heating cycle, it never continues. When you repair the heating-system problem, the "cycle problem" is fixed too.

Timer Timers don't often fail. But if every other part of the dishwasher seems to be working properly and the timer knob seems to be stuck in one place--doing one function continuously--the timer may be at fault. Dishwasher timers can't be repaired. If yours is defective, replace it.


May 31, 2009 | Bosch SHU4006 Dishwasher

2 Answers

Dishwasher stalls


SOUNDS TO ME YOUR CONTROL MODULE IS NOT WORKING CORRECTLY

Apr 07, 2009 | Bosch SHU4006 Dishwasher

2 Answers

Dishwaser is stuck in Rinse/Dry cycle


It could be a sensor or timer solenoid in the dishwasher maybe broken and needs replacing.
http://www.repairclinic.com/bosch-dishwasher-parts-gg.htm

Apr 05, 2008 | Bosch 24 in. SHU43 Built-in Dishwasher

1 Answer

Test bosch heating element


remove the kick plate at bottom of dishwasher, at the left leg there will be a wiring diagram. remove console and test element from there. diagram will show which wires to test

Nov 16, 2007 | Dishwashers

1 Answer

Dishes and inside the washer are not drying


Make sure that the drain hose is connected as per manufacturer instructions, and that there isn't a direct run down from the sink u-bend to the machine. The rinse agent effects dishes dry but has nothing with the water remaining in the machine. Good luck!

Sep 15, 2007 | Bosch 24 in. SHU66C02 / SHU66C06 Built-in...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

348 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Dishwashers Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

shaun taylor

Level 3 Expert

1525 Answers

Are you a Bosch Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...