Question about Samsung TXK3676 36" TV

1 Answer

I have a tXK4676 and it has started making a clicking sound at the rear of the tv. When this happens the screen will momentarily blink and the sound cuts off and on. Is the screen trying to go out? Or is there something else wrong?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 111 Answers

It sounds like the power supply clicking in the back,usually where the vents slits are. this is can lead to the TV not powering up in the future. the noise can be a bit loud at times i imaging. this might sound a bit weird, but have you tried just giving the TV a whack when the noise starts. a wire or adapter could be a bit loose and sometimes all the need is just a bit of vibration to get back into a usable place

Posted on May 03, 2010

Testimonial: "Thanks for you assistance and timely response, I will try what you have recommended. If that doesnt work then I guess I will have to replace the p sup"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lg led tv doesn't turn on


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices....
http://electro-medical.blogspot.com/
If blinks continue without any pause, the main board is faulty.

Jun 20, 2016 | LG Televison & Video

1 Answer

Kf-50sx300u rear projection tv just makes a click sound then powers back off . why ?


You are in shutdown--something in power supply or elsewhere is bad.

Set should have a LED or light on front that blinks when this happens and it will blink a specific number sequence.

Apr 19, 2012 | Televison & Video

2 Answers

Screen and sound problem?


sony 2005 kdf e60a20 tv---turns on and off every 2-3mins...green power lite stays on no blinking

Mar 27, 2010 | Sony KDF-E60A20 60 in. LCD HDTV

1 Answer

Powers on- no picture no sound blinks 46555


Projection TV sets are known to have two common problems. The first problem that is common to these sets is convergence failure. When this happens the TV will usually look 3D, Wavy/Distorted, etc. It may also shutdown and blink an error code.

The second common problem with Projection TV sets is dull video, halos around objects, white looking video, or red overpowers the screen. This is commonly caused by the fluid in the lens being clouded over.


You can find more details and solutions here on Fixya at the following link below. Or click HERE

3d884ac.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Jan 30, 2010 | Panasonic PT-53WX42 53" Rear Projection...

1 Answer

65 in Mitsubishi rear projection tv won't power on.


Go to the set and when turning it on doesn't work push and hold down the MENU and INPUT buttons at the same time until the LED starts blinking. It should be a two blink sequence like 1 blink pause 2 blinks long pause and then repeats. Repost the blink sequence and that will narrow down what the microprocessor thinks is the problem area.

Jun 09, 2009 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

Panasonic projuction screen tv.


3 blinks is the error code for the convergence ICs. You need to replace both STK392-110 convergence ICs. You can get replacement ICs at the following link and they provide installation instructions with pictures.
http://servicemanuals.vstore.ca/

Oct 12, 2008 | Panasonic PT-47WX42 47" Rear Projection...

1 Answer

Theatre View Toshiba Rear Projection TV 50 Inch with no sound or picture and a red light keeps blinking


I have the sames t.v you have to go in the back flip the power cord switch...then reboot the t.v.

Jun 27, 2008 | Televison & Video

1 Answer

No sound, No video, power LED blinking 3 times


had the same problem with mine and I replaced horizontal deflection transistor located by the high voltage tranformer, its the big transistor by the heatsink, check for any shot and replace if you find problem. worked for me

Apr 15, 2007 | Panasonic PT-53TW53 53" Rear Projection...

Not finding what you are looking for?
Samsung TXK3676 36" TV Logo

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73635 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...