Installation of pump for bissell steam cleaner

Either it is installed incorrectly or there may be a leak or clog before or after the filter. Double check your connections and check for clogs.

Calcium Water Filter for Bissell Steam Mop Cleaners

800-775-6586
GoodVac com

Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101

kjgtllgj

Most likely the pump belt is worn and needs to be replaced. Here is the belt you need:

Bissell Proheat Pump Belt

If you go to http://www.bissell.com/customer-support/ and type in the specific model number of your Bissell in the space headed by "Find Replacement Parts & Download User Guides", it will provide you with a list of documents for your model. This is presuming that your model is not too old.

When water doesn't disperse that means that the pump belt is worn, stretched or broken. You can get belts and view the manual here:

Bissell ProHeat Belt and Manual

Listen to see if you can hear pump run when pressing button, if the pump does run, than either you have a clogged nozzle or screen in water fill compartment.

Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101

hjjfh

The pump may spin but the vanes inside could be broken or worn enough that they are unable to push water through the pump system. I am repairing a Bissell Model 8920 Pro-Heat 2X that has this very same problem.

I tested all the hoses to verify that they were not plugged. I then hooked the water and cleaner tub from the rear directly to the pump and held it above the pump assembly and water barely went through it with gravity feed and the pump was visibly spinning. The pump assembly can be acquired from AE Carters for $10.00.

I do not give any guarantee that this is the only problem.

Ron Goodrich

Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101
yolo

need belt on brush