Question about Lexmark T652DN MONO LASER PRINTER All-In-One

1 Answer

My Lexmark T652 network printers would drop off a network once it goes into sleep mode, when I type the DSN name of the pritners it will not show up on my network. but when I type in the I.P address then I would beable to acces the printers web GUI. anyone have problems like this or what is a way to fix it?

Posted by on

  • meng21 May 07, 2010

    I don't think it has to do anything with the NetworkCard Assembly because so far I'd have installed 8-10 of theses printers across our network. so I think I can eliminate tht it is a network card assembly simply because it is happening to all the printers.

  • meng21 May 10, 2010

    ummmm Its not at the driver level yet. It has to do with the network. DNS, as I'd said the Printer Network properties was configured with a static I.P address, Static DNS & Wins along with a printer naming convention. The problem is I cannot type in the printer's Name, I'd would have to type the printers I.P address. The drivers thats another story.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Lexmark Expert
  • 217 Answers

It seems you have a problem with your network card assembly. Try replacing it.

Posted on May 07, 2010

  • Gerrit Jan May 10, 2010

    Sorry i misread your problem. Thought its was just one printer. Did you already try an other driver, or did you reinstall the driver?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pro 901 network busy


This could be a driver issue. Please update your printer driver. Visit the Lexmark website to download and install the Lexmark Pinnacle Pro901 Printer Driver on your computer. Select your operating system > click on "FILTER" > click on the driver under Recommended Downloads > download and execute the file. Simply follow the instructions on your computer screen to complete the installation.

If the problem happens when the printer goes on sleep mode, make sure that your printer firmware is updated. Visit the Lexmark website to download and install the Lexmark Pro900 Series Firmware Update.

Feb 18, 2012 | Lexmark Pro901 All-In-One Inkjet Printer

1 Answer

Lexmark t652 200.13 paper jam checked all things


This article outlines the steps to troubleshoot, Please visit the link http://bit.ly/lzMQs8
For further assistance please contact Lexmark Technical Support

Jun 26, 2011 | Lexmark T652DN MONO LASER PRINTER...

1 Answer

Papaer jam "check duplex"


Here's an article in the Lexmark website on Paper Jams and the Printer Displays a 'Check Duplex' or a '23x' Type Paper Jam Message: Lexmark T650, T652, T654, or X65x Series Printers. Just click on this link: http://bit.ly/aqGjtK. Read the instructions thoroughly. Hope this helps but if you need more assistance, don't hesitate to contact Lexmark Technical Support. Thanks.

Jun 25, 2010 | Lexmark T652DTN MONO LASER PRINT Printer

1 Answer

Lexmark Optra M412 pritner find IP address


Have you printed out the printer's Menu Settings?

Jun 30, 2009 | Lexmark Optra M412 Laser Printer

1 Answer

User's Guide does not contain software installation instructions.


Hello,

I would recommend you to reinstall the driver from the below link. also if you click on Technical support - How to install downloaded driver it will show you how to install it.
-http://www1.lexmark.com/products/view/All-in-Ones/Lexmark-X6570/catId=cat10004-category&prodId=4165-product;jsessionid=36351499255753845B8F3686DDD5E41C.node3

Also in the related links there's user guide for the Printer. it has instruction on how to configure network on your printer.

Please let me know if you have any further questions or concerns.

Thanks.

Mar 16, 2009 | Lexmark X6570 InkJet Printer

1 Answer

Tally T8106


The T816 can be used with Vista and XP over a Ethernet connection....You will not however be able to 'discover' the printer on the network.You need to set an IP Address in the printer or if the printer has been allocated a DHCP address you would need to find out what address has been allocated.
Once you know the IP Address you would need to install the printer on a PC/Server then share it to other users to be able to 'see the pritner on the network'

Once the pritner driver has been installed you can create a network port in the pritner driver to print to the IP Address of the pritner in the follwing way (on XP, Vista will be simmilar)


· Open PRINTERS folder
· Right Click on the printer driver for the T8106
· Select PROPERTIES from pop up menu
· Click on the PORTS tab
· Click on the ADD PORT button
· Highlight STANDARD TCP/IP PORT
· Click on NEW PORT
· This should open the TCP/IP Printer Port Wizard, work through this entering the IP Address and Port Name. Windows may try to detect the port configuration required.
· If the type of port is not automatically detected click on the CUSTOM radio button.
· Click on the SETTINGS button
· Change the PROTOCOL to LPR
· Under LRP SETTINGS enter the Queue Name as PASS
· Click OK.
· Click NEXT and then FINISH to finish the TCP/IP ports wizard.

Oct 27, 2008 | Tally T8106 Laser Printer

3 Answers

Lexmark 5400 series


Problem: Lexmark cannot retrieve applications list

I have the Lexmark X3550 with the WiFi option board installed (makes it same as the model X4550) and get the “cannot retrieve applications list” message on one of the five computers connected to my router (Linlsys WRT54G V8) and using wireless printing and scanning. Just like everyone else with a similar Lexmark WiFi printer/scanner, I can print wireless, but cannot get the wireless scanner to work on one of my PCs.

The fix, in my case, was to change the Lexmark network name as follows.

1. Launch Lexmark Imaging Studio.
2. Right-Click on “View or change network settings”.
3. Enter a new network name in the first box shown. (This box contained the correct network name for my PC, but another name was needed to make the scanner work. I simply added “-lex” at the end of the current network name.)
4. Right-Click OK. You should return to the Imaging Studio screen.
5. Close the Lexmark Imaging Studio window. (The tray icon should remain at the screen lower right.)
6. On the printer, press the Scan Mode button.
7. On the printer’s display screen, select the Computer Name that you entered for the new network name. Just use the arrow buttons until the exact name is shown.
8. Press the Check button. The display screen should show “Downloading Applications List”. Within about 10 seconds the message should change to “ *Scan to Computer ”. Wireless scanning should now work.
9.. Press the Start Color or Start Black button. “Requesting Scan” will be shown. After a few seconds scanning will start. The process is a bit slow.
10. After a while you may see an empty small Lexmark window onscreen. Later, the Lexmark Imaging Studio will appear onscreen, then change to show many options and features. An image of the scanned item will appear in a Lexmark window. Save and/or edit the image. Another scan can be done by pressing the printer’s Check button again. Be sure the correct computer name is shown on the printer’s display.

That’s it. A new computer name was the solution. Your PC and printer may require a restart (power off) after changing the “computer name”.

Regards, Fbyrd

Mar 12, 2008 | HP PSC 2210 All-In-One InkJet Printer

8 Answers

"Scan Request Failed"


Problem: Lexmark cannot retrieve applications list

I have the Lexmark X3550 with the WiFi option board installed (makes it same as the model X4550) and get the “cannot retrieve applications list” message on one of the five computers connected to my router (Linksys WRT54G V8) and using wireless printing and scanning. Just like everyone else with a similar Lexmark WiFi printer/scanner, I can print wireless, but cannot get the wireless scanner to work on one of my PCs.

The fix, in my case, was to change the Lexmark network name in their Imaging Studio application. This worked for several weeks, but now I get the “cannot retrieve applications list” message again. I have not fixed the new error yet, but changing the network name may work for you. Here are the steps to change the Imaging Studio network name.

1. Launch Lexmark Imaging Studio. (Double left-click on its icon)
2. Left-Click on “View or change network settings”.
3. Enter a new network name in the first box shown. (This box contained the correct network name for my PC, but another name was needed to make the scanner work. I simply added “-lex” at the end of the current network name.)
4. Left-Click OK. You should return to the Imaging Studio screen.
5. Close the Lexmark Imaging Studio window. (The tray icon should remain at the screen lower right.)
6. On the printer, press the Scan Mode button.
7. On the printer’s display screen, select the Computer Name that you entered for the new network name. Just use the arrow buttons until the exact name is shown.
8. Press the Check button. The display screen should show “Downloading Applications List”. Within about 10 seconds the message should change to “ *Scan to Computer ”. Wireless scanning should now work.
9.. Press the Start Color or Start Black button. “Requesting Scan” will be shown. After a few seconds scanning will start. The process is a bit slow.
10. After a while you may see an empty small Lexmark window onscreen. Later, the Lexmark Imaging Studio will appear onscreen, then change to show many options and features. An image of the scanned item will appear in a Lexmark window. Save and/or edit the image. Another scan can be done by pressing the printer’s Check button again. Be sure the correct computer name is shown on the printer’s display.

That’s it. A new computer name was the solution. Your PC and printer may require a restart (power off) after changing the “computer name”.

Regards,
Fbyrd99

Oct 23, 2007 | Lexmark X3550 All-In-One Printer

Not finding what you are looking for?
Lexmark T652DN MONO LASER PRINTER All-In-One Logo

Related Topics:

474 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...